My ExportersIndia

For Buyer

For Seller

For Help

Our Product / Services

  1. Spectrometers 7 Products available
  2. Sensors 4 Products available
  3. Microscope 3 Products available
  4. Measuring Instruments & Equipment 2 Products available
  5. Software Development Service 2 Services available
  6. Optical & Laser Instruments 2 Products available
  7. Diodes 2 Products available
  8. Surgical Light Source 2 Products available
  9. Eyewear 2 Products available
  10. Packaging Foils & Films 1 Products available
  11. Measurement Gauges & Fittings 1 Products available
  12. Lamps 1 Products available
  13. Laboratory Equipments 1 Products available
  14. Spectrophotometers 1 Products available
  15. Lenses 1 Products available
  16. Eye Care & Surgery Equipment 1 Products available
  17. Window 1 Products available
  18. Metal & Metal Products 1 Products available
  19. Mirrors 1 Products available
  20. Electronic Components 1 Products available
  21. Surveillance Equipment 1 Products available
  22. Podium 1 Products available
  23. Specialty Chemicals 1 Products available
  24. Others Products / Services 62 Products / Services available

Products / Services

Our offered Product range includes ND-3800 NANO DOT Microspectrophotometer, LDV System fp40LD with Backward and Forward Scattering, External Cavity Diode Laser, Cateye Laser CEL002 and PIV Nano Camera.

TLSE Enhanced Wavelength Tunable Monochromatic Light Source

TLSE Enhanced wavelength tunable monochromatic light source is updated from TLS further optical and alignment optimization, optimize the gratings, mirrors, light source power supply, bulb and so on, make the TLSE light source output optical power optimization, and more important is we can guarantee the consistency of the output light intensity for each unit. Currently we are providing TLSE including 1. TLSE1805i-X150 (UV-NIR, 200-2000 nm) 2. TLSE1805i-EQ (UV-NIR, 200-2000 nm) 3. TLSE1815i-SiN40 (IR, 1-14m) 4. TLSE1805i-X150 (UV-NIR, 200-1500 nm)
View Complete Details

Particle Image Velocimetry

  • Purity High power LED Volume or light sheet Synchronization PIVTecILA software Easy setup Background illumination ILA.PIV.Nano Camera Also suited for MicroPIV Etc
  • Specifications Pulses 0.200A Power 0.47mW/ cm2 Colours green, blue, red, white, UV Length 120mm (without op
Particle Image Velocimetry is a non-intrusive laser optical technique used for determination of the velocity distribution in fluids. The complexity of a system can strongly vary depending on the type of application, however the basic principle of PIV stays the same. For the purpose of PIV, the fluid is seeded with light scattering particles, which are believed to follow the flow dynamics. The flow is illuminated by a concentrated light source, normally a laser, where as a special camera is acquiring the reflected light from tiny particles in the flow. The camera takes two consecutive images which are synchronized with the two light pulses. The light pulse is very short such that single particles can be identified in the images without blurring effects. The cross correlation software then calculates the displacement of the particles between the first and second image. Since the time between the two light pulses is known, the velocity field can be calculated.
View Complete Details

Laser Doppler Velocimetry (LDV)

  • Purity Simple setup and alignment Long term stability High laser power transferred to the measurement volume High measurement accuracy No optical transmission fibers Etc.
We offering following types of Laser Doppler Velocimetry (LDV) A. Probefor Laser Doppler Velocimetry1. 2Dfp50 LDV probe2. fp50HeNe LDV probe3. fp50shift-532nm LDV probe4. fp50shift-660nm LDV probe5. fp50shift LDV beam combiner B. LDV Controller
View Complete Details

LDV System Fp40LD With Backward And Forward Scattering

The benefit of the new fp40 system is the capability to use backward AND forward scattering. If the optical access allows forward scattering you get more signal power. The light collector, developed by ILA, can be positioned with in the area the particles reflect the light, so there is more flexibility when using that system! The light collector can further more also be used seperately with our other LDV systems, so you can extend these systems too! As you need two optical accesses to use forward scattering, there is the possibility to use ourself-designed window chambers.
View Complete Details

High-Speed Motion Capture System

  • Features Up to 5 hours of continuous recording 5-1000 fps high resolution cameras 5-1000 fps high resolution cameras 2-D and 3-D video-based motion analysis Etc
The High-Speed Motion Capture System developed by Xcitex, is MiDAS and award winning ProAnalyst software for video engineering, introduces a new low-cost, high-performance motion capture system designed to record live video and data synchronously. The ProCapture motion capture system is ideal for researchers and engineers who study motion in a variety of industries such as aerospace, applied science, automotive, ballistics, biomechanics and sports, research and development, life sciences, process control and engineering. The foundation of the ProCapture system is the 1000 fps Xcitex high resolution camera controlled by the feature-rich ProCapturesoftware. In addition, ProAnalyst motion analysis software is included with each ProCapture system so that motion can becaptured, downloaded and analyzed in minutes. The ProCapture system can be configured with as many as eight Xcitex high-speed cameras and up to 32 channels of datacollection for either 2-D or 3-D motion capture and analysis. Video and data sources are automatically synchronized, ensuringa multi-perspective capture of every significant event.
View Complete Details

