Delhi, India
GST : 07AAYFR4120N1ZL
Verified
Add Review
Our Product / Services
Additional Information:
Delivery Time : 45 Days
Used extensively in factories and storage facilities for the movement of goods between floors. Two kinds of lifts are on offer – Drumwound machine based or traction machine based. The capacities available range from 250 Kgs to 10 Tons.
Goods and workers can be transported to any number of floors. The size of the lifts can be from 3’ x 2’ to as large as 12’ x 20’. Standard height of the cabin is 6’ 7½”. The lift can open on the opposite side also ( 2 side open cabin).
Drumwound type without counterweight. This lift is simpler in design and suited for low cost installations. The movement of the lift is based on the coiling and uncoiling of a wire rope on a rotating drum. A unique feature of our drum design is the provision of two ropes coiling separately on a right hand thread groove and a left hand thread groove. This leads to lesser rope stress and longer life. These lifts are quicker to install and require lesser space.
Traction type with counterweight. This lift is a better machine designwise and also offers greater safety to the user. This is achieved first through the use of 3 or more independent wire ropes stretched across the main traction sheave. Second, there being no positive coupling between the lift and the machine leads to greater safety as a slip is permitted whenever there is an obstruction to the lift travel. Unlike in the drum wound design there is no overload on the motor in case of lift overshooting at the top floor. Jerk free, smooth travel is possible by the usage of 2:1 roping. Though smoother, traction lifts travel at higher speeds than drumwound lifts using the same power.
Notes
Client’s Scope
.
| Size Table for Goods Lift Dimensions ‘A’ to ‘L’ | |||||
|---|---|---|---|---|---|
| Max. Load | Cabin Inside ‘A’ x ‘B’ |
Lift Shaft, 2 Options | Entrance ‘E’ |
Machine Room ‘K’ x ‘L’ |
|
| One side open ‘C’ x ‘D’ |
Two side open ‘C’ x ‘D’ |
||||
| Kgs. | Width x Length | Width x Length | Width x Length | Width | Width x Length |
| 500 | 1100 x 1200 | 1600 x 1500 | 1600 x 1350 | 900 | 3000 x 3000 |
| 750 | 1300 x 1500 | 1800 x 1800 | 1800 x 1650 | 1100 | 3000 x 3000 |
| 1000 | 1400 x 1800 | 1900 x 2200 | 1900 x 1950 | 1200 | 3000 x 3000 |
| 1500 | 1700 x 2000 | 2300 x 2400 | 2300 x 2150 | 1500 | 3000 x 3000 |
| 2000 | 1700 x 2500 | 2300 x 2900 | 2300 x 2650 | 1500 | 3000 x 3000 |
| 2500 | 2000 x 2500 | 2600 x 2900 | 2600 x 2650 | 1800 | 3000 x 3000 |
| 3000 | 2000 x 3000 | 2700 x 3400 | 2700 x 3150 | 1800 | 4000 x 3000 |
| 4000 | 2500 x 3000 | 3200 x 3400 | 3200 x 3150 | 2300 | 4000 x 3000 |
| 5000 | 2500 x 3600 | 3300 x 3900 | 3300 x 3960 | 2300 | 4000 x 3600 |
Additional Information:
Payment Terms : T/T
Packaging Details : Loose Packing in One Full Truck load of 7 Tons
Delivery Time : 3 months
Additional Information:
Packaging Details : Loose in a full truck
Delivery Time : 3 months
Manual door lifts are preferred for low cost installations at private buildings handling where lift usage is infrequent. The advantages are low cost, low space requirement fast installation, low maintenance, low operation cost.
The range of lifts available is from 4 persons to 40 persons. The cabin walls can be of M.S. painted, M.S. Powdercoated or Hairline brush finished stainless steel. Collapsible channel gates or Swing doors with glass vision windows can be provided. Swing doors can be varied from floor to floor to suit the dcor.
The lifts can be traction machine based or hydraulic machine based depending on the machine room location.
Notes
Client's Scope
.
| Size Table | |||||
|---|---|---|---|---|---|
| Person | Load | Car Inside ‘A’ x ‘B’ |
Lift Shaft ‘C’ x ‘D’ |
Entrance ‘E’ |
Machine Room ‘K’ x ‘L’ |
| No. | Kgs. | Width x Length | Width x Length | Width | Width x Length |
| 4 | 272 | 1100 x 700 | 1600 x 1300 | 760 | 3000 x 3000 |
| 6 | 408 | 1100 x 1000 | 1600 x 1600 | 760 | 3000 x 3000 |
| 8 | 544 | 1300 x 1100 | 1800 x 1700 | 760 | 3000 x 3000 |
| 10 | 680 | 1350 x 1300 | 1850 x 1900 | 900 | 4000 x 3000 |
| 13 | 884 | 2000 x 1100 | 2500 x 1700 | 1000 | 4000 x 3000 |
| 16 | 1088 | 2000 x 1300 | 2500 x 1900 | 1100 | 4000 x 3600 |
Additional Information:
Delivery Time : 45 Days
Automatic door are recommended for lifts being used at public buildings handling high traffic. Though they require more space in the building as compared to manual doors, it is advisable to go for automatic doors. There is no need for a lift operator. The door panels can be designed to add to the décor of the building.
