Write a Review
Our Products
We are leaders in the market for providing best range of COLOR STEEL SERIES 840 ROOF FORMING MACHINE, PANEL ROLL FORMER, Roofing Machine, Roofing Sheet Machine and Roofing Sheet Forming Machine
| Lowest price | |
| Best service | |
| Easy operation | |
| Beautiful outlook |
Profile
| Feeding width:1000mm | |
| Effective width:840mm | |
| Material thickness: 0.4-0.8mm |
Process flow
| Decoiling | |
| feeding | |
| forming | |
| cutting | |
| production |
Manual Decoiler
| Material coil inner diameter: 450mm-700mm | |
| Max coil width: 1000mm | |
| Carrying capacity: 5T |
Forming Device
| Number of forming steps: 18 steps | |
| Shaft material: 45 steel with harden treatment, outer diameter 85mm | |
| Roller material: 45steel | |
| Main motor power: 15kw | |
| Forming speed: 8-10m/min | |
| Voltage: 220V/50Hz/3 phrase |
Cutting Device
| hydraulic cutter | |||||||||||||||||||||||||||
| blade, puncher and mold material: Cr12 steel with quenched treated 60-62C | |||||||||||||||||||||||||||
| cutting system: advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor. Controlling Device
Hydraulic
Simple output frame
Packing
Assemble, train the machine
Maintain: It is free to maintain the machine the first year after you buying, include changing the main components. The first year hence, you will pay for our technician $50/day to maintain the machine. And its component is not free, if you need to get it from us. (The buyer should supply airplane ticket and accommodation, if he need maintain). Component and Function:
|
| Low-cost, High-quality | |
| Double Layer Roof Panel Roll Forming Machine | |
| Wall roll forming machine | |
| Roof panel machine |
Profile
| Feeding width:1000mm | |
| Effective width:840mm | |
| Material thickness: 0.4-0.8mm |
Process flow
| Decoiling | |
| feeding | |
| forming | |
| cutting | |
| production |
Manual Decoiler
| Material coil inner diameter: 450mm-700mm | |
| Max coil width: 1000mm | |
| Carrying capacity: 5T |
Forming Device
| Number of forming steps: 18 steps | |
| Shaft material: 45 steel with harden treatment, outer diameter 85mm | |
| Roller material: 45steel | |
| Main motor power: 15kw | |
| Forming speed: 8-10m/min | |
| Voltage: 220V/50Hz/3 phrase |
Cutting Device
| hydraulic cutter | |
| blade, puncher and mold material: Cr12 steel with quenched treated 60-62C | |
| cutting system: advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor. |
Controlling Device
| screen: 5.7 inch Delta screen from Taiwan | |
| PLC: Delta DVP14ES from Taiwan | |
| coder: Delta |
Hydraulic
| Advanced hydraulic system from Taiwan | |
| Power: 11kw |
Simple output frame
| simple frame weld bu 8 U bar, 1 pcs of 3m |
Packing
| Container packing of the line suitable for overseas shipping | |
| The subject can be loaded in one 40 GP container. | |
| Packing style: Naked and covered by plastic film, spare parts and some small parts packed in wooden box. |
Assemble, train the machine
| It is free to assemble and train the machine, but the buyer must pay for the round-trip airplane ticket, and arrange accommodation during that time |
Maintain:
It is free to maintain the machine the first year after you buying, include changing the main components. The first year hence, you will pay for our technician $50/day to maintain the machine. And its component is not free, if you need to get it from us. (The buyer should supply airplane ticket and accommodation, if he need maintain).
