Our Products
Our hydraulic deep draw press are highly rigid, compact, space saving four-pillar type in design. Hydraulic deep drawing press are equipped with PLC, L.V.D.T depth control, photo sensor electronic safety guard, auto ejector. They are specially designed for uniform pressure on blank holder to avoid wrinkles during the process which improves the quality and productivity rate of products. Hydraulic deep draw press is suitable for manufacturing stainless steel utensils and other automobile draw components with high degree of finish, productivity and speed.
Note
Technical Specification
Model No | Cap. Ton | Main Cyl. Cap. (mm) | Blank Holder Cap (mm) | Bolster Size (mm) | Day-Light Gap | Blank Holder Stroke | Maincyl Stroke | Motor HP | Ejector Cyl. Cap. (Tons) |
---|---|---|---|---|---|---|---|---|---|
RDD 100 | 100 | 50 | 50 | 700 X 700 | 500 | 300 | 500 | 7.5 X 1 | 10 |
RDD | 150 | 75 | 75 | 900 X 700 | 600 | 300 | 500 | 7.5 X 1 | 10 |
150 | |||||||||
RDD | 200 | 100 | 100 | 900 X 900 | 600 | 300 | 600 | 10 X 1 | 15 |
250 | |||||||||
RDD | 300 | 150 | 150 | 1200 X 1000 | 750 | 400 | 700 | 20 X 1 | 20 |
400 | |||||||||
RDD | 400 | 200 | 200 | 1200 X 1200 | 800 | 450 | 750 | 20 X 1 | 20 |
500 | |||||||||
RDD | 500 | 250 | 250 | 1500 X 1200 | 800 | 450 | 750 | 25 X 1 | 20 |
500 | |||||||||
RDD | 600 | 300 | 300 | 1500 X 1800 | 900 | 450 | 850 | 30 X 2 | 25 |
600 | |||||||||
RDD | 800 | 400 | 400 | 1800 X 1500 | 1000 | 500 | 900 | 40 X 2 | 25 |
800 | |||||||||
RDD | 1000 | 500 | 500 | 2000 X 1800 | 1200 | 600 | 1100 | 50 X 2 | 25 |
1000 |
Our hydraulic deep draw press are highly rigid, compact, space saving four-pillar type in design. Hydraulic deep drawing press are equipped with PLC, L.V.D.T depth control, photo sensor electronic safety guard, auto ejector. They are specially designed for uniform pressure on blank holder to avoid wrinkles during the process which improves the quality and productivity rate of products. Hydraulic deep draw press is suitable for manufacturing stainless steel utensils and other automobile draw components with high degree of finish, productivity and speed.
Note
Technical Specification
Model No | Cap. Ton | Main Cyl. Cap. (mm) | Blank Holder Cap (mm) | Bolster Size (mm) | Day-Light Gap | Blank Holder Stroke | Maincyl Stroke | Motor HP | Ejector Cyl. Cap. (Tons) |
---|---|---|---|---|---|---|---|---|---|
RDD 100 | 100 | 50 | 50 | 700 X 700 | 500 | 300 | 500 | 7.5 X 1 | 10 |
RDD | 150 | 75 | 75 | 900 X 700 | 600 | 300 | 500 | 7.5 X 1 | 10 |
150 | |||||||||
RDD | 200 | 100 | 100 | 900 X 900 | 600 | 300 | 600 | 10 X 1 | 15 |
250 | |||||||||
RDD | 300 | 150 | 150 | 1200 X 1000 | 750 | 400 | 700 | 20 X 1 | 20 |
400 | |||||||||
RDD | 400 | 200 | 200 | 1200 X 1200 | 800 | 450 | 750 | 20 X 1 | 20 |
500 | |||||||||
RDD | 500 | 250 | 250 | 1500 X 1200 | 800 | 450 | 750 | 25 X 1 | 20 |
500 | |||||||||
RDD | 600 | 300 | 300 | 1500 X 1800 | 900 | 450 | 850 | 30 X 2 | 25 |
600 | |||||||||
RDD | 800 | 400 | 400 | 1800 X 1500 | 1000 | 500 | 900 | 40 X 2 | 25 |
800 | |||||||||
RDD | 1000 | 500 | 500 | 2000 X 1800 | 1200 | 600 | 1100 | 50 X 2 | 25 |
1000 |
Our hydraulic deep draw press are highly rigid, compact, space saving four-pillar type in design. Hydraulic deep drawing press are equipped with PLC, L.V.D.T depth control, photo sensor electronic safety guard, auto ejector. They are specially designed for uniform pressure on blank holder to avoid wrinkles during the process which improves the quality and productivity rate of products. Hydraulic deep draw press is suitable for manufacturing stainless steel utensils and other automobile draw components with high degree of finish, productivity and speed.
