Our Products #1585370

Precious earths, exclusively selected for their luxurious silky texture and gentle quality, are layered with mineral pigments in this lightweight powder to mimic the true color of tanned skin. Unique technology with inalterable earths ensures exquisite wear all day. Mineral blend smoothes complexion, while Aloe Vera helps protect skin from dryness.

MODEL NO.WPS712DN

SUPPORT CUSTOM-MADE, accessories changeable.

Product features:

1 Camera: 50mm diameter size. 30 pcs Leds

Waterproof sapphire lens. Stainless housing.

2 Monitor: 7 inch big& cool monitor.

High-definition:720 X 576

SD card icon and SD capacity osd.

3 DVR: Video & audio record.

Leds of camera adjustable. Power light flash before power off in case of video lost.

4 Battery work time: 260minutes.

5 ABS case: anti-throw, good impact resistance, longer service life.

6 Skids: support the camera in the middle of pipe.

Packing list:

1 50mm camera

2 60-180m cable

3 7 inch Monitor

4 DVR

5 Li-on Battery

6 Charger

7 Three Skids

8 ABS Case

Specification:

Construction:
Fibreglass / cast casing for ruggeduse.

Firing Capabilities:50 detonators at 100 m

Power Source:Rechargeable SMF Battery
LED status indicators:
Full Charge, Ready Battery Status and
Line continuity indicator
Capacitor discharge:instant

Galvanometer:Digital

Working Temperature: 45 C to +50 C.

Protection:Impact & water

Number of firings:600 at 20 C per battery

Priming time:3 seconds approx.

Safety features:To avoiding accidental fire

Power output:550 Ohms.

Note:1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

• Model: STS Radiance Microcare

A police shield which is also referred to as anti-riot shield isan important equipment which is commonly used by police orlaw enforcement officers. They protect the officers againststone pelting or brick batting.This enables the officers tocontrol riots without getting injured. They are available in awide range of sizes and shapes which brings about thevariation in prices. A good police shield should be able towithstand high amount of impact while still enabling the officers to have a full view of their main target; the riot ofcrowd they are trying to control. The most common types ofanti-riot police shield is the poly-carbonate police shields.

These items are manufactured from poly-carbonates due tothe wide range of benefits these materials have to offer.

Technical Specifications :-

Features:
Designed for complete protectionagainst brick batting, stone pelting, ironrod/cane Attack, molotov cocktails, acids.
Raw material: Engineering gradePoly-carbonate.
Shape: Rectangular
Edges well secured and covered bydurable band/elbows.
Thick ribs all along the edges for higherstructural strength.
Improved consistency in thickness andenhanced strength.
Cushioned arm rest to provide comfortin long use
Vision area of shield so shaped as toavoid scratches during handling.
Light wt, scratch proof, durable andtransparent.
High impact resistance.

Specifications:

Portable Door Frame Metal Detector: We offer an exclusive range of Door Frame
Metal Detectors. Door Frame Metal Detector is useful in security checks for persons in
the entrance gates. These are manufactured using extreme grade of raw material and
equipment.

Search Zone: Search Coil Enclosed in Collapsible rigid PVC pipe telescope rigid PVTpipe optional.
Control Unit: Micro-controller based control unit with advance features.
Display: 4 line x 20 characters LCD display module displays with variousparameters
Settings: Automatic through micro-controller with any operator interface.
Sensitivity: MS. 80 x 55 x 20 mm AT Level 3
Detection indication:
Variable pitch audio through micro controller with mute facility.
Bar graph on LCD display
3 LEDs for large visual indication.
Optical Sensor: Will facilitate detection of metal only when a person passes through sensitivity zone. Avoid detection of metal movement outside detection zone usingsingle sided sensor and single connector for sensor as well as coil.
Counters: Counting of number of persons passing the sensing zone and number ofdetection for reference and analysis by supervisor.
Principle of Detection: EDDY current based energy absorption.
Sensitivity setting: User selectable 9 level setting.
Indications: LED bargraph on display 3 LED for large visual indication.
Power with charger: 230 V maintenance free battery.
Environmental conditions: 10 to 50 C
RS-232-Interface: For downloading the date with PC (Optional)
Dimensions: Search Coil - 900 x 1900 mm Approx.

Note:
1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

• Model: STS - PDSZ 04

Poly-carbonate Lathi is designed & developed using latesttechnology. We are engaged in manufacturing andsupplying Poly-carbonate Lathis that are used across thecountry for riot control purposes. These lathis aremanufactured using thermoplastic polymers, also known
as poly-carbonate.

Features & Technical Specifications :-
Features:
Raw Material: Engineering gradepoly-carbonate.
Ultra strong & light weight
Effective deterrent
High impact resistance
Long shelf life

Additional Features:
Hand grip is designed for extralength grip
End cap has thick ribs at the end forhigher structural strength.
Wrist band on the top of hand grip isprovided to enable proper security ofthe lathi.
Easy to hold and control the mob

Specifications:
Total Length: 1000 mm + 20 mm
Handgrip : 1500 mm long with Nylonrope
End Cap : 100 mm (Plain)
Diameter : 25 mm + 2 mm
Thickness : 3 mm + 0.5 mm
Raw material: Engineering gradepoly-carbonate.
Weight : 300 gms + 10 gms
Wrist Band Length: 200 mm + 5 mm
Colour : Transparent / Khaki

Note:1. Specifications may change as per customer requirement2. Images Shown are for indicative purpose only, Actual product may differ.

• Availability: In Stock
• Model: STS-PCL 01

Protection area 0.40 square meters to 0.60 square meter.Weight 4.5 kg to 6.3 KGBallistic protection Bullet type .22 calibres, .380 ACP FMJ, 357 mag JSP, 9mm Fmj, 44 mag, 7.62X39mm (msc AK-47), 7.62x51mm NATO BallFMJ and 7.62x54mm Dragunov.Back space signature (BSF) maximum 25 mm.

