Series CDX Wall Mount Carbon Dioxide Transmitter (Series CDX Wall Mount Carbon Dioxide Tra)

series cdx wall mount carbon dioxide transmitter (series cdx wall mount carbon dioxide tra)

measures up to 2000 ppm, adjustable output

the series cdx carbon dioxide transmitter is a low cost and high performing co2 sensor. This product will provide immediate energy savings by functioning in conjunction with building automation systems and allowing the user to effortlessly and effectively control fresh air into preferred areas. On-demand ventilation using co2 sensors prevents energy losses from over ventilation while maintaining indoor air quality. The potential for the greatest energy saving occurs in areas where occupancy alters over the duration of the day. The series cdx transmitters utilize the patented automatic background calibration (abc) logic self-calibration system. Abc logic virtually eliminates the need for manual calibration in applications where the indoor co2 level drops to outside levels during unoccupied periods. If the transmitter is being used in an application where a building is continuously occupied 24 hours per day, then the user will permit that the abc logic feature be turned off.

product applications

on demand ventilation

model           description

cdx-2e10co2 ventilation controller with current wiring, european housing

cdx-2e20co2 ventilation controller with voltage wiring, european housing

cdx-2w10co2 ventilation controller with current wiring, north american housing

cdx-2w20co2 ventilation controller with voltage wiring, north american housing

specifications

range:0 to 2000 ppm.

accuracy:±30 ppm or 3% of reading, whichever is higher. Co2 accuracy statement excludes standard gas used for calibration that has an accuracy of 2% and there is a potential digital to analog error of up to 1%.

temperature dependence:0.2% fs per °c (± 0.11% per °f).

stability:< 2% of fs over life of sensor (15 years).

pressure dependence:.135% of reading per mm of hg.

response time:5 s.

warm up time:< 2 min (operational), 10 min (max. Accuracy).

temperature limits::operating: 32 to 122°f (0 to 50°c); storage: -40 to 158°f (-40 to 70°c).

humidity limits:0 to 95% relative humidity, non-condensing.

power requirements:18 to 30 vac rms, 50/60 hz, or 18 to 42 vdc, polarity protected.

power consumption:.7 w @ nominal voltage of 24 vac rms.

sensor:non-dispersive infrared (ndir) absorption.

output:analog, 0 to 5 v or 0 to 10 v jumper selectable (100 ω output impedance), 4 to 20 ma (rl maximum 500 ω).

housing:flammability classification ul94 5va.

weight:european housing: 5.44 oz (154 g); north american housing: 6.24 oz (177 g).

agency approvals:ce, rohs.

accessories

model numberdescription

1552outside air measurement enclosure

related products

series cdt carbon dioxide/temperature transmitter

series cdt carbon dioxide/temperature transmitter

series cdtr carbon dioxide/rh/temperature transmitter

series cdtr carbon dioxide/rh/temperature transmitter

certification : yes

brand name : dwyer usa

pressure : 135% of reading per mm of hg.

condition : new

type : series cdx wall mount carbon dioxide transmitter

use : on demand ventilation

form : gas

state : delhi