Our Products
"RAJESH" offers an efficient & ideal new design unit for high temp. And low fuel cost for melting C.I. Alloy. Ferrous & Non. Ferrous metals. Simplicity of operation & high thermal efficiency.The shell is fabricated robustly from M.S. Plates and remaining other parts from heavy gauge sheets. The center portion is cylindrical & the ends are conical. Two M.S. Tyres are provided on the shell rotation. The base frame structure is robustly fabricated for continuous heavy &hard use. The drive support and guide rollers are of cast iron. The roller shafts are mounted on heavy duty bearings coupled pedestals.
The Burning system consists of a high capacity & efficient Burner. An efficient new designs steel tube Recuperate and burner is used to preheat the air more. Result in fuel saving & also ensures quicker melts.
Rapid Meting, Intimate Mixing, Flexibility of production, Lower Melting Cost.
REFRACTORY, ELECTRIC & PIPE FITTING ARE NOT SUPPLY WITH FURNACE. ON COMPLETION OF ERECTION GIVING A COMPLETE SATISFACTORY TRIAL.
The Furnace is supplyed complete with following units.
Rail
Melting Capacity(apprx.) | Melting Time Minutes(apprx.) | Heating Time Minutes | H.P. of Ele. Motor Shell | H.P Blower H.P. | Ground Area required L×W |
---|---|---|---|---|---|
25KG | 12 | 10 | 0.5 | 2.0 | 15' × 12' |
50KG | 16 | 10 | 0.5 | 3.0 | 15' × 12' |
100KG | 20 | 10 | 1.0 | 5.0 | 18'× 12' |
150KG | 25 | 15 | 1.0 | 5.0 | 18' × 12' |
250KG | 35 | 15 | 1.0 | 7.5 | 22' × 15' |
400KG | 45 | 15 | 2.0 | 7.5 | 22' × 15' |
500KG | 55 | 15 | 2.0 | 10.0 | 25' × 15' |
750KG | 70 | 15 | 2.0 | 12.5 | 25' × 18' |
1000KG | 90 | 20 | 3.0 | 15.0 | 30' × 20' |
2000KG | 120 | 25 | 5.0 | 20.0 | 36'× 25' |
"RAJESH"Offer ruggedly constructed, the oil fired crucible furnace withstand both thermal stresses and sever working conditions.
The steel furnace casing is lined with high Grade. Alumina refractories and backed with insulation. The furnace is supplied with L.A.P. Oil Fired Burner and designed for firing of any grade of Oil. A separate Motoreised blower delivers the air required for combustion.
For General foundry use, it is the smoothest working and simplest Oil Fired furnace for melting AI, Brass, Gun Metal, Copper, Non-Ferrous Alloys and Cast-iron. Refractory, Electrical & Pipe fitting are not supply with the furnace. It is inexpensive, easy to installed and costs little to maintain.
THE FURNACE SUPPLY WITH.
Shell * Stand along with Bearing Coupled pedestals * Reduction gear assembly * Motorised Blower * Burner* Oil Tank * Ladles.
TYPE : MELTING * HOLDONG * TILTING * SALT BATH
"RAJESH"Offer ruggedly constructed, the oil fired crucible furnace withstand both thermal stresses and sever working conditions.
The steel furnace casing is lined with high Grade. Alumina refractories and backed with insulation. The furnace is supplied with L.A.P. Oil Fired Burner and designed for firing of any grade of Oil. A separate Motoreised blower delivers the air required for combustion.
For General foundry use, it is the smoothest working and simplest Oil Fired furnace for melting AI, Brass, Gun Metal, Copper, Non-Ferrous Alloys and Cast-iron. Refractory, Electrical & Pipe fitting are not supply with the furnace. It is inexpensive, easy to installed and costs little to maintain.
THE FURNACE SUPPLY WITH.
Shell * Stand along with Bearing Coupled pedestals * Reduction gear assembly * Motorised Blower * Burner* Oil Tank * Ladles.
TYPE : MELTING * HOLDONG * TILTING * SALT BATH