Note:1. Specifications may change as per customer requirements2. Images Shown are for indicative purpose only, Actual product may differ

• Availability: 1
• Model: Level - III

If your premises are worth securing, its worth looking into under vehicleSurveillance Systems.Our UVSS solutions are designed to scan, monitor, and digitally record crisp, clearvideo images of the entire width of a vehicles undersides all with one permanent orportable system.Its an ideal solution for governmental, military, corporate, and transportationfacilities wherever complete vehiclemonitoring is required.The flexibility of the UVSS allows it to be configured to meet your securityinspection the UVSS can be as simple as a camera connected directly to monitors formonitoring and PC-based recording/monitoring can be combined, which also makesit easy to network the security system.


Features:Designed for rugged terrain, harshenvironment, temperatureWaterproof camera and lightsANPR (Automatic License PlateRecognition) and image cameracompatibleOpen architectures for easyintegration with CCTV systemVideo can be transmitted on IP, wireless, fibre or standard coaxialCablesStandard systems come with flatpanel LCD display Above-surfaceCamera/lighting mounting: no majorconstruction requiredHigh-resolution long-life colourvision systemLEDs provide bright white, high intensitylight, providing daytimesimulation light for undercarriageilluminationLEDs are rated for 100, 000 operatinghoursEasy, hose-down cleaning of cameraand LEDsAll cabling and power accessories arestandard with all systemsPermanent or portable solutionAll steel ramp with 40-ton capacityfor heavy-duty performanceScans vehicles of all length andbreadthScans underside of moving vehicles(up to a speed of 30 Kmph) and Produces a high quality image, inreal-time.
Benefits:Efficient viewing is possibleFacilitates detection of explosives, bombs, contraband objects.Facilitates peak-hour inspectionwithout stopping any vehicles.Very high through-put saves timewhile maintaining high standards.Highly detailed viewing is possible incase of suspicion.Is a crucial time & life saver.Easier to navigate. Ensure betterusage of the systems.Multi level and Multi locationmonitoring and reporting is possible.Ease of abnormality detection due toa reference point.Crucial aid in post event analysisProvides one stop solution for allsecurity needsAn idea & convenient security aid forcrucial & large events such as highprofile exhibitions and rallies.

Technical Specifications

Main CameraSensor Type : Area ScanResolution : 1294 pixels x 964 pixelsVideo Format : GigeDimension : 42 mm (W) x 29mm (H) x 29mm (L)Power Supply : 12V to 24V

License Plate CameraSensor Type : Stainless steel casing with weather proof casingResolution : 1.8 mtrs x 1 MtrsMaximum Scan Speed : 30 Kms/hour

MechanicalMaterial : Stainless steel casing with weather proof casingDimension : 1.8 mtrs x 1 MtMaximum Scan Speed : 20 Kms/hour

Processing UnitProcessor : Intel Xeon i7RAM : 16 GB DDRHard Drive : 1 TBGraphic Card : 2 GB NVIDIAPCI slots : 3 PCI slotsMonitor : LCD / LEDConnectivity : 1Gi ga LAN

Sensor TypeType : Induction Loop SensorPower : 12 VDCOutput : 1 TBLightening UnitHalogens/CFl/LED : 12V

Note:
1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

• Availability: 1
• Model: STS-UVSS 01

Technical Specifications:
Material - Cloth Jackets of fire retardant drill
Colour - Black
Weight with packing: 5.755 Kgs
Size - Small/Large/Extra Large

Properties:
Physical protection against brick batting cane/knife/acid attacks, Molotov cocktails and projectiles encountered in Riot situation and other policing functions.
Special fire retardant, high impact resistance rubber inserts
Protective sheets for front and back pouches with trauma pads
Sweat absorbing mesh fabric (detachable & washable) in-lined elbow and shin guards ergonomically formed to protect limbs during riot/mob situation
Impact attenuation (reduction) above 80%
Ergonomic design for maximum wearing comfort.
Design ensures restraint free movement long shelf life, light wt. with Excellent protection capability

The body protector consists of various parts:
1. A) Chest Protector : 40 Cms
Up to 4.5mm + 10% thick poly foam.
Inner lining made of mesh fabric (Detachable & washable) with sweat absorbing lining 2mm + 10% thick foam with specified (16-22) shore A hardness
Weight less that 3.00 kgs
Material High Quality unbreakable engineered plastic for front and back pouches with trauma pads
High impact resistant rubber inserts to absorb trauma.
All sandwiches padding of soft plastic withEVA (Ethylene and vinyl Acetylene basedpolymer) foam or any other technicallybetter test proven material should havenumber of small holes for free movement ofair.
Inter stitch able so as to remain in place andnot slip.
B) Shoulder Pad : 40 Cms
Velcro fixed.
High protection engineered soft plastic orany other NABL proven superior material
with a unique flexible design for optimummovement, fit and comfort.
Poly foam (preferably 3mm thickness) withspecified (35-40) Shore a hardness and
black mesh fabric that covers the chest andback.
High protection engineered soft plastic withshock absorbing EVA poly foam cushioningthe shoulder.
Inner lining made of mesh sweat absorbingfabric (detachable & washable)
Inter stitch able so as to remain in place andnot slip.
All sandwiches padding of soft plastic withEVA (Ethylene and Vinyl Acetylene based (polymer)( foam or any other technicallybetter test proven material, should havenumber of small holes for free movement ofair.2. Elbow Pad: Length 36cms

Made of soft engineered plastic
Velcro closure
EVA (Ethylene and vinyl Acetylene basedpolymer) Poly foam of minimum specifiedhardness. Engineered plastic with mattsurface of 2.5mm + 10% thickness.
Mesh fabric poly foam of up to 4mm + 10%specified hardness.
Should be able to withstand impact fromone meter on hard surface
Inter stitchable so as to remain in place andnot slip
All sandwiches padding of soft plastic withEVA (Ethylene and vinyl Acetylene based
(polymer) foam technically better testproven material with number of small holesfor free movement of air.
The fabric should be detachable &washable.

