Other Products / Services #1314873

Balancing:

• According to ISO definition, balancing is procedure by which the mass distribution of a rotor is checked and if necessary, adjusted in order to ensure that the vibration of the journals and/or force on the bearings at a frequency corresponding to the service speed is within specified limits.

Effects of unbalance:

• Unbalance in a rotor not only leads to forces on its bearings, journals and foundations but also to machine vibrations.
• At any rotational speed both effects are mainly dependent on mass distribution in rotor and machine, as well as on bearing and foundation stiffness.
• Vibrations, if of sufficient intensity, influence the function and the life of the machine or adjacent equipment.

Features:

• Fully Indigenous Design.
• Safety and Ease of Handling.
• Drive methods which meet your requirements.
• The appropriate electronic unit for your Balancing problems.
• Suitable type of Readout system for every accuracy requirement.

Description:

• Dynamic Balancing Machines are designed and developed after years of experience in this field. All models are manufactured under strict quality control at all manufacturing stages
• All these models are suitable for Balancing variety of components as well as for reduction balancing.
• All types of components, i.e. Armatures, Crankshafts, Fans, Flywheels and all such rotating components can be balanced on these machines with properly designed balancing Fixtures.
• These machines can be equipped with variety of measuring systems suitable for the application and depending on sophistication level required.

With the constant support of experienced professionals, we are offering optimum quality Hard Bearing Dynamic Balancing Machine. This has horizontal type universal hard bearing machines, and fully automatic working cycle.

Our balancing machines are widely used due to following reasons:

• Horizontal type universal hard bearing machines
• End driven
• Fully automatic working cycle
• Microprocessor based measuring panel for simultaneous Unbalance indication in two planes on digital meters
• Key-board facility for rotor data feeding, RPM indication, Auto range, Data store, Self check facility
• Various models - Suitable for rotors from 0.5 to 20, 000 kg
• Minimum achievable unbalance up to 0.5 micron shift in c.g

Owing to the knowledge of this domain, we are offering to our patrons a broad spectrum of Hard Bearing Vertical Balancing Machine.

Description:

• We offer permanently calibrated hard bearing vertical balancing machines that are ideal for balancing the components which do not have heir own journals.
• Few of such components are Turbine Discs, Impellers, Grinding wheels, pulleys etc.
• Our range precision engineered machines offers convenient and safe for the operators.
• Electronic Measuring System: The electronic circuitry used is built in with Plug in type cards. All components used are industry standards and carefully selected for long life and trouble free operation. All measuring systems have built in electronic compensation for compensating the shift of component journal axis from the spindle axis. Our range is available with various measuring systems to suit various components such as direct indication of unbalance mass and angle in digital form. Unbalance resolved in components at 120, 90, 60 etc.

We hold expertise in offering the wide gamut of Torsion Testing Machine in the industry. Our torsion testing machines are designed and developed for conducting torsion and twist on various metal wires, tubes and sheet materials. The torque is measured by the pendulum dynamometer system. The torque can be adjusted by adding weight to the machine. Torque can also be applied to specimen by geared motor through gear box. Auto graphic recorder gives the relation between torque and Angle of twist.

FeaturesTorsion Testing Machine is designed for conducting Torsion and Twist on various metal wires, tubes, sheet materials, torque measurement is by pendulum dynamometer system.Torque ranges can be adjusted by Auto Torque Selector.Torque can be applied to specimen by geared motor through gear box.Autographic recorder gives the relation between torque and angle of twist.The accuracy of torque indication is +1% of the true torque.

We are the leading name in the market engaged in offering a wide assortment of Analog Cum Computerized Universal Testing Machine.
Specializations:

• Computer controlled electromechanical drive
• Wide range of Tensile Speeds
• Personal Computer for enhanced performance and flexibility
• User defined programs and high level data processing programs
• Graphic Display, printer/plotter for high accuracy and rapid response
• Variety of Tests -Tensile, Compression, Bending, Shearing, Cohesion/ Ex foliation, Relaxation, Low cycle fatigue, Stress/Strain controlled tests etc.
• Loading accuracy well within + 1%

Features :

• Loading accuracy as high as ± 1%.
• Suitable at variable speeds to suit a wide range of materials.
• Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials.
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
• High reading accuracy due to large size and design of dial.
• Wide range of standard and special accessories, including Servo control mode, Hydraulic grip front loading, Touch screen control panel & load stabilizer.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for ease of operation.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured by means of safety devices.
• Fully enclosed and protected pendulum.
• Directional control valve provided to change the testing for analogue to digital mode.
• RS 232 serial port to transfer data to computer for analysis/storage evaluation etc
• Printer & PC graphs enable study the behavior of the material.
• Simplicity in reading because of digital readouts.
• Load Capacity : 100 kN, 200 kN, 400 kN, 600 kN, 1000 kN.

Features

• Open type cross head
• Hydraulic wedge action grips
• Long test stroke and dual test space
• Loading accuracy as high as ± 1%
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable study the behavior of the material.
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
• Simplicity in reading because of digital readouts.
• Wide range of standard and special accessories, including load stabilizer.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for ease of operation.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured by means of safety devices.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port to transfer data to computer for analysis/storage evaluation etc.
• Manual control & release valve operation.
• Load Capacity : 100 kN, 200 kN, 400 kN, 600 kN, 1000 kN and 1200 kN.

Spring Testing Machine, incorporates design features to enable high accuracy testing with Economy, Speed and Versatility.

Features :

• Loading accuracy as high as + 1%
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable study the behavior of the material.
• Motor driven threaded columns for quick effortless adjustment of Test height.
• Simplicity in reading because of digital readouts.
• Large effective test space enables testing of a wide range of springs.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured by means of safety devices.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port to transfer data to computer for analysis/storage & evaluation.
• Manual control & release valve operation.