Write a Review
Our Product / Services
We are leaders in the market for providing best range of HARES TUBE, CONTROL SYSTEM CONNECTION RENTAL, Light Rental Services, 20mm Density Metal Cube, Flashlamp Bulbs and FLEXIBLE MAGNETIC SQUARES
SKU: GP0950F
Objectives of the experiment :
Built in regulated power supply : +5V/300mA
One side 4mm banana plug connected and other side crocodile clip connected by a length of flexible plastic insulated copper wire. Colour Red, Black.
A horizontal tube 500mm long with a bore of 10mm is constructed near its centre and short side tubes are provided in each section for the attachment of glass manometer tubes 270mm long x 8mm bore. The apparatus is supplied complete with three glass manometer tubes and rubber tubes for connecting manometer tubes.
Consisting of spun copper cylinder contained within a large 75mm dia x 100mm aluminium outer vessel with 10mm of insulating material between. Supplied with wooden cover for outer vessel with bung for mounting thermometer support clip.
Used in charging and discharging of a capacitor. C.P. brass strips and pillars. Three terminals fitted on a thick bakelite plate of high insulation. Contact Resistance: 2 Milli-ohms approx. Maximum current: 5 Amps.
A brass C.P. Spring arm with press knob and two brass terminals. All mounted on bakelite base 80 x 55mm.
Density Metal Cube 20mm, Aluminium
SKU: GP0108A
Aluminium cube 20mm side for investigating density.
In this kit various materials such as springs, rubber blocks, wire, rubber cord, tube etc., are provided for class experiments to explore elasticity by performing experiments on compression, torsion, extension and elastic limits. The standard pack is one-quarter class kit, i.e. sufficient for eight students and contains:
25 expendable steel springs.
2 wide steel springs 114 x 75mm diameter.
2 soft latex foam blocks.
1 50g reels of 32 s.w.g. Bare copper wire.
2 50g reels of 26 s.w.g. Bare copper wire.
1 length valve rubber tubing.
4 elastic cords with eyelets.
4 soft erasers for twisting.
Comprises 8 anisotropic alloy magnets, 8 anisotropic ceramic ferrite magnets, 4 steel magnet-yokes, 6 plotting compasses, 4 hardboard formers for compasses, 1 bottle iron filings, 4 iron filing dispensers, 4 each double C-cores, Clip for C-cores, aluminium rings, split aluminium rings, 4 each support bases, armatures with axle tubes, aluminium axle-rods, 8 split pins, 16 rivets, 1 length latex rubber tubing, 4 each formers for coils, reels cellulose tape, reels copper wire, 4 each sheets white pasteboard, plain postcards, reels white cotton, 4 each carbon resistors 100 ohms 10 ohms, 10 flash lamp bulbs, 5 neon bulbs, 8 MES bulb holder, wood clamp and wood block.
With M.E.S cap, suitable for flashlamps, spotlights and panel lamps, etc. Supplied in pack of ten.
For constructing histograms, bar charts etc on magnetic boards. A squares of magnetic rubber sheet 50x50mm
Colours: Red, Yellow, Green, Blue, Black and White.
Made of all glass, working with visible coloured glass valves, overall size 350 x 100mm height x width, mounted on wooden stand 400mm high x 150mm wide approx. With plastic trough.
In metal frame 100x75mm with a central aperture 63mm dia. Mounted on a 6mm brass rod giving an optical centre height of 80mm approx. Overall 130mm height.
Unmounted glass tube, limbs 600mm long x 10mm dia, with a third short limb for connecting a suction tube.
Comprises two basins 100mm diameter and shaped glass tubes. The upper platform has a 38mm diameter hole to allow use as a simple recirculation system with a single reservoir.
Dimensions of laminated wooden base 115 x 105mm.
Provide a substantially uniform field the center space. Each coil has a moulded plastic former 152 mm diameter with 320 turns of 22 swg enameled wire giving a mean diameter of 136 mm. The rod has a sliding boss which locks into the tapered hole in the Universal Stand. Dimension of coil and support rod 305 x 152 x 25 mm. Supplied with instructions.
A general purpose experimental and prototyping breadboard module suitable for use with digital or liner devices and circuity. Comprises two 16-pin, two 18 pin and one 40-pin DIL sockets. The versatility of this unit is enhanced by the inclusion on the board of logic indicators, a two-speed clock, a manual pulsar and logic input switches.
A metal screen 75mm dia, with an adjustable iris diaphragm mounted in the centre, giving a maximum aperture of 6mm. The disc is mounted on a 6mm brass rod and the optical centre height is 80mm approx.
We can offer all kinds of rental use LED screen: indoor stage rental LED screen, outdoor events rental LED display screen.
For the rental use LED screen: flight case, luck button & hanging structure is always necessary since the screen needs to move from one site to another very frequently and only use several days for each event.
Gurjot Kalra (sarb overseas)
Jalandhar cantt, Jalandhar Cantt., Punjab - 144001, India
Share us via
