Micro Glass Fibre Media HEPA Filter, Flow Capacity Range : 0-500 Cfm

Micro Glass Fibre Media HEPA Filter

Application :

These Filters are Used for Nuclear Installation Clean - Room Systems. Pharmaceutical industry, Laminar Flow Working Bench, Hospital Sterile areas, Space application Food processing zone, Biological Centre and many More. Media : Water and fire proof 100% Micro Fibre Glass paper in pleated from. Tapered aluminum safe edge separators design that provides significant advantage controlled media spacing for virtually no turbulence low friction, uniform velocity, uniform dust holding, optimum filter performance Reasons of areas with an important need for eliminating submicron particles could be shelters gas masks, optic and precision mechanical production, sensitive electronic components computer, nuclear installation clean room systems pharmaceutical industry laminar flow working bench, hospital sterile areas, space application food processing zones, biological centre and many more. Air filters with an extremely high collecting efficiency were required for above specific areas. The Absolute (HEPA) Filter consist of frame in which the media is inserted is highly folded form. The filers are held open by corrugated separators. The media is produced from highly waler repellent and temperature resistant 100% microglass, High Strength fiber paper. The folded configuration provides an exceptionally large filtering area in proportion to the face area of the filter.Separator design that provides significant advantage controlled media sparing for virtually no turbulence low friction uniform velocity, uniform dust holding optimum filter performance.

The Air Velocity through the media is very low, normally about 2-2.5 cm/sec. The separators are safe edge tapered aluminum or plastic. The absolutes are supplied as standard with gasket of either closed cell neoprene are if desired and at on extra charge with silicon gasket. The gaskets are provided at air entry side and air exit side.

The Sealer between the filter media and the frame is of neoprene rubber base silicone glue, urethane compound or ceramics according to the temperature requirements. Absolute filters are available with same of extruded aluminum untreated or stainless sheeting for special application.

Product Description

Type of Air Filter stand for High Efficiency Particulate Air

Mostly find application in Medical Facility,Automobiles, HVAC system.

HEPA filter are composed of a mat of randomly arranged fibres.The fibres are typically composed of fiberglass and possess diameter between 0.5 @ 2 micrometer.

Key factors affecting its functions are fibre diameter,filter thickness & face velocity.

Having efficiency of 99.97% against 0.3 micron particle

Features

Type:Flat Mesh Panel

Frame:Galvanized Steel, Aluminium and Stainless Steel

Filter Media:Synthetic Fiber

Grids:Aluminium Mesh And Stainless Steel Mesh

EN 779 Class:G2-G4

Average Arrestance:74%-94%

MERV:MERV 3???8

Final Pressure Drop:(Recommender) 150Pa -

Maximum 250Pa

Max. Air Flow Rate:125% of Nominal Air Flow Rate

Max.Operating Temperature:100

Max.Relative Humidity:100%

Applications:Coarse Particle Filtration