3. Shin Guard: 58 Cms

Made of soft engineered plastic or any otherNABL proven superior material.
Elastic striped for easy wearing.
Velcro closure
Sweat absorbing mesh fabric Poly foam10mm + 10% hardness.
Inter switchable so as to remain in placeand not slip
All sandwiches padding of soft plastic with EVA (Ethylene and Vinyl Acetylene based polymer) with number of small holes for free movement of air.
The Fabric should be detachable &washable

Upper Arm:

High protection engineered soft plastic or any other NABL proven superior material with sweat absorbing mesh fabric (Detachable & Washable) inner protection with a unique flexible design for optimum movement, fit and comfort suitable to human body parts shape.

Velcro fixed.

Inter stitch able so as to remain in place and not slip

All sandwiches padding of soft plastic with EVA (Ethylene and Vinyl Acetylene based polymer) with number of small holes for free movement of air.

High protection engineered soft plastic outer shell or any other NABL proven superior material should provide flexibility required for forearm and elbow.

Shock absorbing poly foam with minimum specified (Maximum 5mm) thickness and black mesh (detachable & washable fabric) lining which offers comfort and breath ability.

Adjustable straps fastening with durable elastic and Velcro.

High protection engineered soft plastic of minimum specified standard thickness (Preferably 2.5-3.5mm) so that it does not lose its flexibility with higher padding or any other NABL proven superior material.

Inter stitch able so as to remain in place and not slip.

All sandwiches padding of soft plastic with EVA (Ethylene and Vinyl Acetylene based polymer)( foam or any other technically better test proven material, should have number of small holes for free movement of air

Groin:

Section has an outer shock absorbing sweat absorbing mesh fabric (detachable &washable ) padding (plastic/EVA/poly foam) along with hard shell cap
The protection attachment should cover the groin area from all ricocheted projectiles and allow a comfortable sitting.
Inter stichable so as to remain in place and not slip.
All sandwiches padding of soft plastic with EVA (Ethylene and Vinyl Acetylene based polymer)( foam or any other technically better test proven material, should have number of small holes for free movement of air.

Thigh Guard: 44 Cms

Thigh guard is supported by kamarbandh to avoid slippage while running and during movement.
High protection engineered unbreakable plastic of 2.5 to 04mm thickness on thigh section
EVA (Ethylene and Vinyl Acetylene based polymer) foam or any other technically better test proven material with minimum 4.5 mm thickness and mesh lining (detachable &washable fabric) for comfort and breathability.
Adjustable straps. Fastening with durable elastic and Velcro.
Length 146.5+ 10%
Inter stitch able so as to remain in place and not slip. A fire retardant drill cloth (detachable & washable fabric) jacket with fire retardant and polycarbonate inserts in front and back pouches. Two shin guards having high resistant unbreakable plastic inserts.
All sandwiches padding of soft plastic with EVA (Ethylene and Vinyl Acetylene based polymer)( foam or any other technically better test proven material, should have number of small holes for free movement of air.
Carrying bag for easy handling:

• Availability: 1
• Model: STS- FBP 01

Remote Operated Wire Cutter is an essential tool to cutwires of / Explosives, Improvised ExplosiveDevices (IEDs), Explosive Ordinance Devices (EODs), Radio-Controlled IEDs (RCIEDs) etc. without endangeringlife. The remote operated wire cutter ensures the safety ofTechnicians from any accidental explosion. Theseare manufactured using extreme grade of raw materialand equipment.
Technical Specifications :
It is designed to cut electric wire up todistance of minimum 100 meters throughremote Operation both cordless and corded.

Provided with a pole stand for mountingmotor with wire cutter.
Height of the pole stands is from 3inch to 2 meter.
Suitable clamp is provided in thesystem to allow adjustment of theheight to the desired
Level.
The clamp is provided with suitablearm/lever for fastening/unfasteningthe clamp.
The clamp with lever is so designedso as to allow adjustment of heightof the motor with
wirecutter on thepole stand without using of tools.
The arm/lever of the clamp isprovided with suitable grip for easeof operation by hand.
The base of the pole stand, pole, clamp, fastening / unfastening clamp/ lever, nuts used in the system arerustproof.
Cordless Operation:
The equipment is able to functioncordless for which it is providedwith a cordless remote for
its remoteoperation up to distance ofminimum 100 mtrs.
The remote works on commerciallyavailable rechargeable cells.
Corded Operation:
Besides using remote control, theequipment also able to functionthrough wired connectivity
from adistance of minimum 100 meters.

Wire Cutter:
The jaw of the cutter can be easilyopen up to an angle of 45 degree.
The wire cutter can cut wire withmax overall diameter of 5mmincluding the sheath.
The motor of the wire cutterfunctions on commercially availablestandard 12V rechargeable
lead acidsealed maintenance free battery.
Operating Temperature:
-10 to +50 C
Weight:
The complete weight of theequipment with standardaccessories along with the pelicancase is approx. 30 Kgs.
The weight of the additionalaccessories along with the pelicancase is approx. 10 Kgs.

Carrying Cases:
Light weight, water resistant for safestorage and transportation ofcomplete equipment
including theaccessories.
The carrying cases provided withroller wheels and suitable handle fortransportation akin to a stroller.
The main equipment with standardaccessories will be provided in onepelican case and the
additionalaccessories will be provided in aseparate pelican case.