Component and Function:
| Sheet guiding equipment: Using guiding equipment of leader sliding block style. The width and the left or right position can be adjusted only by adjusting the leader, then the sliding block can realize left or right movement. | |
| Mainframe Transmission: Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet. | |
| Roll forming system: The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool. |
| ||||||||||||||||
| ||||||||||||||||
| We are specialized in manufacture and design rolling form machine and automatic production lines. The machines are mainly used in the following areas: | ||||||||||||
| ||||||||||||
| Our machines characteristics are high efficiency, high flexibility and low production cost. All of our machines have competitive price and quality. | ||||||||||||
| We will try our best to make and supply you the suitable machine for you accordance with your requirements. We can services for you from the begging to the end. Believe you will be satisfied with our best quality equipment and good sevice. |
| We are specialized in manufacture and design rolling form machine and automatic production lines. The machines are mainly used in the following areas: | ||||||||||||
| ||||||||||||
| Our machines characteristics are high efficiency, high flexibility and low production cost. All of our machines have competitive price and quality. | ||||||||||||
| We will try our best to make and supply you the suitable machine for you accordance with your requirements. We can services for you from the begging to the end. Believe you will be satisfied with our best quality equipment and good sevice. |
| Low-cost, High-quality | |
| Double Layer Roof Panel Roll Forming Machine | |
| Wall roll forming machine | |
| Roof panel machine |
| The Chart of Process flow : Decoiling feeding Rolling Forming Measure length Cut to length Product packaging | |||||||||||||
| The introduction of equipment : Manual decolier, main forming machine, automatic cutter, electric controlling system, hydraulic system, product supporter | |||||||||||||
| Technical specifications Main forming machine | |||||||||||||
|
| We are specialized in manufacture and design rolling form machine and automatic production lines. The machines are mainly used in the following areas: | ||||||||||||
| ||||||||||||
| Our machines characteristics are high efficiency, high flexibility and low production cost. All of our machines have competitive price and quality. | ||||||||||||
| We will try our best to make and supply you the suitable machine for you accordance with your requirements. We can services for you from the begging to the end. Believe you will be satisfied with our best quality equipment and good sevice. |
The steel roofing machine is used to roll form steel roof for peb buildings. The steel roofing machine is controlled by PLC with high accuracy to roll form steel
steel roofing machine, steel sheeting machine, steel roof forming machine. The steel roofing machine consists of one ecoiler, one roll former, and one stacker. The steel roofing machine is used to roll forming the steel sheets into profiled roof for pre-engineering building (PEB). The profiled steel sheets with an enhanced strength can be used for long term roofing system.
The machine design allows for the production of traditional tile panels and fastened tile panels. It produces a profile that has an adjustable depth and an adjustable reveal that gives panels the true appearance of clay tiles. This machine can produce through fastened panels in steel. It is capable of forming two different roof tiles with the same tooling, creating a perfect, scrape-free finish. The colored steel tiles produced by this line look beautiful, elegant and noble. They are widely used as the roof of garden-like factory, hotel, exhibition center, villa, civil construction, etc.
We can manufacture as per customer provided drawings or real objects of sectional materials, customization is welcome. You are welcome to contact with us for the further information!
Roll forming machine consists of uncoiler, coil sheet guiding device, main roll forming system , cutting device, Hydraulic station, PLC control system and support table.
| Material of Main Equipment: |
| Roller Material: High grade No.45 forged steel, with digital-controlled procession, Plated with hard chrome. |
| Active Shaft Material: High grade No.45 carbon wrought steel, which can improve the integrated mechanic feature of theshaft. Shaft diameter is 75mm. |
| Electric Elements: PLC control panel, transducer imported from Mitsubishi of Japan. Other elements from famous suppliers in China |
| Cutter blade: Cr12 mould steel with quenched treatment |
| GI or colored steel | |
| Trapezoidal or corrguated tile drawing | |
| PLC controlled | |
| Two year guarantee | |
| Hydralic system |
| Parameter | ||||||||||||||||||||||||||||||||||
|
Mr. Raju Bhai (SANTKRUPA ROLLING SHUTTER)
Block No.: 561, Plot No.22/23/39/40, Sainath Complex, N.H.:8, Umbhel, Kadodra Char Rasta, Kadodara, Gujarat 395006, Nana Varachha, Surat
Share us via