Note
Technical Specification
Model No | Cap. Ton | Main Cyl. Cap. (mm) | Blank Holder Cap (mm) | Bolster Size (mm) | Day-Light Gap | Blank Holder Stroke | Maincyl Stroke | Motor HP | Ejector Cyl. Cap. (Tons) |
---|---|---|---|---|---|---|---|---|---|
RDD 100 | 100 | 50 | 50 | 700 X 700 | 500 | 300 | 500 | 7.5 X 1 | 10 |
RDD | 150 | 75 | 75 | 900 X 700 | 600 | 300 | 500 | 7.5 X 1 | 10 |
150 | |||||||||
RDD | 200 | 100 | 100 | 900 X 900 | 600 | 300 | 600 | 10 X 1 | 15 |
250 | |||||||||
RDD | 300 | 150 | 150 | 1200 X 1000 | 750 | 400 | 700 | 20 X 1 | 20 |
400 | |||||||||
RDD | 400 | 200 | 200 | 1200 X 1200 | 800 | 450 | 750 | 20 X 1 | 20 |
500 | |||||||||
RDD | 500 | 250 | 250 | 1500 X 1200 | 800 | 450 | 750 | 25 X 1 | 20 |
500 | |||||||||
RDD | 600 | 300 | 300 | 1500 X 1800 | 900 | 450 | 850 | 30 X 2 | 25 |
600 | |||||||||
RDD | 800 | 400 | 400 | 1800 X 1500 | 1000 | 500 | 900 | 40 X 2 | 25 |
800 | |||||||||
RDD | 1000 | 500 | 500 | 2000 X 1800 | 1200 | 600 | 1100 | 50 X 2 | 25 |
1000 |
Our hydraulic deep draw press are highly rigid, compact, space saving four-pillar type in design. Hydraulic deep drawing press are equipped with PLC, L.V.D.T depth control, photo sensor electronic safety guard, auto ejector. They are specially designed for uniform pressure on blank holder to avoid wrinkles during the process which improves the quality and productivity rate of products. Hydraulic deep draw press is suitable for manufacturing stainless steel utensils and other automobile draw components with high degree of finish, productivity and speed.
Note
Technical Specification
Model No | Cap. Ton | Main Cyl. Cap. (mm) | Blank Holder Cap (mm) | Bolster Size (mm) | Day-Light Gap | Blank Holder Stroke | Maincyl Stroke | Motor HP | Ejector Cyl. Cap. (Tons) |
---|---|---|---|---|---|---|---|---|---|
RDD 100 | 100 | 50 | 50 | 700 X 700 | 500 | 300 | 500 | 7.5 X 1 | 10 |
RDD | 150 | 75 | 75 | 900 X 700 | 600 | 300 | 500 | 7.5 X 1 | 10 |
150 | |||||||||
RDD | 200 | 100 | 100 | 900 X 900 | 600 | 300 | 600 | 10 X 1 | 15 |
250 | |||||||||
RDD | 300 | 150 | 150 | 1200 X 1000 | 750 | 400 | 700 | 20 X 1 | 20 |
400 | |||||||||
RDD | 400 | 200 | 200 | 1200 X 1200 | 800 | 450 | 750 | 20 X 1 | 20 |
500 | |||||||||
RDD | 500 | 250 | 250 | 1500 X 1200 | 800 | 450 | 750 | 25 X 1 | 20 |
500 | |||||||||
RDD | 600 | 300 | 300 | 1500 X 1800 | 900 | 450 | 850 | 30 X 2 | 25 |
600 | |||||||||
RDD | 800 | 400 | 400 | 1800 X 1500 | 1000 | 500 | 900 | 40 X 2 | 25 |
800 | |||||||||
RDD | 1000 | 500 | 500 | 2000 X 1800 | 1200 | 600 | 1100 | 50 X 2 | 25 |
1000 |
We offer heavy duty frame type deep draw press, hydraulic deep drawing presses, which are widely used in different industries to manufacture deep drawing components. These are heavy duty, high performance, pillar type hydraulic press for manufacturing deep drawing press components. Impeccably equipped with most advanced hydraulic & electronic (PLC) control. They are designed for high off center loads with heavy RAM force. Accurate slide guiding with full stroke length is helpful to provide the better accuracy & effective performance of the presses. Deep draw press is perfect for deep drawing automobile sheet metal components, oil tanks, stainless steel kitchen sinks, mudguards etc.