Standard Accessories:
Remote Control 01 Nos.
Commercially available rechargeablecells for the remote control - 01 sets.
Battery charger for charging cells ofthe remote control 01 Nos.
Commercially available standard12V rechargeable lead acid sealedmaintenance free battery foroperation of motor of wire cutter -01 Nos.
Spool of 100-meter wire 01 Nos.
All types of wire with connectorrequired for functioning of theequipment User handbook /technical manual.

Additional Accessories:
Commercially available rechargeablecells for the remote control - 01 sets
Commercially available standard12 V Rechargeable lead acid sealedmaintenance free battery foroperation of motor wire cutter - 01Nos.
Charger for standard 12Vrechargeable lead acid sealedmaintenance free battery.

Note:1. Specifications may change as per customer requirements2. Images Shown are for indicative purpose only, Actual product may differ

• Availability: 1
• Model: STS- ROWC 01

Protection area 0.38 square meters to 0.60 square meter.

Weight 2 kg to 2.8 kg.
Ballistic protection Bullet type .22 calibres, .380 ACP FMJ, 357 mag JSP, 9mm Fmj and 44 mag.
Back space signature (BSF) maximum 25 mm


Note:1. Specifications may change as per customer requirements2. Images Shown are for indicative purpose only, Actual product may differ

• Availability: 1

Hook & Line sets provide essential semi-remote handling capabilities for technicians. The two-line comprehensive kit provides advance capabilities to allow users to attach, redirect, reach and manoeuvre suspect EOD/EDD devices.

Technical SpecificationsSpecification:
High strength, low stretch, colour-coded Kevlar core lines.
Lockable, self-opening pulleys.
High strength, laser cut, stainless steel hooks.
Rigid carrying case with foam to accommodate the tools.

Items:Reel 300 mm Dia with handle and should hold the line provided with Kit: 2 Nos.Line 5.5 Mm dia Length 150 m: 2 Nos.Pulling Handle: 2 Nos.HooksA. Single Plain 12 mm: 2 Nos.B. Single Plain 25 mm: 2 Nos.C. Single Plain 50 mm: 2 Nos.D. Double Plain 25 mm: 2 Nos.E. Double Plain 50 mm: 2 Nos.F. Single Bared 12 mm: 2 Nos.G. Single Bared 25 mm: 2 Nos.H. Single Bared 50 mm: 2 Nos.I. Double Bared 12 mm: 2 Nos.J. Double Bared 50 mm: 2 Nos.K. Spring Gate Hook: 1 No.L. Self Locking Hook: 1 No.

Rod Extension 3 Mtr:1 No.
Belt Sling
A.7.5 Cm: 1 No.B. 10 Cm : 1 No.Snatch Block self Opening 4 Nos.Karabiners:A.12 mm: 2 Nos.B. 18 mm: 2 Nos.C. 25 mm: 2 Nos.Piton
A. 50 mm: 6 Nos.B. 100 mm: 6 Nos.Self adhesive anchor: 10 Nos.Suction Pad - Single and Double
A. Single: 2 Nos.
B.Double: 1 No.Telescopic Pole with self locking hook:1 No.
GripsA. Spring Max opening of 25 mm: 1 No.B. Vice jaw grip: 1 No.

Note:1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

• Availability: 1

Alcohol Breath Analyzer, ALCO test is the most popular & most selling device to measure alcohol in the human breath. This device is based on micro controller with most stable semiconductor sensor, memory can recall the last 20 test results. The device have 4 digits LCD digital display with status and back light and audible Sound alarm if above the set level. Main Features 1. Digital display with black back light. 2. Range: 0.000-0.199% BAC or 0.000-1.990 BAC / 0.000-0.995 mg/L 3. Use Mouthpiece. 4. LED display. 5. Size : 1259524mm

• Availability: 100
• Model: STS-BA-02

Alcohol Breath Analyzeris the most common method of testing for blood-alcohol content in use today. Securatech breath analyzers estimate the concentration of alcohol in the body by measuring the amount of alcohol ex-hauled from the lungs. The hand held analyzers have digital display, these are easy to use and provide accurate readings. The device can also be connected to the computer for logging data and a compact sized printer to print out the details of alcohol concentration, date and time. Now a days, Alcohol Breath analyzers are widely used by Traffic Police, Industries, Railways, Airports & Airlines, Military, Factories & Offices, Hotels & Restaurants, BPOs, MNCs, Security companies, Bus & Taxi operators, Educational institutions, laboratory, Personal etc. We offer a wide range of alcohol breath analyzers as per your requirements.1. Quick and precise analysis: Ensure a high sensitivity to alcohol and stable & reliable working life. 2. Easy to read: Waveform graphic display and make the analyzer more fancy and clear 3. Data download: PC down via standard RS232 4. Mouthpiece: Easy to replace a new mouthpiece by pressing a key 5. Power Supply: Rechargeable AA battery (about 2500mAh) 6. Heat warm up: Chamber & Sensor warm up automatically 7. Auto flow monitoring: Flow detect automatically 8. Display range: 00.4% BAC or 04.0%oBAC or 02.0mg/l 9. Storage environment: -40 Degree C to +85 Degree C. 10. Temperature Range: From -20 to +70 , (-20 Degree C to +40 Degree C for optimum operation) 11. Memories: Min. 10, 000-18, 000 memories with full information:- Drive name, vehicle no., inspector name, test result with time stamp, date and time, location, instrument no., Calibration date, test no. etc 12. Measurement precision: Standard deviation +/0.025 mg/L or +/5 % of the measurement Drift: typically < 0.8 % of the measurement value/month

