SASKIA INDUSTRIES

Ajmer, Rajasthan

SASKIA Hair Belt is a traditional flat drive belt used to transmit power from electric motors or diesel engines to stone mills, corn mills, and rice machinery with smooth, slipresistant engagement. Built from hightensile leather with hairside friction or cotton canvas/rubberized fabric, the belt runs cool on crowned pulleys, reduces vibration, and protects bearings by absorbing shock loads; supplied openended by length with belt lacings or as endless loops on request.

Key features

• Highfriction hairside surface for reliable grip on castiron/crowned pulleys.
• Shockabsorbing, lowvibration power transmission; smooth startups and speed stability.
• Works with vertical/horizontal stone mills, corn mills (1A/2A/11A), rice hullers/polishers, and lineshafts.
• Available as openended with lacing or endless; cuttolength service.

Specifications

• Construction options:
• Hairside leather belt (single or doubleply)
• Cotton canvas/rubberized fabric belt (industrial grade)
• Standard widths: 2" / 2.5" / 3" / 4" (50 / 65 / 75 / 100 mm); custom on request
• Thickness: 48 mm by ply and material
• Length: As per center distance; supplied by meter or finished loop
• Jointing: Mechanical lacing (alligator/clipper) or adhesive skive joint (for endless)
• Recommended pulleys: Crowned CI/steel; typical mill setup 12" 4" with 700900 RPM band
• Direction: Hairside to pulley for leather type
• Operating conditions: Dry, clean, aligned drive; belt tension set to avoid slip/overload
• Applications: Stone flour mills, emery stone drives, corn/maize grinders, rice huller/polisher drives, lineshaft workshops
• Country of Origin: India

SASKIA Endsuction centrifugal pump for highvolume water transfer and utility service in agroprocessing plants, mills, and industrial lines. With 100 100 mm suction/delivery, the pump delivers a duty point of 18 m head at 25 LPS with 73% efficiency at 1450 RPM, covering a working head range of 1420 m; recommended prime mover rating is 8.8 kW, and the CI hydraulic set with balanced impeller ensures smooth, lowvibration operation.

Key features

• 100 100 mm ports; endsuction configuration; 1450 RPM operation.
• Duty point: 18 m head at 25 LPS; efficiency 73%; head range 1420 m.
• Recommended prime mover: 8.8 kW (approx. 12 HP) with TEFC motor.
• Castiron casing and volute; dynamically balanced impeller; mechanical seal.
• Suitable for clean water transfer, washdown, cooling, and mill utilities.

Specifications

• Size (Suction Delivery): 100 mm 100 mm
• Speed: 1450 RPM
• Head Range: 1420 m
• Duty Point (Best Efficiency): Head 18 m, Discharge 25 LPS ( 1500 LPM)
• Efficiency (BEP): 73%
• Recommended Prime Mover: 8.8 kW ( 12 HP), 3phase 415 V, 50 Hz
• Casing/Volute: Cast iron Impeller: CI (balanced) Shaft: SS
• Seal: Mechanical seal Bearings: Heavyduty, greaselubricated
• Liquid: Clean water/light process water, 060C
• Rotation: CW (viewed from motor fan end)
• Country of Origin: India

Handoperated centrifugal blower for forges, bhatti ovens, barbecues, and general airflow where electricity isnt available; crank handle drives an internal impeller to deliver focused air through a metal outlet tube.

Key features:

• Cast alloy/steel housing with crank handle, steel impeller, and metal outlet nozzle for durable field use.
• Adjustable outlet direction and base mounting plate; simple, toolfree operation and maintenance.

Specifications:

• Drive: Manual hand crank with gear reduction.
• Construction: Cast metal body, pressed steel impeller, plated outlet tube, powdercoated finish.
• Airflow range: Typically 60180 CFM for small to mid sizes; continuous duty by manual operation.
• Use cases: Blacksmithing forge air, coal/wood stoves, grills, onsite ventilation/embers control.

Note:

• Keep fingers clear of inlet while cranking; avoid ash ingestion by using a simple mesh guard.
• Light oil on crank bearings periodically; do not spray water into housing after hot use.