Our Products
We offer a complete product range of Stainless Steel Reinforcement Bar
Aj = 100 mm marked before tension measured after tension to fracture measuring point 2.5 x diameter from fracture.
A10 = Diameter x 10 marked before tension measured after tension to frature measured across fracture.
Approval:We can also supply Stainless Steel rebars/coils as per ASTM A 955 / 1259 & EN standards.
We are applying for German approved for Stainless steel rebars / Coils as per DIN 488 standard.
The grade of reinforcement steel will depend upon type of corrosive atmosphere
| For moderate atmosphere high yield reinforcement steel like 1.4301 (304) can be used. |
| For more severe corrosive atmospheres 1.4401 (316), 1.4429 (316LN), 1.4436 (316) & 1.457 ( 316Ti) can be used. |
| For high aggressive atmospheres duplex steel 1.4362, 1.4462 (2205) is recommended. |
|
GRADE |
Size In MM | Tensile Strength N/MM | Yield Strength N/MM |
% Elongation A5 |
T.S./ 0.2 % Yield |
| 1.4301 – 304 | 3 – 16 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4401 – 316 | 3 – 16 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4429 – 316LN | 3 – 16 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4436 – 316 | 3 – 16 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4571 – 316Ti | 3 – 16 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4362 [Duplex] | 3 – 16 | ≥800 | ≥600 | 14 | 1.10 |
| 1.4462 [Duplex] | 3 – 16 | ≥800 | ≥600 | 14 | 1.10 |
| 1.4301 – 304 | 16 -25 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4401 – 316 | 16 -25 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4571 – 316Ti | 16 -25 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4462 [Duplex] | 16 -25 | ≥700 | ≥500 | 14 | 1.10 |
| 1.4301 – 304 | 16 -50 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4401 – 316 | 16 -50 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4429 – 316LN | 16 -50 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4436-316 | 16 -50 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4571 – 316Ti | 16 -50 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4362 [Duplex] | 16 -50 | ≥600 | ≥500 | 14 | 1.10 |
| 1.4462 [Duplex] | 16 -50 | ≥600 | ≥500 | 14 |