• Availability: 50
• Model: STS-BA-01

8CH Standalone NVR SpecificationsRecommended Number of Cameras: 8 IP CamerasPower Over Ethernet: Built-in 8 Port PoE SwitchAudio Inputs: 1-ch RCA Audio InputAudio Outputs: 1-ch RCA Audio OutputsSupported Clients: PC ClientIncoming Bandwidth: 40MbpsPlayback/Recording Resolution: up to 5 MegapixelDisplay Resolution: up to 1920x1080Display Frame Rate: up to 30 fpsPTZ Control: Supports RS-485Hard Drive Support: 2 SATA HDDsMaximum Storage: up to 8 TBsBackup Support: USB 2.0 BackupVideo Output: 1 HDMI / 1 VGAVideo Format: NTSCVoltage: 100240VAC, 4763Hz, 3APower Supply: IncludedRemote: IncludedDimensions: 19.5" (L) x 11.4" (W) x 1.8" (H) (445 x 290 x 45 mm)Instruction Manual: Included, View OnlineQuick Start Guide: Included, View OnlineWarranty: 2-Year
Speciications2MP FULL HD 1080PNETWORK VIDEO RECORDERUp to 4/8/16/32 channel IP camera inputH.264/MJPEG dual codec decodingONVIF Version 2.4 conformance3D intelligent positioning with Dahua PTZ cameraSupport 2 SATA HDDs up to 8TB, 2 USB(1 USB3.0)Multiple network monitoring: Web viewer, CMS(DSS/PSS)

• Availability: 50
• Model: SV-8001-2M-NV

The VD-TM-01 Telescopic Manipulator provides an improved ability for Disposal Technicians and EOD/IEDD Operators to maximize their standoff distance when working in close proximity to a suspect package or Improvised Explosive Device (IED). The popular VD-TM-01 is the latest generation of remote handling manipulator and includes following new features:

Technical Specifications:

FRP Helmets are manufactured using FRP composite material, which is better known as fibre-reinforced plastic. The helmets offered by us are durable and have high impact strength, thus, providing protection to the head from heavy jerks. These helmets are available in different colour and in different sizes, as per client requirements. These are fabricated using superior quality material and provide excellent protection against brick batting stone pelting and iron rods/cane attack. These easy-to-wear helmets are offered to our clients across the country at economical costs.

Features & Technical Specifications
Features:
Helmet designed for general duty ballistic protection.
Fibre Reinforced Plastic Material.
Design based on Personal Armour System Ground Troops.
Snap fit and quick release chin strap with three point suspension.
Select able adjustable and comfortable harness.
Provides excellent protection and impact resistance against blunt objects and hand-thrown projectiles encountered during Riot situation.
Available in Olive Green/ Khaki /Any Other Colour (as required) in mat/crinkle finish.
Sizes and Colour patterns are subject to customisation.
Comes fitted with detachable shatterproof aluminium mesh visor, detachable neck-protector and round shaped interior cushion padding.

Specifications:
Helmet:Shape: Round Shape Shell
Thickness:4mm 0.5 mm
Weight:1000 gms 100 gms
Face Mask/Visor:
Thickness:3mm 0.5 mm Length: 15 cm + 2cm Width: 30 cm + 2 cm Weight: 300 gms 10 gms
Upper aluminium Frame:
Width: 2.5 to 3 cm. Thickness: 3 mm + 1 mm.
Other three sides of aluminium frame:
Width: 1 to 1.5 cm.
Thickness: 3 mm + 1 mm.

Note:1. Specifications may change as per customer requirements2. Images Shown are for indicative purpose only, Actual product may differ

Day or night, indoors or outdoors, SecuraTech's STS-BW-10 is the best companion for policeofficers, security guards and other professionals. The camera's wide 170 viewing angle, /2.8aperture lens, and Full HD 1080P recordings ensure all the important details of actions are clearly recorded. Infrared LEDs come on automaticallyin low light, allowing recording and snapshots at night. The STS-BW-10 also features a built-in battery and excellent water and shock resistance, making it ideal for indoor and outdoor use.

Camera : Resolution: 1920x1080, Day and Night Camerawith infrared LED, has snapshot button to take photos whilerecording.* Microphone : Built-in* Battery : Built in, 1500 mAh, Adapter will be provided for charging* Interface : USB 2.0* Attachment : 360 o Rotatable clip. Good quality Neck strap canbe attached to clip for safety.* Operating Temperature: 0 o to 60 o C

• Model: STS-BW-10

Searchlights are lightweight, compact, high intensityilluminators that use a field replaceable Halogen short arclamp and a precision electroformed reflector to providethe ultimate source for long range and wide angleportable illumination.

Technical Specifications
Light Source:12v/55w Halogen bulb toprovide smooth and intense pre-focusedlight of approx 140 lumens.Focus Beam:1000 Mtrs.Battery:12v 7Ah Rechargeable lead acidSMF Exide Battery with inbuilt batterycharger.Run Time:90 minutesDimensions:
Length 260 mm
Front diameter 160mm
Rear diameter 135mm
Weight Approx 3.7 kgCasing/Body:One piece moulding withintegral handle made of super tough glassfitted poly-carbonate material minimumthickness of 2.5mm front & back cover withtool less removal.Shoulder Strap:135cm long 3cm widerubber flap sifted inside the nylon strip.

Operating Temperature: -20 C to +55 C, RH up to 90% none condensing.
Circuit Description: Push to ON/OFF switch & membraneswitch.
Low battery indication with audio.
Dimmer & Auto flashing withmembrane switch.
Timer, flasher & continues modeselect membrane switch
DC Blown Fuse indicator
DC Fuse is placed outside

Charging status indicator:
Bust Mode Red
Tickle Mode Yellow
Full Charged Green blinking

Additional Features:
Single Panel Indication.
Completely Waterproof / Allweather proof.
Light weight
Easy operation

Certifications: CE and ISO Certified.

