Stone tile adhesive

Listing ID #4140631

Get Latest Price

Supply Type Manufacturer, Exporter, Supplier

Preferred Buyer From : All over the world

STA (Stone Tile Adhesive) Product Descrption: "MYMIX - STA (Stone Tile Adhesive)" is a polymer modified heavy duty thin-set adhesive for fixing vitrified tiles, natural stones, Marble, granite for....

View More Details

Send Enquiry

Product Details

STA (Stone Tile Adhesive) Product Descrption:

"MYMIX - STA (Stone Tile Adhesive)" is a polymer modified heavy duty thin-set adhesive for fixing vitrified tiles, natural stones, Marble, granite for interior and exterior floor and wall applications as well as building facades. High flexibility
and superior bond strength makes "MYMIX - STA" the best choice for vertical stone cladding.

Application:

Specially for interior floors and walls
Small and medium size tiles fixing
For Internal use and External use

Advantages:

Single component adhesive mixed with water
High bond Strength Suitable for exterior application of various tiles & stones
High flexible adhesive

Non‐Skid adhesive
Water – resistance properties
Long open time with good workability

Suitable Substrates:

Concrete
Cement Plaster
Cement mortar beds
Brick Masonry
Ceramic tile & stone
Cement Terrazzo

Concrete masonry
Gypsum wall board (Interior application)
Suitable for vertical cladding of vitrified tile and stones`

How to Apply:

Planning your layout is essential. Choose your starting point to create a balanced visual appearance. Trowelling should be done horizontally. Spread the adhesive on to the wall, working on small areas at a time. Tiles must be fixed before the surface of the adhesive forms a skin. The tile is then adjusted to its final position with an up & down movement so that full coverage is obtained to the back of the tile.
The size of trowel used should be approximately as mentioned.
Add 25 kg of “MYMIX ‐ STA (Stone Tile Adhesive)” to approx. 6.5 liters. To 7.5 liters. Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture.
After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel
Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints
The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling
New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling.
Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may be filled after minimum 24 hours.

Packing:

25 kg bag and Project Packing of 40 kg bag is available on demand

Colour:

Available in Grey & White

Shelf Life:

Factory sealed bags are best before 12 months from the date of manufacturing
in unopened condition stored in dry area

S.No	Testing Parameter	Specification
1	STA – Mixing Ratio	6.5 to 7.5 litre water for 25 kg Material Approx: 25–30% by weight
2	Product Colour	Grey
3	Workability	Easy mixing and Self curing
4	Application	Better application and easy spreading
5	Open time @23 - 270c	40 – 45 minutes
6	Pot Life	4 hours
7	Setting Time	24 hours
8	Trafficable Time	24 hours
9	Coverage for 3 mm bed thickness	65 – 75 Sq – Ft / per 25 kg bag
10	Shear Adhesion:
A	Dry Condition after 24 hrs	5.0 KN
B	Dry condition after 14 days	21.00 KN
C	Heat Ageing Condition	19.00 KN
D	Wet condition	17.80 KN
11	Tensile Adhesion
A		2200 N
B		2100 N

Company Details

Established at Mumbai in 1963 by Mumbai based Sanghavi family, "Sanghavi Group" is known for innovative concepts, integrity of design and quality workmanship in the field of manufacturing High Quality Products.
It is our strength to have practical knowledge and advantage of combined expertise that encourages us to invent and introduce new products gives us a competitive edge.
"Sanghavi Group" has ventured in to manufacturing of Dry Mix Mortar, Epoxy Products and Construction Chemicals under the brand of "MYMIX". Our products are produced with rigorous technical standards and with modern state - of - art manufacturing facility. We use modern fully automatic PLC controlled European technology to manufacture Dry Mortar in tower plant with latest in house R&D centre, at Kheda, in Gujarat.
"MYMIX" product range of construction chemicals are meant to overcome challenges for various applications in the area of Tiling, Grouting, Waterproofing, Construction Repairs and Industrial Floorings. Every product in this range is ready-to-use with the aim of making construction practice hassle-free and thereby enabling quicker and faster completion of projects.
"MYMIX" a venture of Sanghavi Industries Pvt. Ltd. is professionally managed company and its Directors have in-depth Technical knowledge and are qualified Engineers and technocrats. All its team members are having vast experience and knowledge of Construction chemical industry. "We strive to build, maintain and expand a business which is responsible, strong and attuned to customer needs"