Progressive Engineers

Chanod, Vapi, Gujarat

Our well-reckoned entity is earnestly engaged in supplying Thinner (4354) in Maharashtra, India. The 4354 Thinner is a slower drying thinner, for use with the MG Chemical's urethane and acrylic conformal products. This thinner has an excellent solvent strength, making it a good oil and grease remover. It has very low water solubility, so it is unlikely to absorb water and create blush. It's drying speed is slow enough to promote an excellent levelling, but it is fast enough to accommodate a reasonable assembly line speed.

Features :

• Blush Resistant
• Slow Evaporation Rate
• Good Levelling and Gloss
• Highly Miscible with Other Common Organic Solvents
• Compatible with most substrates used in electronic parts and enclosures

Thinning Instructions :

• Make necessary adjustments according to your paint and spray gun equipment usage instructions.

• A 1.0 (paint):1.0 (thinner) dilution is a common starting point. If sagging is observed, reduce the thinner ratio.

We are counted amongst the prominent Suppliers of Thinner (4351) in Maharashtra, India. The 4352 Thinner 2 is a moderately fast drying thinner for use with the MG Chemical's conformal products. It is compatible with the film forming paint products with acrylic, alkyd, cellulose acetate butyrate, epoxy, nitrocellulose, or polyester resins. Together with these types of resin systems, the 4352 thinner promotes good flow properties and suppresses blushing.

Features :

• Plastic Safe: compatible with most sensitive substrate used in electronic parts and enclosures
• Blush Resistant
• Moderate Evaporation Rate
• Excellent Levelling and Gloss
• Not Classified as a "Hazardous Air Pollutant"
• Highly Miscible with Other Common Organic Solvents

Thinning Instructions :

• Make necessary adjustments according to your paint and spray gun equipment usage instructions.
• A 1.0 (paint):1.0 (thinner) dilution is a common starting point. If sagging is observed, reduce the thinner ratio.

We are a dominant Supplier of Acetone Thinners (434) in Maharashtra, India. The 434 Acetone is a super-fast drying, VOC-exempt, and zero residue solvent. It is very useful for 3D printing because it can be used to improve the adherence to the ABS plastic to the printing bed. The acetone vapours can also be used to smooth the surface of the finished 3D printed pieces. It can be used as a diluent to meet the VOC regulations or to clean hard to delete organic residues. The fast drying time of the 434 makes it a good choice for spray application that requires a low VOC and quick drying times.

Features & Benefits :

• Enhances Adhesion to the Print Bed for 3D Printing
• Smooth Finishing of 3D Printed Pieces
• Highly Miscible with Other Common Organic Solvents
• Fast Evaporation Rate
• VOC Exempt
• Attention - It is preferable to use this thinner system in a temperature controlled environment. Avoid high temperatures or humidity, which can lead to dry spray and blush respectively.

We are a major Supplier of Liquid Acetone. The 434 Acetone is a super-fast drying, VOC-exempt, and zero residue solvent. It is very useful for 3D printing because it can be used to improve adherence of the ABS plastic to the printing bed. The acetone vapours can also be used to smooth the surface of finished 3D printed pieces. It can be used as a diluent to meet VOC regulations or to clean hard to clean organic residues. The fast drying time of the 434 makes this a good choice for spray application that requires low VOC and quicker drying times.

Features & Benefits

• Enhances Adhesion to the Print Bed for 3D Printing
• Smooth Finishing of 3D Printed Pieces
• Highly Miscible with Other Common Organic Solvents
• Fast Evaporation Rate
• VOC Exempt

We are a giant Supplier of Acetone Thinner (435) in Maharashtra, India. The 435 Thinner is a super-fast drying thinner, low VOC solvent for use with the MG Chemical's conformal and EMI/RFI shielding coating products. It is designed to ensure a good adherence to the plastic substrates. We offer it at the leading market rate.

Features :

• Low VOC
• Fast Evaporation Rate
• Enhances Adhesion to Plastic Substrates
• Highly Miscible with Other Common Organic Solvents
• Compatible with most substrates used in electronic parts and enclosures

Application : This fast drying time of the 435 makes is a good choice for spray application of EMI/RFI shielding and conformal coatings that require low VOC and need quick drying times.

Thinning Instructions :

• Make necessary adjustments according to your paint and spray gun equipment usage instructions.
• A1.0 (paint):1.0 (thinner) dilution is a common starting point. If sagging is observed, reduce the thinner ratio.
• Attention - It is preferable to use this thinner system in a temperature controlled environment. Avoid high temperatures or humidity, which can lead to dry spray and blushing respectively.

We are a distinguished Supplier of Thinner (4353) in Maharashtra, India. The 4353 Thinner 3 is a moderate speed drying thinner, for use with the MG Chemical's conformal products. The thinner promotes good flow properties and suppresses blushing. We are renowned for making timely deliveries of our consignments, even if the client places a bulk order.

Features :

• Blush Resistant
• Fast Evaporation Rate
• Excellent Levelling and Gloss
• Highly Miscible with Other Common Organic Solvents
• Compatible with most substrates used in electronic parts and enclosures

Thinning Instructions

• Make necessary adjustments according to your paint and spray gun equipment usage instructions.
• A 1.0 (paint):1.0 (thinner) dilution is a common starting point. If sagging is observed, reduce the thinner ratio.