Note: Searchlights are lightweight, compact, high intensityilluminators that use a field replaceable Halogen short arclamp and a precision electroformed reflector to providethe ultimate source for long range and wide angleportable illumination.

Technical Specifications
Light Source:12v/55w Halogen bulb toprovide smooth and intense pre-focusedlight of approx 140 lumens.Focus Beam:1000 Mtrs.Battery:12v 7Ah Rechargeable lead acidSMF Exide Battery with inbuilt batterycharger.Run Time:90 minutesDimensions:
Length 260 mm
Front diameter 160mm
Rear diameter 135mm
Weight Approx 3.7 kgCasing/Body:One piece moulding withintegral handle made of super tough glassfitted poly-carbonate material minimumthickness of 2.5mm front & back cover withtool less removal.Shoulder Strap:135cm long 3cm widerubber flap sifted inside the nylon strip.

Operating Temperature: -20 C to +55 C, RH up to 90% none condensing.
Circuit Description: Push to ON/OFF switch & membraneswitch.
Low battery indication with audio.
Dimmer & Auto flashing withmembrane switch.
Timer, flasher & continues modeselect membrane switch
DC Blown Fuse indicator
DC Fuse is placed outside

Charging status indicator:
Bust Mode Red
Tickle Mode Yellow
Full Charged Green blinking

Additional Features:
Single Panel Indication.
Completely Waterproof / Allweather proof.
Light weight
Easy operation

Certifications: CE and ISO Certified.

Note:1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

Technical Specifications:The disruptor has specially designed liquid container with large scale calibre.High pressure muzzle, generating very high velocity jet of cool liquid.Multi shock absorption mechanism, making the recoil transmitter to the disruptor mount% less than the common disruptor.The disruptor has laser sight necessary for focusing from to meters or more.The disruptor is capable to aim and generate high velocity jet of liquid from a distance of atleast 10 to 15 feet to effectively open any suspected hard metal package, pipe , gascylinder, metal casing etc. can be effectively used to open ordinance shells.The disruptor is of high stability with special designed mount preventing the overturncaused by recoil.The disruptor is user friendly and not has much set up time.It is capable of firing following projectilesBlade ProjectileBolster ProjectileChisel ProjectileFin/Spin StabilizedFork ProjectileThe disruptor spares are easily available as and when required.The disruptor is easily portable and light. Weight should be between 15 to 19 kg.The disruptor is initiated using initiating power of 24 V/Amp and power of initiator should be a 9-volt battery.The disruptor has velocity of more than 360 m/SecThe disruptor is able to be mounted on a stand and operated in 360 degrees.
Accessories:o Operational Manualo Carrying case with harnesso Training material / aid

Blasting Machine Specification:Dimensions & weight:

Construction:
Fibreglass / cast casing for rugged use.
Firing Capabilities:
50 detonators at 100 m
Power Source:
Rechargeable SMF Battery
LED status indicators:
Full Charge, Ready Battery Status and Line continuity indicator
Capacitor discharge:
instant
Galvanometer:
Digital
Working Temperature:
45 C to +50 C.
Protection:
Impact & water
Number of firings:
600 at 20 C per battery
Priming time:
3 seconds approx.
Safety features:
To avoiding accidental fire
Power output:
550 Ohms.

Note:
1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

• Model: STS - AD 01

• Delineator with radium made with 16 gauge MS Rectangular Pipe which size is 25 x 68 mm and of length 600 mm.

• Power coated or pipe stove enameled and 0 baked to 120 C.

• Hand made out of plastic rectangular moulded with flat face provided with high intensity prismatic reflectors of colour.

• Yellow size 100 x 125 mm

• Additional 2 reflective strips i.e 25 mm wide.

• Warranty: 1 year

Note:
1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

Technical Specifications:

The equipment is capable to achieve its peak temperature of minimum 250 C inless than 6 minutes
The equipment having a heating element head in the shape of equilateral triangle.
Size of the triangular head : 5' + 1/2"
The cutting edges of the triangular head are thin, sharp & rigid.
It is able to cut the plastic material of thickness minimum 5mm
The triangular head is attached with the stand with the help of rod of maximumlength 50cms, adjustable as per requirement.
The rod is attached with the stand with the help of hinge which can be rotated in360 degree. The base of the stand can be placed on uneven ground & able holdthe complete equipment stable.
Total weight of equipment (excluding Accessories) Approx 6Kgs.
Operate on 220 volts Ac. The length of the cable for main supply is of 20 meterswith an additional 300 meters cable with an attachment arrangement.
All metal parts are rust proof and rugged for repeated use, all electrical
components comply with ISI/BIS standard.
The carrying case is light weight, Water resistant, scratch proof, rugged andwheeled for storage and transportation.

Note:1. Specifications may change as per customer requirements2. Images Shown are for indicative purpose only, Actual product may differ

Features:-

• A ring-shaped shackle for the wrist, which is one of a pair connected by short chain.
• Rotating arm backloads for speed cuffing.
• Double Locking Mechanism.
• Material used to make the handcuffs i.e. nickel coated metallic with nickel finishing.
• Prevents the ratchet from advancing further in the closing direction.
• A mechanism which locks a handcuff pawl in an engaged position.
• Weight: 270 gms
• Dimensions: Each handcuff of each pair to have minimum opening of 55 mm for insertion of the human wrist. The inside perimeter of the handcuff to be a minimum 200 mm when the ratchet is engaged at the rist notch entering the locking mechanism. The inside perimeter of the handcuff to be a maximum of 165 mm when the ratchet is engaged at the last notch entering the locking mechanism. The maximum overall length of the pair of handcuffs to be 2200 mm.
• Show no substantial corrosion and to continue to function.
• Warranty: 3 years
• Finish: Bright Nickel Finish
• Two standard keys with every handcuff.

