Our Products
Relemac Technologies Pvt. Ltd. is a Domestic Cable Manufacturer providing such high-quality House Wiring Cables that consultants, architects and builders never worry about. We are one of the most recommended Electrical Building Wire Manufacturers and our House Wiring Cables and Electrical Building Wires are used by professionals who want the best both inside of India and throughout the world.
We have been in the business of Domestic Cables for more than nineteen years, and have built our reputation through innovative design features and an unflagging dedication to use the best materials and the best manufacturing processes in the production of all cables. Our Domestic Cables and house wiring products are guaranteed and far exceed the ISI certifications. Our Electrical Building Cables are tested at every step of the manufacturing process by experienced engineers, and we are known throughout the construction industry for our quality control, modern manufacturing capabilities and design and manufacturing personnel.
Conductor
All of our copper conductors are made from high conductivity copper rods. These 8 mm diameter rods are made from 99.97% pure, electrolytic grade, bright annealed bare copper with an excess of 100% conductivity. This grade of copper guarantees a low energy loss due to line irregularities and inefficiencies which can result in lower electric usage. The rod is drawn to the required wire size for the wire that is being manufactured. Annealed plain copper conductors used in flexible cables and cords conform to the requirements of table 3 Class 5 of IS:8130 -1984. Custom sizes can also be made for specific customer needs, as well as custom colors for job specific requirements.
Insulation
Relemac Technologies House wires are mainly available readily in PVC insulations & also manufactured in various other insulations like, FR PVC / FRLS PVC / HR PVC / Zero Halogen & PTFE With HR PVC.
PVC Insulation
The insulation of the wire is achieved by using a Type 'A' PVC compound suitable for a maximum continuous conductor operating temperature of 70º to conform to IS:694-2010. The wire is insulated by means of an extrusion process which generates the required insulation thickness for the job, and they all conform to the requirements set forth in IS:5831-1984.
PVC forms the basis of all of the following forms of insulation, but different formulations have been designed to fit certain legal and customer requirements. If you have any questions about specific applications of any of these insulators or any of our other products please be sure to contact out customer service experts.
FR Insulation
FR PVC insulation has better fire retardant properties than normal PVC. This FR PVC compound has a high oxygen and temperature index. The wires are wadded with a flame retardant (FR) PVC compound, which helps to control the spread of fire even at very high temperature. It also protects against electrical shock and short circuit.
FRLS Insulation
Whenever a fire breaks-out in any building/Complex, the burning of wire emanates, the toxic, black smoke, which causes injury and subsequently becomes fatal to the human life. FRLS PVC insulation provides better fire retardant properties than normal PVC & also emits Low Smoke, in case of fire.
HR PVC Insulation
Depending on where you live and how a structure is built, some wires may routinely be exposed to temperatures which would degrade wires made from the normal formulations of PVC. To counteract this, Relemac Technologies has formulated our Heat Resistant PVC insulation to specifically address situations where a heated resistant wire is needed. The HR PVC Insulation ensures stability at conductor temperatures of 85ºC and 105ºC and are designed to adhere to the standards set forth in HR85 and HR 105 PVC.
ZERO HALOGEN Insulation
For extreme uses, Relemac Technologies' Zero Halogen insulation holds the highest heat resistance, making it the best flame retardant insulation. This is critical for certain uses, including buildings which would routinely house large numbers of people or critical infrastructure. Zero Halogen insulation requires temperatures in excess of 300ºC to catch fire with a 1% Oxygen atmosphere.
Zero Halogen is critical when you must maintain control of electrical components for as long as possible if a fire should break out. Because of the high ignition properties of this insulation, the onset of smoke and an extra flame source will help control the spread and devastation of the fire, at least to a small amount.
PTFE With HR PVC Insulation
PTFE with HR105 PVC is designed for high cost and sensitive installations where fire from electrical short circuits may cause damage to human life & property. PTFE can withstand, operating temperature from -650C to +2600C.