Detector Responsivity Measurement System

Photodetector is the sensor that could convert the optical radiation signal to the electrical signal, which is made from photoemission material. Most of the photodetectors have strong spectral selectivity in a certain Spectrum area. Therefore, for one photodetector, different wavelengths have different spectral responsivity. The spectral responsivity is an important parameter index for characterizing the photodetector performance. And for the photoelectric material researching, the effect of some characteristics of the material itself such as doping density, lattice imperfection, absorption coefficient and minority carrier diffusion length on the photoelectric response capacity and the quantum efficiency could be obtained by measuring and analyzing the spectral responsivity data. That is very important and helpful for choosing better material and processing improvement.
View Complete Details

Autocollimator

Nikon 6D: Autocollimator for measurement of very small angular errors Telescope's magnification: 38xObjective f=700mm; effective aperture: 70mmMeasuring range: 30 arcminMeasuring unvertainty: 0.5" arcsec within an area of 5 arcmin1 arcsec within an area of 30 arcminLight source: LED
View Complete Details

Scanning Ion Conductance Microscopy

  • Applications Cell morphology and membrane structures Temporal changes in healthy and diseased cells Stimulation and material introduction studies Cell-growth response to substrates and cues Etc.
Scanning Ion Conductance Microscopy (SICM) isa technique for mapping the nano-scale topography of soft and delicate surfaces. It provides powerful multi-channel capability in a single instrument. Scanning Electrochemical Microscopy (SECM)-SICM , optical and confocal-SICM, and targeted patch clamping-SICM are some of the operating configurations available. Scanning ion conductance microscopy (SICM) in topography imaging tool can be used for ion channel event recording, mechanical stimulation, simultaneous ion current and electrochemical current recording, localized delivery, single cell sampling and transport studies.
View Complete Details

External Cavity Diode Laser

The MOGLabs External Cavity Diode Laser offers research quality at a teaching-lab price. The ECD004 is robust and stable. When used with a MOGLabs Diode Laser Controller, mode-hop-free scanning range of up to 40GHz and linewidth below 100 kHz can be achieved using a low-cost uncoated 780 nm consumer diode. Diode replacement and re- alignment are easily accomplished by the end-user. Wavelength options extend from 370nm to 1064nm, and powers up to 200mW extra-cavity.
View Complete Details

Cateye Laser CEL002

  • Purity Cateye filter design Fast piezo feedback Precision wavelength adjust High bandwidth direct modulation Microwave RF modulation Diode protection circuit and relay Etc.
The Cateye Laser from MOGLabs offers a new wist in external cavity diode lasers. A cateye reflector and ultranarrow filter replace the alignmentsensitive diffraction grating of conventional LittmanMetcalf and Litrow designs. The CEL002 is robust, stable, and acoustically inert. You can literally hit it with a hammer and it will stay locked, and it is inherently self aligning so you can tune tens of nanometers without having to realign. In combination with MOGLabs electronics, the linewidth can be well below 100 kHz. Most laser diode wavelengths are available, for example 393 to 400, 423 to 426, 460, 470, 638, 647, 671, 739 to 800, 820 to 895, 920 to 935, at powers up to 200mW extracavity
View Complete Details

Diode Laser Controller

  • Purity ntuitive controls with logarithmic response Auto-lock to centre of oscilloscope trace Two oscilloscope trace selector switches Eight functions in one unit: Etc
  • Applications Laser cooling and trapping Bose-Einstein condensation Quantum optics: squeezed light Electromagnetic
The MOGLabs Diode Laser Controller provides everything needed to drive your tunable external cavity diode laser (ECDL), and lock it to an atomic or other frequency reference. It offers a combination of impressive performance and ease-of-use: ergonomic and low-noise analogue controls, and intuitive front-panel selection of the signals you need to monitor. Our latest release simultaneously drives independent piezo tilt and translation.
View Complete Details

FTIR Accessory

  • Purity Compact sample compartment design to save lab space Uses FTIR detectors – DTGS or MCT Available with transmission, reflection and ATR High throughput optical design Simultaneously view and collect spectrum Etc
We offers several sampling accessories for specific spectroscopic analysis of unique sample forms such as evolved gases from TGA analysis, and separated gases from GC analysis. The External Sample Module may be tailored to accommodate complex sampling experiments while keeping the main sample compartment free for routine experiments. We are offering following accessory for FTIR 1. Sample Compartment Microscope for FTIR 2. Beam Condensers 4X and 6X Versions for FTIR 3. Identification and Quantification of Evolved Gases from Thermogravimetric Analyzer 4. GCFTIR Accessory 5. External Sample Module Extending Sampling Efficiency
View Complete Details