Note:1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

Features & Technical Specifications:-
Features:
Physical protection against brickbatting cane/knife/acid attacks, Molotov cocktails andprojectilesencountered in Riot situation andother policing functions.
Special fire retardant, high impactresistance rubber inserts
Protective sheets for front and backpouches with trauma padsSweat absorbing meshfabric(detachable & washable) in-linedelbow and shin guards ergonomicallyformed to
protect limbs duringriot/mob situation
Impact attenuation (reduction) above80%Ergonomic design for maximumwearing comfort.
Ergonomically designed Elbow andshin guards to protect limbs duringriot/mob situation.
Design ensures restraint freemovement long shelf life, light wt.with Excellent protection
capability

Specifications:
Total length: 140 cm (+ 5%)
Shoulder: 44 cm (+ 5%)
Collar: 42 cm x 35 cm (+ 5%)
Pocket size: 28 cm x 35 cm (+ 5%)
Weight: Approx 3.4 kgs.

Note:1. Specifications may change as per customer requirement2. Images Shown are for indicative purpose only, Actual product may differ.

• Availability: 1
• Model: STS-FBP 1

Technical Specifications:-
Prodder: Used for removing soft soilor drilling through soft soil for thelocation of buried/hidden explosivedevices.Tip: Tapered to prevent damagefrom hard object during insertion.
Probe: 10 mm diameterMetallic - made of stainlesssteel. (Optional)Non-metallic - made of goodquality PVC Fibre. (Optional)
Length:Short assembled- 500mm.Long assembled- 1200 mm
Hand Grip: Grip made of nonconducting& hard material.
Carry bag: Suitable carry bag withcarrying strap.
Prodding-force: Easley with standminimum force of 30 kg
Weight: 0.9kg-1.25kg
Mounting Accessories: LED Torchwith rechargeable battery for nightviewing. (Optional)

Note:1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product maydiffer.

• Availability: 1
• Model: STS - PD 01

Tools Description

• Vice grip pliers with ring (25 mm max jaw gap 115 mm): 1 Nos.
• Hook single (50 mm gap): 1 Nos.
• 'S' hook (25 mm gap): 1 Nos.
• Hook single with ring (25mm): 1 Nos.
• Hook double with ring (50mm): 1 Nos.
• Ring large (50mm): 1 Nos.
• Ring small (25mm): 1 Nos.
• Bonnet cover opener: 1 Nos.
• Trunk lid opener screws clamp: 1 Nos.
• Car Door opener: All Types
• Door opener clamps all types of cars / remote window breaker: 1 Nos.
• Door handles lifter: 1 Nos.
• Door button pusher: 1 Nos.
• Multipurpose clamp: 1 Nos.
• Ignition key holder screw type: 1 Nos.
• Ignition key holder with magnet: 1 Nos.
• Key / handle clamp: 1 Nos.
• Spring clip hook double with ring (50mm): 1 Nos.
• Spring clip with ring (25mm) : 1 Nos.
• Triangular window opener: 1 Nos.
• Rope nylon 2 mm diameter, 10m (200 kg load): 1 Nos.
• Rope nylon 2 mm diameter, 15m (200kg load): 1 Nos.
• Rope nylon 2mm diameter, 30m with hook (600 kg load): 1 Nos.
• Stand held lifting assembly: 1 Nos.
• Pulley snatch strength: 1 Nos.
• Hub cup opener with ring -01 screw driver set: 1 Nos.

• Double end spanner set (5/7 to 22/27): 1 Nos.
• Rivet opener screw type x 01 and rivet opener punch type: 1 Nos.
• Hammer ball pana / claw: 1 Nos.
• Cutter knife : 1 Nos.
• Special lead for self starter: 1 Nos.
• Pliers side cutting : 1 Nos.
• Karabiner type hooks 23mm / 2700 kg: 1 Nos.
• Special clamp for bonnet cover with vice grip pliers: 1 Nos.
• Suction pad anchors: 1 Nos.
• Self adhesive anchors: 5 Nos.
• Heavy duty cantilever jaw grip: 2 Nos.
• Sliding clamp anchor: 1 Nos.
• Telescopic tripod with top eye (capacity-750 kg ) overall height: 2000mm, steel anchor pegs for stability, min pitch circle dia of 2000mm at max extension: 1 Nos.
• Pelican carrying case with rubberized foam insects to accommodate the tools Misc:
• Cleaning kit
• Technical manual giving full description of the item
• Users hand book

Note:1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.