Note
Technical Specification
Model No | Cap. (Ton) | Platen Size (mm) | Day Light Gap (mm) | Main Cyl. Stroke (mm) | Die Cushion Cap. (Ton) | Die Cushion Cyl. Stroke (mm) | Die Cushion Table(mm) | Motor (H.P.) |
---|---|---|---|---|---|---|---|---|
RDDP-100 | 100 | 600x600 | 500 | 400 | 40 | 200 | 300x300 | 10 |
RDDP-150 | 150 | 900x700 | 600 | 400 | 60 | 250 | 600x400 | 20 |
RDDP-250 | 200 | 1000x800 | 700 | 450 | 80 | 300 | 700x400 | 20 |
RDDP-400 | 300 | 1200x1000 | 800 | 500 | 150 | 300 | 800x600 | 25 |
RDDP-500 | 400 | 1200x1200 | 800 | 500 | 200 | 350 | 900x600 | 30 |
RDDP-600 | 500 | 1400x1200 | 900 | 650 | 200 | 400 | 900x600 | 30x2 |
RDDP-800 | 600 | 1500x1500 | 1000 | 600 | 250 | 400 | 1000x800 | 30x2 |
RDDP-1000 | 800 | 1800x1500 | 1200 | 750 | 300 | 450 | 1200x1000 | 40x2 |
RDDP-1200 | 1000 | 1800x1800 | 1200 | 750 | 350 | 500 | 1500x1200 | 50x2 |
We offer heavy duty frame type deep draw press, hydraulic deep drawing presses, which are widely used in different industries to manufacture deep drawing components. These are heavy duty, high performance, pillar type hydraulic press for manufacturing deep drawing press components. Impeccably equipped with most advanced hydraulic & electronic (PLC) control. They are designed for high off center loads with heavy RAM force. Accurate slide guiding with full stroke length is helpful to provide the better accuracy & effective performance of the presses. Deep draw press is perfect for deep drawing automobile sheet metal components, oil tanks, stainless steel kitchen sinks, mudguards etc.
Note
Technical Specification
Model No | Cap. (Ton) | Platen Size (mm) | Day Light Gap (mm) | Main Cyl. Stroke (mm) | Die Cushion Cap. (Ton) | Die Cushion Cyl. Stroke (mm) | Die Cushion Table(mm) | Motor (H.P.) |
---|---|---|---|---|---|---|---|---|
RDDP-100 | 100 | 600x600 | 500 | 400 | 40 | 200 | 300x300 | 10 |
RDDP-150 | 150 | 900x700 | 600 | 400 | 60 | 250 | 600x400 | 20 |
RDDP-250 | 200 | 1000x800 | 700 | 450 | 80 | 300 | 700x400 | 20 |
RDDP-400 | 300 | 1200x1000 | 800 | 500 | 150 | 300 | 800x600 | 25 |
RDDP-500 | 400 | 1200x1200 | 800 | 500 | 200 | 350 | 900x600 | 30 |
RDDP-600 | 500 | 1400x1200 | 900 | 650 | 200 | 400 | 900x600 | 30x2 |
RDDP-800 | 600 | 1500x1500 | 1000 | 600 | 250 | 400 | 1000x800 | 30x2 |
RDDP-1000 | 800 | 1800x1500 | 1200 | 750 | 300 | 450 | 1200x1000 | 40x2 |
RDDP-1200 | 1000 | 1800x1800 | 1200 | 750 | 350 | 500 | 1500x1200 | 50x2 |
We offer heavy duty frame type deep draw press, hydraulic deep drawing presses, which are widely used in different industries to manufacture deep drawing components. These are heavy duty, high performance, pillar type hydraulic press for manufacturing deep drawing press components. Impeccably equipped with most advanced hydraulic & electronic (PLC) control. They are designed for high off center loads with heavy RAM force. Accurate slide guiding with full stroke length is helpful to provide the better accuracy & effective performance of the presses. Deep draw press is perfect for deep drawing automobile sheet metal components, oil tanks, stainless steel kitchen sinks, mudguards etc.
