We offer a wide range of Electric Wire Rope Hoist which has superior design and are easy to operate and maintain. These machines are in generally in accordance with IS 3938. Their modular design offers direct fits between components. We even offer the clients assistance in designing and installing monorail structure with supports which ensures a safe, smooth and economical material handling. All the components of the Electric Wire Rope Hoist like wire rope, motor, brake and limit switches are of reputed makes. Details

• Sturdy cylindrical rotor pole-changing Motors with elegant continuous cast aluminium sections, integrated safety brakes. Insulation class - F, Protection- IP54. Designed specifically for high starting torque hoisting service, half-hour rated with permanently lubricated bearings suitable for frequent reversals as well as braking
• Single or Dual-disc electromagnetic DC brakes having automatic braking on power failure. Environmentally sound brake linings designed for approx. I million braking operations offer long maintenance intervals
• Modular designed Electrical Panel has a very wide operating range. The panels are designed for easy installation, maintenance and reliability, with, fuse less circuitry. Each drive group has a motor overload protection device which provides effective protection against inadmissible overloading. Control circuit provides reduced voltage at the Push Button station, with 110 volts being standard. Also, a relay is provided to prevent phase failure and phase sequence change at the incoming.
• Accurate flat helical or spur gear units with case-hardened gears, high-grade surface treatment and permanent oil or grease lubrication. Designs that are newer are lighter in weight because of improved material strength and manufacturing techniques
• The trolleys offered are push pull, hand geared or electrically operated type.
• Additionally, articulated joints ensure that all four wheels are always firmly positioned on the tracks and that the wheel loads are properly distributed in accordance with the structural design of the system
• Every component and part is efficiently scrubbed and painted with two coats of primer before assembly and two coats of synthetic enamel or automotive paint after testing

Special Details

• Push Button Stations are light and easy to operate, weather proof, giving sure grip and one handed control. The Station has built in steel strain relief, permits pulling of unloaded hoist along track. Rocker switches in certain designs
• Limit Switches prevent over hoisting and over lowering of hook. Positive action limit switch will prevent over travel beyond set limits in either direction. They are optional if desired for CT and LT

Optional Features

• Two speeds for all drives
• Articulated trolley for curved track

Range

• Capacity : 0.5 Tons Onwards
• Lift : 3 Mtr to 18 Mtr.

We offer a wide range of Electric Wire Rope Hoist which has superior design and are easy to operate and maintain. These machines are in generally in accordance with IS 3938. Their modular design offers direct fits between components. We even offer the clients assistance in designing and installing monorail structure with supports which ensures a safe, smooth and economical material handling. All the components of the Electric Wire Rope Hoist like wire rope, motor, brake and limit switches are of reputed makes. Details

• Sturdy cylindrical rotor pole-changing Motors with elegant continuous cast aluminium sections, integrated safety brakes. Insulation class - F, Protection- IP54. Designed specifically for high starting torque hoisting service, half-hour rated with permanently lubricated bearings suitable for frequent reversals as well as braking
• Single or Dual-disc electromagnetic DC brakes having automatic braking on power failure. Environmentally sound brake linings designed for approx. I million braking operations offer long maintenance intervals
• Modular designed Electrical Panel has a very wide operating range. The panels are designed for easy installation, maintenance and reliability, with, fuse less circuitry. Each drive group has a motor overload protection device which provides effective protection against inadmissible overloading. Control circuit provides reduced voltage at the Push Button station, with 110 volts being standard. Also, a relay is provided to prevent phase failure and phase sequence change at the incoming.
• Accurate flat helical or spur gear units with case-hardened gears, high-grade surface treatment and permanent oil or grease lubrication. Designs that are newer are lighter in weight because of improved material strength and manufacturing techniques
• The trolleys offered are push pull, hand geared or electrically operated type.
• Additionally, articulated joints ensure that all four wheels are always firmly positioned on the tracks and that the wheel loads are properly distributed in accordance with the structural design of the system
• Every component and part is efficiently scrubbed and painted with two coats of primer before assembly and two coats of synthetic enamel or automotive paint after testing

Special Details

• Push Button Stations are light and easy to operate, weather proof, giving sure grip and one handed control. The Station has built in steel strain relief, permits pulling of unloaded hoist along track. Rocker switches in certain designs
• Limit Switches prevent over hoisting and over lowering of hook. Positive action limit switch will prevent over travel beyond set limits in either direction. They are optional if desired for CT and LT

Optional Features

• Two speeds for all drives
• Articulated trolley for curved track

Range

• Capacity : 0.5 Tons Onwards
• Lift : 3 Mtr to 18 Mtr.