• Availability: 1
• Model: STS-CROT 01

Tools Description
Doctors Stethoscope.
BP Handle 6 + 1 with BP Blade setScissors 6, 7, 8 + 1Dental Mirrors 6 + 1, 10 + 1.Scalpel 8 + 1Artery Forceps 6, 7, 8, 9 + 1Torch with two pencil cellsTorch medium with two cellsHammer sledge and ball pane (2 Kg + 10%) with claw hammer.Pipe wrench 10 + 1Hand vice Grip 6 + 1Magnifying GlassNipper cutterTin cutterNose PlierKnife 80 mm BladeC Clamp 4 + 1Spanner Adjustable 15 mm + 5 mm= Spanner Adjustable 30 mm + 5 mmHack Saw 7 + 1 with blade set.Hand drill with drill bit set.Spanner 10 piece metric set.Spanner 10 piece imperial set.Soldering iron 6 with soldering paste & solder wire 50 gmsSponge holder 10 + 1Can opener 6 + 1Tape celloTape blackTape paperPunch 5 + 1Cold chisel 6 + 1Cold chisel 8 + 1Screw driver set (watch maker)Screw driver alignmentSuper glue adhesiveThermal Cutter
Screw Driver set consisting of :o Flat 2 mm + 1 mm blade widtho Flat 4 mm + 1 mm blade widtho Flat 6 mm + 1mm blade widtho Flat 8 mm + 1mm blade widtho Flat 10 mm + 1 mm blade widtho Flat offset 6 mm + 1 mm blade widtho Flat offset 7mm + 1 mm blade widtho Flat offset 10mm + 1 mm blade widtho Cross point 75mm + 10mmo Cross point 150mm + 10mmo Cross point 200mm + 10mmo Cross point 250mm + 10mmPliers cutter with grip long point nosePliers cutter/grip combinationPliers flat jawPliers round jawCutter side 160mm + 10mmCutter side 120mm + 10mmFish line with hookTweezersProbe (straight & angular)Wire brushSwiss Army KnifeTape measuring 4mtr + 1mtrNon metallic probeHand glovesFire extinguisher 600 gm + 100gm.Bar lever spike & cranked chisel ends 445mm + 10 mmBar lever cranked form & wedge ends 260mm + 10 mmSquare driver socket setPick 560 mm + 10 mm headPry barShovel round nose Folding ladder (optional - subject torequirement of the user)o Length 12 feet, Width 1 foot.o Width 1 foot.o Weight maximum 15 kgso Capacity 85 Kgs + 10 kgs. Miscellaneous:Cleaning kit, User Hand Book.

Note:1. Specifications may change as per customer requirements2. Images Shown are for indicative purpose only, Actual product may differ

• Availability: 1
• Model: STS - RSP 04

A boom barrier is a bar or pole pivoted toallow the boom to block vehicular accessthrough a controlled point. Typically the tip ofa boom gate rises in a vertical arc to a nearvertical position. Boom gates are oftencounter weighted, so the pole is easily tipped.

Technical Specifications:-Features: Anti-crush safety mechanism to suspend the motion of barrier when met withany obstruction. Quick opening and closing of barrier with soft landing. Speed of barrier is programmable (upto 100%) while installing as per frequencyof traffic. Provision to integrate with other peripheral devices like Access Control System, Beam sensors.
Single push button activation and operation / wireless remote operation(Optional) Weight with boom: Upto 80 Kgs weight will change according to the boomLength. Safety device like beam sensor should be provided with the barrier.
Clamping mechanism in open and closed positions.Control system such as gear unit, crank drive and control unit etc. Are wellhoused inside a stainless steel pole stand casing.Distinct visible marking/paintwork.100 micron epoxy zinc plating anti corrosion paint coated barrier body

• Availability: 1000
• Model: STS- CRBB 01

Specifications:

• The vehicle locker highly visible due to bright colors i.e. red and yellow.
• Vehicle locker adjusted to fit 7 to 11 inches width tires.
• The vehicle locker used to be very simple and fitted in few seconds.
• It is portable and store anywhere.
• The vehicle locker provided soft coated clamp to prevent scratching or damaging wheels or rims.
• Warranty period: 2 years

Note:1. Specifications may change as per customer requirement2. Images Shown are for indicative purpose only, Actual product may differ.

• Availability: 1

Main FeaturesSupports up to Full HD 1080p @ 30fpsBuilt-in standard PoE (IEEE 802.3af)True Day/Night operation (IR cut filter)Built-in IR LEDsIR Range: 20 metersWide dynamic range (WDR) operationIP66 compliantONVIF2 year warranty

Camera Specifications
Image Sensor .Progressive scan 1/2.9 CCD, 2.0MPMaximum Resolution .1920x1080Minimum Illumination .F1.4, 0.12 lux (IR on 0 lux)S/N Ratio .50dBIR LEDs .36IR Range .20 meters (depending on scene relection)White Balance .AutomaticExposure Control .YesDigital Slow Shutter .YesWDR/BLC .WDRDay/Night .IR-cut filterDNR .2D/3D
Video Specifications
Supported Resolutions .1920x1080 @ 30fps / 1280x720 @ 30fpsCompression .H.264 (HP/MP/BP), MJPEGBitrate Control.VBR, CBRMultiple Streaming .5 simultaneous profiles
External Terminal Specifications
Ethernet .10/100 MbpsAlarm .1 sensor inputAudio .1 mic in, 1 line out (3.5mm)Power .DC jack

• Availability: 200
• Model: SV-2IPB-6M-P

Features:
High detection sensitivity.
Capable to discriminate between two metals placed adjacent to each other.
Automatic adoption to soil and water conditions.
No effect of magnetized soil or of Sea water.
Safe for electrically activated mines.
Adjustable volume control.
Selector switch for static or dynamic operation.
Pinpointing the target within ± 3cm 

Additional Features:
All weatherproof.
Lightweight with complete operating weight of approx 3.5 Kg.
Easy operation, no adjustment or compensation necessary.
Technology: Pulse Induction Technology.
Metal Detection: Ferrous, Non-ferrous, Ferrite & Alloys.
Capable to detect Metal inside hollow PVC Pipe of 2 mm.
Capable to detect Metal in mineralized soils from 2.5 feet depth.
Capable to detect Metal on 1 cm cement plastering walls.
Maximum Usable detection: 0.05 gm. Stainless steel at 75 mm.
Battery / Power Supply:Inbuilt rechargeable battery with low battery indicator.
Carrying Case: Light weight safety carrier / container for safe transportation.
Warranty:2 years against manufacturing defect.

Note: 1. Specifications may change as per customer requirement
 2. Images Shown are for indicative purpose only, Actual product may differ.