Our Products
Our Complete range of products are Flexural Prism Mould, Triaxial Shear Test Apparatus Mould, Le Chatelier Mould, Prism Mould and Shrinkage Bar Mould.
Flexural Prism Mould : The mould is used for casting specimens of cement/ aggregate. The mould, which has 40mm x 40mm x 160 mm effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate.
For 38dia x 76mm height specimen.
Le-chatlier Mould it includes a small split cylinder forming a mould of 30mm internal dia and which is 30 mm high. Two parallel indicating arms with pointed ends are fixed on either side of the fixed cylinder. The mould is offered with two glass plates and lead weights. Moreover, a set of six moulds is supplied in the cardboard box. Our product is fabricated in compliance with IS: 5514 standard and can be delivered on time.
Set of 6 Moulds in a card Board box.
Prism Mould - The mould is used for casting specimens of cement aggregate combinations for measuring the potential expansive alkali reactivity.
Specifications : The mould, which has 75mm x 75mm x 285 mm effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins.
Shrinkage Bar Mould - The mould is used for casting specimens of cement aggregate combinations for measuring the potential expansive alkali reactivity.
Specifications : The mould, which has 25mm x 25mm x 250 mm effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins.
Vijay Mahajan (Rupson Enterprises)
5608, GROUND FLOOR, BASTI HARPHOOL SINGH, Sadar Bazar, Delhi - 110006
https://www.rupsonenterprises.co.in
Share us via