Comparative Properties Of RELEMAC House Wires
Feature | Normal PVC Wire | Heat Resistance HR-PVC | Fire Retaradant FR-PVC | Fire Retardant Low Smoke FRLS | Zero Halogen Low Smoke |
---|---|---|---|---|---|
Insulation Material | PVC | PVC | Spl. PVC | Spl. PVC | Spl. Polymer |
Insulation Property | Normal | Good | Good | Good | Very Good |
Temperature Rating | 70 Deg' C | 85 Deg' C | 70 Deg' C | 70 Deg' C | 85 Deg' C |
Thermal Stability | Normal | Very Good | Good | Good | Very Good |
Flame Retardancy | Good | Good | Very Good | Very Good | Excellent |
Safety During Burning | Average | Average | Good | Good | Excellent |
Requirement of Oxygen to catch fire (% in air) | >21 | >21 | >30 | >30 | >35 |
Temperature Required to Catch Fire (with 21% oxygen) | Room Temp. | Room Temp. | >250 Deg' C | >250 Deg' C | > 300 Deg' C |
Visibility during Cable Burning (%) | <20 | <20 | <35 | >40 | >80 |
Release of Halogen Gas during burning (% by weight) | <20 | <20 | <20 | <20 | Zero |
Abrasion Resistance During Installation | Good | Good | Good | Good | Good |
Single Core Unsheathed Flexible Multicore Cables In 1100 Volts
Nominal cross sectional area of Conductor Sq.mm | Number/Nom. Dia. of wire mm | Nominal Thickness of Insulation mm | Overall Diameter (Approx.) mm | Current carrying capacity #2 cables, single phase | Max. resistance of Conductor per Km @ 20 C Ohms. | |
---|---|---|---|---|---|---|
In conduit/Trunking Amps. | Unenclosed-clipped directly to a surface or on cable tray Amps. | |||||
1 | 14/0.3* | 0.7 | 2.8 | 11 | 12 | 18.1 |
1.5 | 22/0.3* | 0.7 | 3.1 | 13 | 16 | 12.1 |
2.5 | 36/0.3* | 0.8 | 3.75 | 18 | 22 | 7.41 |
4 | 56/0.3** | 0.8 | 4.25 | 26 | 29 | 4.95 |
Standard Colours: Black, Red, Blue, Yellow, Green. (for earthing) Supplied in 90 metre lengths in attractive cartons. Confirm to IS-694-2010. * As per conductor class 2 of IS : 8130/1984 ** As per conductor class 5 of IS : 8130/1984 #As per IS 3961 (part V)-1968 Note: Wire size is for reference only and may vary with in the tolerance as such to maintain the Current Resistance as per BIS standard. |
||||||
6 | 84/0.3 | 0.8 | 5.4 | 33 | 37 | 3.3 |
10 | 140/0.3 | 1 | 6.8 | 45 | 51 | 1.91 |
16 | 101/0.45 | 1 | 8 | 59 | 68 | 1.21 |
25 | 158/0.45 | 1.2 | 10 | 71 | 86 | 0.78 |
35 | 220/0.45 | 1.2 | 11.1 | 91 | 110 | 0.55 |
50 | 315/0.45 | 1.4 | 13.2 | 120 | 140 | 0.39 |
House Wiring Suppliers in 90 meters lengths in Polythene & Cloth Packing Standard Colours: Red, Yellow, Blue & Black | Confirm to IS:694-2010. * Sample card available on request. (1 to 4 Sq mm.) |
Networking / Lan Cables
At Relemac Cables, we are a trusted manufacturer and supplier of LAN cables, signalling cables, structural cables, and data cables in India. Our LAN cables are designed by experienced professionals and manufactured using the latest technology, ensuring that they meet the highest standards of quality and performance. We offer a range of LAN cables in various specifications, including bulk purchases to cater to the diverse needs of our customers.
In addition to LAN cables, we also provide signalling and structural cables that are designed for specific requirements. Our signalling cables are used for transmitting signals over long distances, while our structural cables are perfect for large buildings and other structures.
Our data cables are ideal for customers who require a connection between their computer and GPS device. These cables are available in the newer USB or the older serial protocol, depending on your needs. All our cables are tested and approved to provide a stable and reliable connection.
