Delhi, India GST : 07FEEPS7094H1ZW Verified Supplier
Our Complete range of products are Cement Sampler, Marshall Stability Test Apparatus, Ductility Testing Apparatus and Slum Cone Test Apparatus.
Specifications: This Is A Tube Approximately 53cms Long And 2.8cms I.D. With A Wooden Handle. Total Length Approximately 73cms. The Tube Has The Sharp Angular Edge Which Convinently Pierces Cement Bags. An Air Hole Of Approximately 3mm Dia Is Drilled On The Tube Near Handle.
Marshal test is extensively used in routine test programs for the paving jobs. The stability of the mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 600 °C. The flow is measured as the deformation in units of 0.25 mm between no load and maximum load carried by the specimen during stability test (flow value may also be measured by deformation units of 0.1 mm). This test attempts to get the optimum binder content for the aggregate mix type and traffic intensity. This is the test which helps us to draw Marshall Stability vs. % bitumen.
The slump cone having dimension as (ID-100mm at top ID- 200mm at bottom & length 300mm) is filled with freshly mixed concrete and is tamped with a tamping bar in four layers. The top of the concrete is levelled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.Slump Test Apparatus is with testing rod & base plate.