ZC 678 Anti Corrosion Bright Zinc Coating

Listing ID #5589797

Features of ZC 678 Anti corrosion Bright zinc coating

• ZC 678 Anti corrosion Bright zinc coating is Inhibits rust and corrosion on ferrous metals. Stops rust and corrosion on any iron or steel surface, Provides the appearance of a hot-dip galvanised,
• Highly resistant to scratching, denting, abrasion, corrosive environments, salt air, heat, moisture and road salts.
• Quick-drying
• Non-sagging touch-up of damaged galvanising
• Its galvanic action ensures better self-healing and sealing

Application of ZC 678 Anti corrosion Bright zinc coating

• Bright-Zinc is the original metallic silver colour zinc-rich coating that has been used on towers, power generators, farms, fencing ,Air conditioning equipment / ducts, satellite, antennas.
• It is used as an anti rust primer on vehicle bodies.It forms a protective coating on welded and drilled section.
• Used in Marine works and ship manufacturing parts and repairing. also used in heavy equipment, pipes, transformers, electrical poles, threads, welds, automobile, Metal chain fences, storage tanks etc.
• They are invaluable for use in : Construction Agriculture, Local authorities, Railway, Welding, transport, Automotive, Engineering,

Direction of ZC 678 Anti corrosion Bright zinc coating

• Surface should be dry and free of rust bloom.
• Shake well until agitator ball is free.
• Repeat while using. Best results are obtained when sprayed above 60º F. Spray from 12-15 inches away in light, even coats.
• The optimum film thickness for Bright Zinc is 1.5 to 3.0 mils of dry film.
• To obtain this thickness via aerosol application, 3 passes of spray are required.
• Spray the substrate once vertically, once horizontally, and once more vertically for ideal coverage.
• Additional coats for heavy film can be applied when first coat is dry. For a thickness of 3 mils, repeat the above spray pattern twice.
• When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
• If clogging occurs, remove button and clean slot and orifice with fine wire.

Precaution of ZC 678 Anti corrosion Bright zinc coating

• Contents are Extremely Flammable and Under Pressure.
• Do not punctured , may explode if heated. Do not apply while equipment is energised, Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components.
• Prevention : Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Pressurised container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source,live circuits.
• Harmful in contact with eyes. Prolonged exposure may cause chronic effects.
• May cause drowsiness and dizziness
• Response : IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention.
• Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Storage of ZC 678 Anti corrosion Bright zinc coating

• Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122 °F. Store in a well-ventilated place. Keep container tightly closed.
• Keep Out of Reach of Children.