We are offering linear actuator. + driven by high quality ball screw, good repeatability and long lifetime + new style shaft tip structure to prevent screw from loosing, very suitable for high speed reciprocating motion + adopt high precision linear slider guide, smooth motion anmore...
TTRA SERIES Properly applied to rotary table / position device , ATC , tooling machine and each automatic mechanism connected with servo motor directly. The features of TTRA series are direct output, tightening engagement, and high accuracy. TTRD-C SERIES For meeting every demmore...
The "Emtork" Electric Actuators are electromechanical units used for operating the final control elements like valves or dampers to control the flow of fluids flowing thru the pipes or ducts. The specific advantages of using these units are : 1)Ease of operation. 2)Remote controlmore...
Use : Used for a wide variety of applications, and are particularly well suited for operating tOS process valves, such as butterfly valves, ball valves or cylindrical plug valves.
Temperature range : -20°C / -4°F to 80°C / 176°F.
Material Available : Aluminum, Stainless steel
Available air pressure torque : 20Nm to 10'025Nm (at 6 bar / 87psi for double-acting actuators)
Actuator Life : 10,000 cycle consists of normal 900 travel in both directions (ie.900 to open +900 to close). an average load of at least 30% of the rated torque. One start consist of a movement of at least 1% travel in both direction (as per EN standard.15714-2-2009)
Torque limit switches : Maximum two numbers of micro limit switches for end positions can be provide
Type 1 NO + 1NC change over type, Contact rating: 10A, 125-250 V AC
Supply Voltage : Single phase 230 V +/-10%, 50 Hz +/-5%
Feed back Potentiometer : A multi turn pot meter is used for 0-500 ohms out put feedback value
Local position Indicator : A continuous local mechanical position indicator is provided with actuator which always gives a faithful indication of actuator position independent of power supply.
Adjustable mechanical : Two adjustable mechanical stoppers are provided with actuator in open & close stoppers direction. This feature gives backup safety to ï¬nal control device.
Actuator Life : 10,000 cycle consists of normal 900 travel in both directions (ie.900 to open +900 to close). an average load of at least 30% of the rated torque. One start consist of a movement of at least 1% travel in both direction (as per EN standard.15714-2-2009)
Auxiliary limit switches : Maximum four numbers of micro limit switches for end position can be provided.
Type 1 NO + 1 NC change over contact,
Contact rating: 10A 125 - 250 V AC.
Duty : S2-10 min, S4-30% - 1200 cycles/hour
Adjustable mechanical : Two adjustable mechanical stoppers are provided with actuator in open & close stoppers direction. This feature gives backup safety to ï¬nal control device.
Space heater : To prevent water condensation, the actuator are ï¬tted with an anti condensation heater called as space heater, the latter can be connected to the AC or DC voltage of 230 V.
Supply Voltage : Single phase 230 V +/-10%, 50 Hz +/-5%,
Three phase 415 V +/-10%, 50 Hz +/-5%, also available in 24 V AC / 110 V AC Supply
Three Phase Electrical Actuators We have various Types of electrical Actuators from MOTOCON INDUSTRIES have been developed specially for the quarter turn operation of small size Butterfly Valves, Ball Valves, Plug Valves and Dampers. We are provided with Three phase Actuator whimore...
Servo Linear Actuator is designed to be used as mechanical system to induce or control motion. Based on advanced technology, Servo Linear Actuator transforms an input signal (usually electrical) into motion. The Servo Linear Actuator ensures precise control in microns over the momore...
Kit for manually-actuated shutter system, contains shutter bladearmshaft, feedthrough and couplers (SPECIFY DESIRED BLADE, ARM AND SHAFT DIMENSIONS AT CHECKOUT)more...
The brake actuator converts pneumatic energy into mechanical energy. This results in the friction material being pressed against the brake contact surfaces, thus causing the vehicle to slow down or stop. Brake actuator For buses, heavy goods vehicles and trailers, Knorr-Bremse, wmore...
Clutch actuation units and gear control units ensure comfortable and safe control of today's commercial vehicle gearboxes. The electro-pneumatic clutch actuator enables electronic control of a commercial vehicle clutch. The control is carried out by solenoid valves for supplying more...
Features Travel Stops : Two external travel stops permit adjustments of +/-5 degree. Note : Travel stops are located on end caps on size 045 only. Bearings : Top quality bearings and seals for low friction and high cycle life to ensure trouble free operation. Same bearings are usmore...
Range Available : Advanced performance 4 to 20 mA with HART communication Standard performance 4 to 20 mA with HART communication Standard performance with Profibus PA communication Standard performance with Foundation Fieldbus communication Standard performance, flameproof enclomore...
Under/over/Zero speed protection Enclosure Cast Al/Cast Iron/Flame proof/FRP/ABS enclosure Grade of protection IP65 for monitoring unit/IP 67 for sensor probe Multi Range model for reducing inventory Range - 5 - 5000 RPM Field Selectable Built in Initial start up/Nuisance time demore...
We are a prominent manufacturer and supplier of Valve Positioners (VP-902) from Maharashtra, India. We offer precision-made valve positioners, which are used in regulating the mechanical position of the final control aspect of incoming commands from controllers in a distributed cmore...
4 – 20 mA from Control Signal ï· Type : Field / Inside Valve Mounted ï· Feedback: 100 to 235 Ω from Helipot ï· Output: 230V AC Up/Dn Relay to run Motor or reverse direction •Controlling Mechanical Position of final control element with respect to incominmore...
Pneumatic positioner is an useful interlinking device controlling cylinder valve movement in proportion to pneumatic signal ranging between 0.2 to 1 bar (3 to 15 psi) or split ranges. The salient features of Schrader Pneumatic Positioner are:more...
Valve automation is need of the process industry and Rotary Actuator is key element of valve automation. Schrader Duncan Limited launches �MaxFlow� range of Pneumatic Rotary Actuators. These actuators are available in spring return Single Acting as well as Double Acting modelmore...
Valve automation is need of the process industry and Rotary Actuator is key element of valve automation. Schrader Duncan Limited launches �MaxFlow� range of Pneumatic Rotary Actuators. These actuators are available in spring return Single Acting as well as Double Acting modelmore...