Scorpio Engineering BMH Pvt. Ltd.

Cox Town, Bangalore, Karnataka

Scorpios F.I.B.C. (Flexible Intermediate Bulk Containers) FILLERS and UNLOADERS are completely self-contained units that come in a ready-to-use condition. All you have to do is provide a one-point power and compressed air supply! Our Unloading machines have special built-in sequentially operated massager units that gently push the material out of the bag discharge opening. Our Big Bag Fillers can automatically fill big bags to correct weights using bag inflation and high speed filling sequences with integral load cell systems.

• Bag size handled: 90 cm x 90cm x 120cm. (Contact for other sizes)
• No. of Loops: 4 Nos.
• Discharge type: Bottom spout. (By untieing the draw string provided)
• Bag massagers: Optional.
• Monorail & Hoist: Optional
• Discharge Screw or Rotary Airlock: Optional
• Hopper holding capacity: 1000 lit.
• MOC: MS construction / SS304 contact parts
• Control Voltage: 24V DC / 110V AC / 220V AC
• Dust collector: In-built.
• Connected Power: 2.2 kW approx.
• Filter Cleaning: Sequential reverse pulse jet cleaning mechanism

Scorpios Open Truck Unloader is a mobile bulk material unloading unit designed for unloading dry bulk materials from standard open trucks. Many materials which are low in cost cannot be transported in bags and are often transported loose in bulk in standard open trucks. The unloading of this loose material after the truck reaches the destination is now done manually creating major dust and health problems. The OTU is designed to eliminate such manual unloading The unit consists of a hydraulically articulated 3-arm boom with a suction nozzle and suction pipe attached to it. This boom will enter the truck from the rear and is operated by a radio remote controlled hand held pendant unit

The bulk material is sucked out through the suction nozzle / pipe into a filter receiver where the bulk material and conveying air get separated. The air exits through a built-in automatically cleaned reverse jet filter unit to the suction port of a special type Roots Blower. The collected bulk material in the filter receiver drops to a conveying pipe below through a Rotary Valve. This conveying pipe receives motive-conveying air from a different Roots blower meant only for the discharge operation. The bulk material which falls into the conveying piping from the 2 Nos. Rotary Valves of the primary cyclone and filter is conveyed to the customer silo pneumatically by this blower. The customer silo should have a suitable filter on top.

• Suction nozzle: Hydraulically / Electrically driven Stirrer assembly.
• Application: Powdered material
• Power: Self driven / External
• MOC: MS construction / SS304 contact parts
• Paint: Synthetic enamel paint - 100 DFT. (Optional: Epoxy paint)