Write a ReviewOur Products
Our offered Product range includes Compact Solenoid Valve, Oil Control Valve, Motorised Butterfly Valve, ANGLE TYPE CONTROL VALVE and Centric Disc Butterfly Valve.
Manufacturer & Supplier of Angle Type Valve. Our product range also comprises of Diaphragm Type Control Valve, Cylinder Operated Control Valve and Solenoid Valve.
Features: Sturdy construction High strength Elevated durability
With the help of our team of highly experienced professionals, we are involved in offering our clients an extensive assortment of Centric Disc Butterfly Valve. Our offered valve has inbuilt disc that rotates on shaft to control the flow of fluid. This valve is widely acclaimed for its simple design yet large capacity to handle liquid in bulk amount. Customers can avail this optimum quality valve from us at most affordable prices.
Features:
Low leakage rateLarge capacityHigh anti-erosion ability
Operation can be from Lever/Gear/Electro Pneumatic/Electrically Actuated/Cylinder Operated.
Manufacturer & Supplier of Globe Valve & Globe Vale. Our product range also comprises of Diaphragm Type Control Valve, Cylinder Operated Control Valve and Solenoid Valve.
Design Features:
Material Structure:
End Connection: Flanged end raised face, Butt weld end, RTJ, etc.
Operation : Hand wheel, Gear operator, Electrical Actuator, Pneumatic, Hydraulic
Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastalloy, Inconel, Duplex Stainless Steel.
Trim : 13% Cr. Steel, 304, 304L, 316, 316L, 321, 347, Monel, Duplex Stainless steel.
Control Operation: Manual, Pneumatic, Electric
Manufacturer & Supplier of GATE VALVE & Knife Edge Gate Valve. Our product range also comprises of Diaphragm Type Control Valve, Cylinder Operated Control Valve and Solenoid Valve.
We manufacture a wide range of Gate Valves which include knife gate valves, cast iron gate valves and flangled gate valves.Gate Valves are Outside Screw & Yoke, Bolted bonnet & with Rising stem. The STRAIGHT THROUGH BORE design assures minimum turbulence, erosion and resistance to flow caused by pockets & recesses. Gate Valves are mainly used where minimum pressure drop is a requirement.
Design Features:
Material Structure:
End Connection: Flanged end raised face, Butt weld end, RTJ, etc.
Operation : Hand wheel, Gear operator, Electrical Actuator, Pneumatic, Hydraulic
Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Inconel, Duplex Stainless Steel.
Trim : 13% Cr. Steel, 304, 304L, 316, 316L, 321, 347, Monel, Duplex Stainless steel.
Control Operation: Manual, Pneumatic, Electric
We manufacture a wide range of Check Valves which includes swing check valves, ball check valves and many more valves.Swing Check Valves are having Bolted cover, Swing type disc. These valves are used to prevent flow reversal in piping systems. They are suitable for service in horizontal (flow up through valve only) piping runs. Swing Check Valves have low pressure drop and are best suited for moderate velocity applicationsSwing Check Valves are suitable for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.
Material Structure:
End Connection: Flanged end raised face, Butt weld end, RTJ, etc.
Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastalloy, Inconel, Duplex Stainless Steel.
Trim : 13% Cr. Steel, 304, 304L, 316, 316L, 321, 347, Monel, Duplex Stainless steel.
Accessories:
Modulating Controller: 4 20 mA (Available on request)Potentiometer Feedback: Available on request
We are ranked amongst the foremost firm that is engaged in manufacturing and supplying a wide range of NC Pilot Operated Direct Acting Solenoid Valve. Our offered valve uses an electric motor to operate its on and off mechanism efficiently. This unmatched quality valve is ideally used for remote fluid and gases control applications. Besides, customers can avail this control valve from us at market leading prices.
Features:
Long service lifeCompact designOptimum performance
1/4"-1 2/2, 2/3 Way NC Pilot operated Direct Acting Solenoid valve.
In line with clients variegated requirements, we bring forth a distinguished collection of the 3 Way Diaphragm Operated Pneumatic Control Valve. This valve is manufactured at our ultra-modern production unit utilizing the superb quality raw material and innovative technology in conformance with defined quality standards. Extensively used to control the flow of liquid, air and gas, this valve is tested on various parameters to ensure its quality.
Features:
3 way Diaphragm operated Pneumatic Control Valve for Mixing/Diverting Duty.
Accessories:
We are a leading Manufacturer & Supplier of Cylinder Operated Control Valve such as 3/2 Way Pneumatic Cylinder Operated Control Valve, 2 Way Pneumatic Cylinder Operated Control Valve and 3 Way Pneumatic Cylinder Operated Control Valve from India.
We feel immensely pleased to offer an exclusive gamut of 3/2 Way Pneumatic Cylinder Operated Control Valve. Our offered valve is manufactured by utilizing optimum quality raw material that is obtained from certified and authentic vendors of the industry. The valve offered by us extensively acknowledged in the market for its high pressure bearing capability and elevated durability. Keeping in mind the budgetary requirements of our prestigious clients, we provide this valve at rock bottom price.
Features:
Easy installationResistance against corrosionAccurate dimension
3/2 way Pneumatic Cylinder operated Control Valve for Low Temperature.
Vipan Mehta(Regent Industrial Products)
Regent Industrial Products, Khokhra, Ahmedabad, Gujarat - 380008
Share us via 