Grating Spectrographs

All of them are based on tried and trusted optical design which are optimized for maximum performance in the spectral range from 200 nm to 1100 nm, a range which can be analyzed using silicon based CCD-line detectors. The SGM100 uses a crossed Czerny-Turner design with optical traps which produces the least stray light and maximum optical resolution.
View Complete Details

Triple Spectrograph

  • Purity Wavelength range: 200-800nm Relative wave number range: 50-18000 cm-1 Resolution: 3cm-1 Repeatability: 5cm-1 Etc.
The Triple MonochromatorsSpectrographs include three 500 mm focus monochromators which are with fine alignment. The first two monochromators as the dispersion subtraction are used to reduce the stray light. The third monochromator as dispersion sum configuration is used to improve the resolution. And each unit can work well as the monochromator, and the two unit can also be used as the double monochromator. The first and the second monochromator are the side entrance and double exits, the third monochromator is the double entrances and double exits, it is easy to connect the CCD and PMT, the single channel detectors. There are three import gratings in each monochromator, and the spectral range is located in deep UV region, the middle UV and visible region. Each grating reflectivity can be up to 70% in their spectral region. Mainly used in high grade Raman spectroscopy measurement, such as UV-resonance Raman spectroscopy.
View Complete Details

General Purpose Raman Probes

Our RPB and RPS Raman probes are versatile sampling accessories for lab applications. The probes are available for 532 nm, 785 nm and other excitation wavelengths, with FC and SMA 905 connectors for excitation and collection fibers. RPB probes are anodized aluminum with a stainless steel tip and include a manual safety shutter; RPS probes are stainless steel and include an emission indicator. These are non-immersion probes that are ideal for measurement of solids and surfaces and for measurement through glass and plastics.
View Complete Details

Raman Process Probes

With an extension tube design to protect probe optics from the high temperatures of process environments, RPP Raman process probes help bring Raman spectroscopy to industrial applications. The RPPs pressure-tight, stainless steel extension tube can be immersed in process streams and hostile environments without affecting the probes Raman-optimized filtering and focusing optical design. RPP probes are available for 532 nm, 785 nm and other excitation wavelengths, with FC and SMA 905 connectors for excitation and collection fibers. The probes are rated to 3000 psi and can be heated to 500 C.
View Complete Details

Raman Spectrometers Ventana Series

  • Applications Biotechnology Applications Medical Diagnostics Protein & Nucleic Acid Analysis Agricultural Etc.
  • Product details Modular – connects to light sources, cuvettes and other accessories Compact – small footprint Powerful – high performance optical bench with HD volume phase holographic grating
Summary of Ventana Features and Benefits Ventana spectrometers are high throughput, high sensitivity benchtop instruments for your lab and QAQC environments. They are a great choice for Raman analysis and fluorescence measurements, offering short integration times for fast measurements.
View Complete Details

Crystal

We are offering following Crystals 1. Laser Crystalsa) Nd-YVO4 Crystalb) Nd-GdVO4 Crystal c) Ti-Sapphire Crystal d) Yb-YAG Crystale) Nd-YAG Crystal (Rod) 2. Passive crystalsa) Cr4+:YAG Crystal 3. AO and EO Crystala) Fe_LiNbO3 Crystal b) LiNbO3 SAW Crystal 4. Birefringent Crystala) Calcite Crystalb) YVO4 Crystal c) Alpha-BBO Crystal 5. Optical Crystala) Sapphire Crystalb) YAG Crystal Laser Crystals a) Nd-YVO4 Crystal Nd:YVO4 is one of the most efficient laser host crystal currently existing for diode laser-pumped solid-state lasers. Its large stimulated emission cross-section at lasing wavelength, high absorption coefficient and wide absorption bandwidth at pump wavelength, high laser induced damage threshold as well as good physical, optical and mechanical properties make Nd:YV04 an excellent crystal for high power, stable and cost-effective diode pumped solid-state lasers
View Complete Details

Intense Pulsed Light (IPL)Products

IPL Filter IPL filter is the key optical element for IPL (Intense Pulsed Light) machine, which filters the UV wave and reserve the useful wave from 400nm to 1200nm for cosmetic laser, such as photrevujenation, hair removal, vascular and acne treatment. The IPL Filters include IPL Internal Filters and IPL External Filters.
View Complete Details

Solar Cell Quantum Efficiency (QE)