Specifications
Product State | Transmission Characteristics | ||
---|---|---|---|
Type | CAT-5E FTP | Impedance(zo) 1-100MHz | 100 ± 15ohms |
Standard | 4 Pairs | Attenuation(IL) 100MHz | :22dB/100m |
Return Loss(RL) 100 MHz | 20dB/100m | ||
Material Construction | Next 100MHz | 35 dB/100m | |
Conductor | Copper 0.50mm | PSNEXT 100 MHz | 32.3dB/100m |
Insulator | Solid PE 1.00mm | ELFEXT 100MHz | 24dB/100m |
Tape | Polyester Ribbon 30mm | PSELFEXT 100MHz | 21dB/100m |
Drain wire | Tinplate Copper 0.50 | Velocity of propagation 100MHz | 0.620/100m |
Shield | AL Foil 70mm | Delay 100MHz | 538 ns/100m |
Jacket | PVC | Speed (SKEW) 1-100MHz | 45ns/100m |
Delivery Instruction | Product Standard | ||
Length | 305m/box | ISO/IEC 11801 | |
Diameter | 6.5 ± 0.1mm | ANSI/EIA/TIA-568-B | |
Max Strain Power | 80N | YD/T1019-2001 | |
Temperature Range | -40ºC ~ +60ºC | YD/T838-1976 |
Specifications-2
Product State | Transmission Characteristics | ||
Type | CAT -6E FTP | Impedance(ZO) 1-250MHz | 100 ± 15 Ohms |
Standard | 4Pairs | Attenuation(IL) 250MHz | 22dB/100m |
Return Loss(RL) 250 MHz | 20dB/100m | ||
Material Construction | Next 250MHz | 38.3dB/100m | |
Conductor | Copper 0.55 mm | PSNEXT 250 MHz | :36.3dB/100m |
Insulation | Solid PE 1.10mm | ELFEXT 250MHz | 19.8dB/100m |
Type | Polyster Ribbon 30mm | PSELFEXT 250MHz | 16.8dB/100m |
Drain wire | Tinpate Copper 0.50 | Velocity of propagation 250MHz | 0.620/100m |
Shield | AL Foil 70mm | Delay 250MHz | 538 ns/100m |
Jacket | PVC | Speed(SKEW )1-250MHz | 45ns/100m |
Delivery Instruction | Product Standard | ||
Length | 305m/box | ISO/IEC 11801 | |
Diameter | 7.3 ± 0.1mm | ANSI/EIA/TIA-568-B | |
Max Strain Power | 80N | YD/T1019-2001 | |
Temperature Range | -40ºC ~ +60ºC | YD/T838-1976 | |
UL-444 |
Standard -4
Product State | Transmission Characteristics | ||
---|---|---|---|
Type | CAT -5E UTP | Impedance(ZO) 1-100MHz | 100±15 Ohms. |
Standard | 4Pairs | Attenuation(IL) 100MHz | 22dB/100m |
Material Construction | Return Loss(RL) 100 MHz | 20dB/100m | |
Conductor | Copper 0.50 mm | Next 100MHz | 35 dB/100m |
Insulation | Solid PE 0.90 mm | PSNEXT 100 MHz | 32.3dB/100m |
Jacket | PVC | ELFEXT 100MHz | 24dB/100m |
PSELFEXT 100MHz | 21dB/100m | ||
Velocity of propagation 100MHz | 0.620/100m | ||
Delay 100MHz | 538 ns/100m | ||
Speed(SKEW )1-100MHz | 45ns/100m | ||
Delivery Instruction | Product Standard | ||
Length | 305m/box | ISO/IEC 11801 | |
Diameter | 5.4 ± 0.1mm | ANSI/EIA/TIA-568-B | |
Max Strain Power | 80N | YD/T1019-2001 | |
Temperature Range | -40ºC ~ +60ºC | YD/T838-1976 | |
UL-444 | |||
This category 5E, for pair is a high-speed high performance, 100 ohm impedance cable capable of carrying high bit-rate signaling for extended distances in horizontal cabling. Applications can include Voice, ISDN, ATM 155 Mbps, ATM 622 Mbps, 100 Mbps TPDDI, Fast and Giga Ethernet, 100 BASE-T Mbps TP-PMD, 100 Base - T. | |||
Specifications-3
Product State | Transmission Characteristics | ||
Type | CAT -6E UTP | Impedance(ZO) 1-250MHz | 100 ± 15 Ohms. |
Standard | 4Pairs | Attenuation(IL) 250MHz | 32.8dB/100m |
Return Loss(RL) 250 MHz | 17.3 dB/100m | ||
Material Construction | Next 250MHz | 38.3dB/100m | |
Conductor | Copper 0.55 mm | PSNEXT 250 MHz | 36.3dB/100m |
Insulation | Solid PE 1.00mm | ELFEXT 250MHz | 19.8dB/100m |
Center Cross | PE | PSELFEXT 250MHz | 16.8dB/100m |
Jacket | PVC | Velocity of propagation 250MHz | 0.620/100m |
Delay 250MHz | 536 ns/100m | ||
Speed(SKEW )1-250MHz | 45ns/100m | ||
Delivery Instruction | Product Standard | ||
Length | 305m/box | ISO/IEC 11801 | |
Diameter | 6.8 ± 0.1mm | ANSI/EIA/TIA-568-B | |
Max Strain Power | 80N | YD/T1019-2001 | |
Temperature Range | -40ºC ~+60ºC | YD/T838-1976 | |
UL-444 | |||
his category 6, four pair cable is a high-speed high performance, 100 ohm impedance cable capable of carrying high bit-rate signaling for extended distances in horizontal cabling. Applications can include Voice, ISDN, ATM 155 Mbps, ATM 622 Mbps, 100 Mbps TPDDI, Fast and Giga Ethernet and IEEE 802.3/5/12, 100 BASE VG(100 BASE NE), 100 BASE -T Mbps TP-PMD, 100 Base - T and any other further applications designed for Category 6 Cables. | |||
We are one of the most sought-after Submersible Cable Manufacturers. The PVC Insulated & Sheathed 3 core flat submersible cables that we deal in are ideal for usage in submersible pumps in deep wells for irrigation (Direct Burial), drinking water supply, industries, mines, fountains. Our company is the manufacturer of a wide range of Submersible Flat Cables that are designed as per ISI 694:2010. The Submersible 3 Core Flat / Round Cables are amongst our best products offered to the clients. Sheathed Round Submersible Cables are made from bright electrolytic grade copper and a proper care is taken to ensure their highest flexibility and uniform resistance. All our Submersible Pump Cables are highly durable, and we provide these to our client's at the most competitive prices, which are the best in the market as compared to the prices offered by our competitors.