The range of lifts available is from 4 persons to 40 persons. The speed of travel ranges from single speed of 0.7m/s to variable speeds of 1.5m/s. The cabin walls & door panels can be of M.S. painted, M.S. Powdercoated or Hairline brush finished stainless steel. Glass doors can also be provided but are expensive. Normally center opening doors are advised due to their ease of use and elegance. However in places with a size constraint, telescopic doors can also be provided in which both the doors open towards one side.
Our lifts use Programmable Logic Controllers with auto fault display and detection capability. Modern amenities like variable speeds through ACVVVF drives, Automatic rescue device for electricity failure.
Notes
Client's Scope
Features:
Additional Information:
Delivery Time : 45 Days
.
| Size Table | |||||
|---|---|---|---|---|---|
| Person | Load | Car Inside ‘A’ x ‘B’ |
Lift Shaft ‘C’ x ‘D’ |
Entrance ‘E’ |
Machine Room ‘K’ x ‘L’ |
| No. | Kgs. | Width x Length | Width x Length | Width | Width x Length |
| 4 | 272 | 1100 x 700 | 1900 x 1550 | 800 | 3000 x 3000 |
| 6 | 408 | 1100 x 1000 | 2000 x 1650 | 800 | 3000 x 3000 |
| 8 | 544 | 1300 x 1100 | 2000 x 1750 | 800 | 3000 x 3000 |
| 10 | 680 | 1350 x 1300 | 2100 x 1950 | 900 | 4000 x 3000 |
| 13 | 884 | 1500 x 1500 | 2100 x 2150 | 900 | 4000 x 3000 |
| 16 | 1088 | 1750 x 1500 | 2350 x 2150 | 1000 | 4000 x 3600 |
| 20 | 1360 | 2000 x 1600 | 2600 x 2250 | 1000 | 4500 x 3600 |
| 24 | 1632 | 2100 x 1800 | 2600 x 2350 | 1100 | 4500 x 3600 |
Features:
Additional Information:
Delivery Time : 45 Days
Features:
Additional Information:
Delivery Time : 45 Days
Additional Information:
Delivery Time : 45 Days
Automatic door are recommended for lifts being used at public buildings handling high traffic. Though they require more space in the building as compared to manual doors, it is advisable to go for automatic doors. There is no need for a lift operator. The door panels can be designed to add to the décor of the building.
The range of lifts available is from 4 persons to 40 persons. The speed of travel ranges from single speed of 0.7m/s to variable speeds of 1.5m/s. The cabin walls & door panels can be of M.S. painted, M.S. Powdercoated or Hairline brush finished stainless steel. Glass doors can also be provided but are expensive. Normally center opening doors are advised due to their ease of use and elegance. However in places with a size constraint, telescopic doors can also be provided in which both the doors open towards one side.
Our lifts use Programmable Logic Controllers with auto fault display and detection capability. Modern amenities like variable speeds through ACVVVF drives, Automatic rescue device for electricity failure.
Notes
Client's Scope
Features:
Additional Information:
Delivery Time : 45 Days
.
| Size Table | |||||
|---|---|---|---|---|---|
| Person | Load | Car Inside ‘A’ x ‘B’ |
Lift Shaft ‘C’ x ‘D’ |
Entrance ‘E’ |
Machine Room ‘K’ x ‘L’ |
| No. | Kgs. | Width x Length | Width x Length | Width | Width x Length |
| 4 | 272 | 1100 x 700 | 1900 x 1550 | 800 | 3000 x 3000 |
| 6 | 408 | 1100 x 1000 | 2000 x 1650 | 800 | 3000 x 3000 |
| 8 | 544 | 1300 x 1100 | 2000 x 1750 | 800 | 3000 x 3000 |
| 10 | 680 | 1350 x 1300 | 2100 x 1950 | 900 | 4000 x 3000 |
| 13 | 884 | 1500 x 1500 | 2100 x 2150 | 900 | 4000 x 3000 |
| 16 | 1088 | 1750 x 1500 | 2350 x 2150 | 1000 | 4000 x 3600 |
| 20 | 1360 | 2000 x 1600 | 2600 x 2250 | 1000 | 4500 x 3600 |
| 24 | 1632 | 2100 x 1800 | 2600 x 2350 | 1100 | 4500 x 3600 |