Note
Technical Specification
Model No | Cap. (Ton) | Platen Size (mm) | Day Light Gap (mm) | Main Cyl. Stroke (mm) | Die Cushion Cap. (Ton) | Die Cushion Cyl. Stroke (mm) | Die Cushion Table(mm) | Motor (H.P.) |
---|---|---|---|---|---|---|---|---|
RDDP-100 | 100 | 600x600 | 500 | 400 | 40 | 200 | 300x300 | 10 |
RDDP-150 | 150 | 900x700 | 600 | 400 | 60 | 250 | 600x400 | 20 |
RDDP-250 | 200 | 1000x800 | 700 | 450 | 80 | 300 | 700x400 | 20 |
RDDP-400 | 300 | 1200x1000 | 800 | 500 | 150 | 300 | 800x600 | 25 |
RDDP-500 | 400 | 1200x1200 | 800 | 500 | 200 | 350 | 900x600 | 30 |
RDDP-600 | 500 | 1400x1200 | 900 | 650 | 200 | 400 | 900x600 | 30x2 |
RDDP-800 | 600 | 1500x1500 | 1000 | 600 | 250 | 400 | 1000x800 | 30x2 |
RDDP-1000 | 800 | 1800x1500 | 1200 | 750 | 300 | 450 | 1200x1000 | 40x2 |
RDDP-1200 | 1000 | 1800x1800 | 1200 | 750 | 350 | 500 | 1500x1200 | 50x2 |
We offer heavy duty frame type deep draw press, hydraulic deep drawing presses, which are widely used in different industries to manufacture deep drawing components. These are heavy duty, high performance, pillar type hydraulic press for manufacturing deep drawing press components. Impeccably equipped with most advanced hydraulic & electronic (PLC) control. They are designed for high off center loads with heavy RAM force. Accurate slide guiding with full stroke length is helpful to provide the better accuracy & effective performance of the presses. Deep draw press is perfect for deep drawing automobile sheet metal components, oil tanks, stainless steel kitchen sinks, mudguards etc.
Note
Technical Specification
Model No | Cap. (Ton) | Platen Size (mm) | Day Light Gap (mm) | Main Cyl. Stroke (mm) | Die Cushion Cap. (Ton) | Die Cushion Cyl. Stroke (mm) | Die Cushion Table(mm) | Motor (H.P.) |
---|---|---|---|---|---|---|---|---|
RDDP-100 | 100 | 600x600 | 500 | 400 | 40 | 200 | 300x300 | 10 |
RDDP-150 | 150 | 900x700 | 600 | 400 | 60 | 250 | 600x400 | 20 |
RDDP-250 | 200 | 1000x800 | 700 | 450 | 80 | 300 | 700x400 | 20 |
RDDP-400 | 300 | 1200x1000 | 800 | 500 | 150 | 300 | 800x600 | 25 |
RDDP-500 | 400 | 1200x1200 | 800 | 500 | 200 | 350 | 900x600 | 30 |
RDDP-600 | 500 | 1400x1200 | 900 | 650 | 200 | 400 | 900x600 | 30x2 |
RDDP-800 | 600 | 1500x1500 | 1000 | 600 | 250 | 400 | 1000x800 | 30x2 |
RDDP-1000 | 800 | 1800x1500 | 1200 | 750 | 300 | 450 | 1200x1000 | 40x2 |
RDDP-1200 | 1000 | 1800x1800 | 1200 | 750 | 350 | 500 | 1500x1200 | 50x2 |