  • Functions Spectral responsively, Internal quantum efficiency, External quantum efficiency, Reflectivity, Transmissivity, Short circuit current density, QE-mapping and Reflectivity-mapping.
The Solar Cell Scan 100 series is a multifunctional experimental platform, which is based on the measurement of Quantum Efficiency (QE). The system employs a turnkey integrated design, which can carry out QE, Reflectivity and Mapping testing functions automatically. There are also modular and custom designed accessories to adapt to different solar cell samples.
View Complete Details

300W Photochemical Catalysis

  • Purity High collimation, high energy output High stability, unstability degree<1° The function of turning off light within certain time High effective air-cooling and long bulb lifetime Accessories: right bracket, filter, fiber holder and so on.
Photocatalysis, industrial catalysis, hydrogen aquatic photolysis, photochemical catalysis, photochemistry synthesis, optical degradation of pollutants, water pollution treatment, biological light, optical detection, various accelerated test simulated sunlight visible, ultraviolet band accelerated test and other research areas
View Complete Details

Carborundum Infrared Light Source

Carborundum Infrared Light Source is combinated light housing LSH-SiN40 and power supplyLSP-T200.It has high Luminous efficiency, small Luminous area, collect easily;do not need water cooling and it is very convenient for application , the life time is 2000hours.
View Complete Details

Dual Light Source System

We are offering following dual light sources 1. LSD30T75 2. LST75SiN40 3. LST75SiC200 4. LST75SiC200LST75SiC20 1. LSD30T75 Deuterium & 75W Tungsten-halogen Dual Light Source System 30W Deuterium & 75W Tungsten-halogen Dual Light Source System(Power Supply Included).It can switch Deuterium & Tungsten-halogen freely. 2. LST75SiN40 Tungsten-halogen Light Source & 200W Carborundum Infrared Dual Light Source System 75W Tungsten-halogen Light Source & 200W Carborundum Infrared Dual Light Source System(Power Supply Included), You need Zolixscan software to drive light source switching.
View Complete Details

Calibration Mercury Light Sources

  • Specification Ignition voltage : 1500V Rated power : 3W Working Current: 10mA Etc.
LHM254 Mercury lamp wavelength calibration light source.LHM254 Mercury lamp is a cold cathode low pressure mercury discharge lamp, it has a large spectrum energy, good stability, small size and so on. Provide high output spectral lines of mercury, such as 253.65nm, 312.57nm, 313.15nm, 313.18nm, 365.02nm, 404.66nm, 435.84nm, 546.07nm, 576.96nm, 579.07nm, ect. Mainly used for wavelength calibration of spectrographs.
View Complete Details

Photocatalysis Special Light Source

LSXS-500 Photocatalysis special light source has 500W Xe Lamp, it will form arc discharge understand High frequency high voltage excitation; Spherical pressure short arc xenon lamp is a small point source with emitting point when ignited radiate strong and stable; From UV to NIR has strong continuous spectrum, VIS is very close to the visible light color daylight, High energy density, stable output; Application: Photolysis of water into hydrogen, photodegradation of pollutants, various types of simulated sunlight visible acceleration experiments, various simulated sunlight ultraviolet accelerated test and other research fields.
View Complete Details

TLS Wavelength Tunable Monochromatic Light Source

TLS wavelength tunable monochromatic light source including LSH series deuterium lamps, tungsten halogen lamp or xenon lamps light source housing, with Omni-series monochromators (Omni-150 or Omni-300), with the filter wheel and other peripheral accessories .
View Complete Details

PIV Nano Camera

The camera with one of the highest quantum efficiency value in the PIV branch is also at the same time the smallest available camera. The small form factor is enabled through the design of the ultra-compact camera head and the integration of digital temperature compensation. The ILA.PIV.Nano camera comes with a 14 bit CCD image sensor, which is specially designed for low light applications in the visible spectral range.In addition to the pocket size dimensions and high-end performances, it also has a low price making it the perfect camera for smaller budgets.
View Complete Details

ND-3800 NANO DOT Microspectrophotometer

  • Purity Full spectrum absorbance analysis! 0.5 -2.0 µL sample size! No cells, no cuvette! No warm-up! Rapid measurement speed! Display the conventration d!irectly! No dilution for samples! Etc
NANO DOT Microspectrophotometer is a full spectrum (200-800 nm) spectrophotometer that is designed to measure concentration of DNA, RNA, protein, cell cultures, microarray samples. The system features CCD detector, a Xenon light source for long lamp life span and user friendly software.
View Complete Details

Battery Chemical

231.73 / Gram Get Latest Price
  • Min. Order (MOQ) 1000 Gram
  • Purity 99.5 % (Ni <0.1%)
  • Packaging Size 10 gram per bottle
  • Packaging Type bottle
  • Grade Standard Technical Grade
  • Physical State Powder
  • Usage/Application Laboratory
  • Size - 1250 mesh (2 mic aps)
  • Item Code 27187
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us