Cable Design: Relemac 3 Core Flat /Round Cables are manufactured keeping in mind the severe and difficult conditions in which they are required to perform. The area of installation is physically restrictive, and the environment is very hostile. Relemac is designed and manufactured keeping in mind these factors to achieve the highest possible degree of reliability.These are used to connect submersible pump motor with supply lines, The slot available in the tube well being narrow the shape of the cables has to be suited for such an application. Certain striking features of our Flat Submersible Pump cables include excellent resistance to water, moisture, abrasion, grease, oil, long flex life, excellent mechanical & electrical properties.
650/1100 VOLTS RELEMAC 3CORE FLAT CABLES FOR SUBMERSIBLE PUMPS
Note :
The number of wires is approximate and wire diameter is nominal; they shall be such as to satisfy the requirements of conductor resistance as per Class 5 of IEC 60228 / DIN VDE 0295 / IS 8130 / BS 6360
Applications: - Irrigation, Drinking Water-Supply Industries, Deep Well, Fire Fighting, Sea Water Handling, Sewage Treatment Plants, Offshore Drilling Rigs, Mine Dewatering & More.4 core and 5 core flat cables are available on request.
Specifications
CONDUCTOR | PVC INSULATION | PVC SHEATH | CURRENT Rating at 40°C Amps. | Approx Weight Kg./Km. | ||||
---|---|---|---|---|---|---|---|---|
Nominal Area in | Nos. & Dia. of wire | Nominal Thickness | Nominal Core Dia. | Nominal Thickness | Approx. Overall Dimensions | |||
Sq. mm. | Nos. / mm | mm | mm | mm | Thickness mm | Width mm | ||
1.5 | 22/0.30 | 0.8 | 3.25 | 1.15 | 6 | 12.8 | 14 | 103 |
2.5 | 36/0.30 | 0.9 | 3.84 | 1.15 | 6.4 | 14.6 | 18 | 152 |
4 | 56/0.30 | 1 | 4.5 | 1.15 | 7.4 | 16.8 | 26 | 211 |
6 | 85/0.30 | 1 | 5.3 | 1.15 | 7.9 | 18.7 | 31 | 306 |
10 | 140/0.30 | 1 | 6.5 | 1.4 | 9.9 | 23.7 | 42 | 502 |
16 | 226/0.30 | 1 | 8 | 1.4 | 11.4 | 28 | 57 | 746 |
25 | 354/0.30 | 1.2 | 10.1 | 2 | 14.7 | 35.5 | 72 | 1143 |
35 | 495/0.30 | 1.2 | 11.3 | 2 | 16.2 | 39.5 | 90 | 1495 |
50 | 703/0.30 | 1.4 | 13.6 | 2.2 | 18.3 | 45.5 | 115 | 2062 |
70 | 440/0.45 | 1.4 | 15.3 | 2.2 | 20 | 51 | 143 | 2685 |
95 | 475/0.50 | 1.6 | 18 | 2.4 | 23.5 | 60 | 165 | 3325 |
RELEMAC DOUBLE SHEATHED ROUND CABLES FOR SUBMERSIBLE PUMPS
650 / 1100 VOLTS
Nos. of cores and core area | Approx. outside diameter | Nos. of cores and core area | Aprox. outside diameter |
---|---|---|---|
Nos. X mm2 | mm | Nos. X mm2 | mm |
3 X 1.5 | 10 | 4 X 1.5 | 10.8 |
3 X 2.5 | 11 | 4 X 2.5 | 12.2 |
3 X 4 | 13 | 4 X 4 | 14.1 |
3 X 6 | 14.6 | 4 X 6 | 16 |
3 X 10 | 18 | 4 X 10 | 20.8 |
3 X 16 | 21.2 | 4 X 16 | 23.4 |
3 X 25 | 26 | 4 X 25 | 28.8 |
3 X 35 | 28.3 | 4 X 35 | 31.5 |
3 X 50 | 33.5 | 4 X 50 | 37.3 |
3 X 70 | 37.8 | 4 X 70 | 42.2 |
3 X 95 | 43.5 | 4 X 95 | 48.8 |