Post Buy Requirement
PE
Delhi, India
Add Review

Other Products / Services #358442

Vacuum Metalizing Plants,

Vacuum Metalizing Plants, have earned enviable reputation in a short time. These are manufactured with high quality material & precision workmanship, in a well equipped workshop under the direct supervision of experienced and qualified engineers.
View Complete Details

Pump Ring

  • Pump Speed in rpm 1450
  • Free Air Diplacement in m3/hr 81
PROMIVAC has come forth with a Double Stage version of their vastly patronized Water-ring type Vacuum Pump. Each and every pump of this new series very successfully and effectively takes care of its respective job and hence as usual is held in similar high esteem the 'PROMIVAC' logo has already earned.
View Complete Details

Submersible Sewage Pump

  • Application Commercial
  • Motor Phase Single Phase
  • Number Of Stages Single-stage Pump
View Complete Details

Vertical Submersible Pumps

  • Impeller Size in mm 75, 100, 125
  • Motor HP 2800 rpm 0.5, 1.0, 2.0
These Non-clog Type both Seal & Glandless Vertical Pumps fabricated from chemically inert polypropylene help in effective handling of host of chemicals. It will prove a panacea for host of transferring problems of hazardous liquids like HCl, H2HSO4, HNO3, H3PO4, HF, Sea Water, Caustic Slurries & Industrial Waste and hence is a boon for pharmaceutical, chemical processing, electroplating and effluent handling industries.
View Complete Details

Vacuum Pump Oil

  • Approx. Oil Charges in Ltrs. 2, 4, 4.5
  • Ultimate Pressure in mm Hg. " 0.05
These are available in single & double stage and are oil sealed, rotary vane type positive displacement pumps where, not only complete assembly is immersed in oil but shaft seal is also designed in such a way that it totally eliminates the possibility of suction of air through it. These are designed to achieve maximum vacuum in a very short time and rise in temperature of the unit also remains under check, which in turn reduces the wear and tear of its components and makes it suitable for noiseless and trouble free performance for years and thus helps in reduction of repair bills.
View Complete Details

Vacuum Pressure Turbine Blowers

These pumps combine in them double features of suction & pressure and hence the same unit can be employed for either purpose. These have low oil consumption and are compact in design, noiseless & care free in operation and easily maintainable.

The main assembly consists of a stator with a rotor mounted eccentrically in it. The rotor is provided with eight vanes, which are free to slide and move in & out of the slots, by centrifugal action. When in 'out' position these press against the inner walls of stator. When the rotor rotates, these vanes sweep the air eight times in a single revolution creating vacuum & pressure simultaneously.

The design provides for self-lubrication of all the important points and the oil thus used does not contaminate the air, but is baffled from the exhaust, gets collected and returns to the oil chamber.

Each and every unit is fully engineered with all its components immaculately finished and matched. The walls of all components are suitably strengthened so as to render sufficiently long life even while working under adverse conditions. All the components are machined, drilled and finished with jigs and fixtures and are hence easily replaceable. All these distinguished features therefore, add up to make these pumps an indisputable choice of all reputed companies and concerns.

Model No. Reqd hp Free Air Displacement in lpm Ultimate Vacuum in mm Hg Maximum Pressure in PSI
PV-70 1/4 70 700 10
PV-150 1/2 150 700 15
PV-300 1 350 685 20
PV-500 2 600 685 20
PV-1000 3 1000 660 20
PV-1500 5 1500 660 20
PV-2000 5 2000 660 20
View Complete Details

Twin Chambered Impregnation Plants

These double chambered continuous Impregnation plant are specially designed to ensure high quality of Impregnation at a much faster rate than that of the conventional type. Here, both the chambers, in turns can be used as Impregnation as well as storage tanks where by, we not only get increase in capacity, but also save on time as well. Thus in a way this full-fills the duty of a bigger plant. The tanks are fabricated from M.S. plate of appropriate thickness and are fitted with leak proof lids with handles. Two viewing ports are provided on each tank for observing the process under light.

Model No. Chamber Diamensions 
Dia. X Ht. (mm)
Capacity 
Aprx.in ltrs.
Required Rotary High Vacuum Pump
Model FAD lpm hp
PV-IP-1 300 X 400 30 PV-2-200 250 ½
PV-IP-2 350 X 450 50 PV-2-200 250 ½
PV-IP-3 400 X 500 80 PV-2-200 250 ½
PV-IP-4 * 500 X 600 120 PV-2-300 350 ¾
PV-IP-5 * 550 X 650 160 PV-2-300 350 ¾
PV-IP-6 * 600 X 750 200 PV-2-500 500 1
PV-IP-7 * 750 X 1000 440 PV-2-800 800 2
PV-IP-8 * 1000 X 1250 1000 PV-2-1200 1200 3


View Complete Details

High Vacuum Plants

Promivac plants & systems which are known for their compact design, reliability and efficient performance, have earned enviable reputation in a short time. These are manufactured with high quality material & precision workmanship, in a well equipped workshop under the direct supervision of experienced and qualified engineers.Trouble free service for a long time and readily available after sales service have made them all the more popular and hence are being widely accepted in laboratories, industries and research units of repute. We offer High Vacuum Coating units.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Hashim Ali (Promivac Engineers)
  • 3575, P. N. B. Building, N. S. Marg, Darya Ganj, Delhi - 110002
  • Share us via