Features : Switches available in Cast Iron & Die Cast Aluminum enclosures in sophisticated as well as economic versions. Switches are also available in Industrial Polymer Enclosure to withstand Chemical / Fertilizer / Saline (Seashore) environment Etc.
Features : Retaining type screws, Models available with Junction box/Indicating Lamp, Contact combination 1N0+1NC/ 2N0+2NC,Robust spring to absorb impact from belt.
• Din Rail mounted signal converter / isolator is available in different input. • 0-5mVDC / 0-20mVDC / 0-50mVDC / 0-100mVDC / 0 10mADC / 0-20mADC / 4-20mADC / 0-5 VDC / 1-5 VDC / 0-10VDC / 0-5Amp / 0-1 Amp or customer specified, up to 3 outputs are available with all pomore...
Enclosure : Cast Aluminum : Degree of Protection : IP65
Contact Arrangement : 2 No + 2NC : Contact Rating : 10 Amp. Res. @ 110/240 V AC 50Hz
Actuation : By splinters of the torn belt. : Reset : Manual
The monitoring units are to be fixed in inclined position in the direction of the belt rnovement. The unit is provided with two 5meter long rope lengths. Appropriate length to be cut while fixing the rope. The splinters, resulting from tearing of the belt, will push out the cromore...
Contact : 1c/o/2c/o : Output Indications : Through LEDs
Max Range : Adjustable up to 3 mtrs : Operating Temp. : up to 55 Degrees
Restart : Automatic / Manual : By Pass : Provided for bypass
Power Supply : 110/ 230 Volt : Enclosure : Cast Aluminum
Sai Control System offers new generation Belt Rupture/Rip switch which is based on advanced micro controller technology. Belt rupture Switch consist of controller and optical transmitter and receiver for sensing. Sensor to be mounted below the belt of the conveyor. If the belt ismore...
We offers signal isolators to isolate and convert field signals like resistance, current, voltage, frequency to 4-20 ma. These isolators find use in process control industries for signal isolation. Variety of models is available for specific applications. transmitters are the fiemore...
We are offering signal converters, isolators and transmitters to isolate and convert field signals like resistance, current, voltage, frequency to 4-20 ma. These isolators find use in process control industries for signal isolation. Variety of models is available for specific appmore...
Protocontrol offers signal multipliers to isolate field signals like 4-20 ma and multiply them to up to four for processing them at four different locations. Hence one 4-20 ma input can be used for location indication, remote monitoring as well as data acquisition. These multiplimore...
\r\n System Voltage\r\n : \r\n 3.3 KV....66KV, 6.6KV.... 66KV\r\n
\r\n Rated KVAR\r\n : \r\n 50 KVAR....20 MVar with series Reactor\r\n
Outdoor HT harmonic filter capacitor bank systems using FRAKO / CPSL make capacitors & reactors. High voltage power capacitor units include a wide range of one and three-phase all film power and surge protection capacitors. Featuring the most modern technology, they are produced more...
ESD's signal isolators are suitable for connecting field signal from sensors to PLC's with isolated ground loop. These isolators prevent noise and RFI EMI interference being transmitted to the instruments.more...
DIMENSIONS MOUNTING
:
Wall Mounted type
DIN rail Mounting.
ISOLATION
ACCURACY
LINEARITY
OUTPUT
:
0.25% of F. S.
0.25% of F. S.
28 mA max.
TEMPERATURE DRIFT
:
200 ppm
INPUT
:
Less than 100 V for 4 to 20mA
OUTPUT LOAD
:
500 V Max. for 4 to 20 mA
WEIGHT
MODEL
:
1.5Kgapprox.
405 - Dual output with DIN rail housing 406 - Dual output wall mounted type with 24 v DC output 407 - Five output with DIN rail housing.
Features: : Precisely engineered , Smooth functioning and Noiseless operation
we have been able to provide our clients premium quality Load Break Switch.The given range of break switch is manufactured with supreme quality material by vendor’s experts. Our break switch is stringently tested on numerous quality parameters for ensuring its quality.This breamore...
ESD's signal isolators are suitable for connecting field signal from sensors to PLC's with isolated ground loop. These isolators prevent noise and RFI EMI interference being transmitted to the instruments.more...
Isolators & Signal Conditioners Single Input Dual Output(DIN 1X2) Signal Isolation Transmitter LOW COST INTERNALLY POWERED ISO-UPO: DC Voltage Signal (VI, VV) Isolated Amplifier IC DIN 1X1 VF Transmittermore...
With the help of our modern transit facility, we are capable of delivering the orders at the desired place with ease. Founded in Jamshedpur(India), the company has garnered wide appreciation for its seamless quality products and client centric approach.more...
Polymer Surge Arresters are Light Weighted, Hydrophobic in nature and finds application in both indoor and outdoor systems for the protection of Electrical Equipments. Conforms to IEC 60099-4 High Energy Handling Capability Hydrophobic silicone polymer Excellent Cantilever and Temore...
We supply, shock-proof Air Break Switch, which is very powerful and it can resist high-voltage, ranging from 10-12kV. We have hired a team of professional quality experts to carry out diverse quality tests in order to ensure zero defects at buyer's end. Courtesy a wide distributimore...
Nikhtish animal isolators are specially designed to protect laboratory personnel, the environment & the laboratory animal or any combination of the three, from contaminants & allergens. more...
These Switches are designed for Man and Machine Safety, to avoid accidents, and for stopping the Machine in case of Emergency. In Belt Conveyors, belt swaying occurs due to uneven loading, misalignment of the idlers & due to worn surfaces. Belt Sway Switches are useful to restricmore...
Load Break (Isolator) range from 16 - 125 Ampere Upto 8 pole can be offered Multiple mounting options ABS / Aluminum / sheet steel enclosures Add on pole - Power / Neutral and Auxiliary pole can be offered Changeover switches upto 4 pole from 25 to 125 Amps more...