Seemsan Pumps & Equipment Pvt. Ltd.

Mumbai Nashik Highway, Thane, Maharashtra

APPLICATIONS Transfer of various grades of oils like light Diesel Oils, Fuel Oils, Transformer oils, lube oils, castor oils, Grease , wax etc. Transfer of chemicals like sodium silicate, caustic soda, resins, enamels, adhesives, fatty acids, paints and varnish, pulp, juices, Syrups, Alcohol, Kerosene, etc. Atomising of fuel oil at high pressure for burners and boilers. Lubrication of gear boxes, cranes, Machine tools, etc. Cooling and filtering in machine tools. Heat transfer liquids for chemical vessels. Hydraulic systems for presses, power pack units etc.

Heavy duty engineered polypropylene sump-pump for primery effluents / corrosive liquids and scrubbing systems :

• Zero maintenance pumps, eliminates the need for gland packing and seal
• Leak proof and can run dry without damage of rotating parts
• Pumps to be mounted out side the suction tank in vertical position and not to be submerged
• Vertical gland less pump, similar in hydraulic design to any conventional centrifugal pump, it differs in, so far as restriction is provided, escape by way of an overflow connection in the upper pump body & return to the suction line
• Preferred selection for E.T.P. Plant because of seal less design
• Pump is seal less hence can run dry
• Minimum component makes maintenance easy
• Low maintenance cost and prolong life
• Ideally recommended for transfer of treated effluent
• No mechanical seal / glands, hence pump can run dry
• Low maintenance cost and easy to maintain
• M.O.C. PP - UPTO 55^o- 60^o C
• PPH - UPTO 90^o 100^o C
• PVDF - UPTO 100^o - 110^o C
• We are fully committed to providing the finest pumps, the best engineering, the most effective customer service & the greatest after sales support possible.

Standard Pumps filled with Ceramic Sleeves and FEP/ PFA ( FEP/PFA Lined Pumps) Bellows Mechanical Seals. Excellent for handling corrosive chemicals like HCL, dil HrSO4, HNOs, FeCIs, CUSO+, HE HBr, CH.CoOH, NaOH, HsPOa, NaCl etc.

Applications :

• Alkalies Transfer
• Recirculation of Electrolyte
• Scrubbing of Corrosive Gasses like Clz, Brz, lz, Soz, Co.
• Effluent Treatment
• For Descaling of Tubes
• Filtration

lndustries :

• Chloro - Alkali lndustries
• Chemical & Pharma lndustries
• Food lndustries
• Electronic lndustries
• ETP/WTP/STP
• Electro Plating lndustries

Models :

• ATOM-100
• ATOM-120
• ATOM-130
• ATOM-130H

These Pumps are recommended for :

• lntermediate duty of 8 to 10 hours per day running.
• Occupies less space, easy to handle & economical.
• Electroplating solution circulation & etching solution for electronic circuit board.
• Available with PVDF impeller & silicon carbide mech. seals for high temperature ancj aggressive acids.
• Pumps are available with lnternal Mechanical Seals (lMS).
• Pumps are available in Gland Packing construction
• Above pumps are also available in PTFF lined construction.
• Pumps are also available in Gland Packing
• Pumps are supplied with special Mech.Seals for applications like Slurries, thicker liquids, rnixing fluids etc.

These Pumps are high head (upto 45 mts) with different capacities coupled to 2900 RPM motors.

These Models Are Highly Recommended for :

• Excellent for scrubbing corrosive and aggressive gases like Cl2, Br2, 12, SO2, CO3, etc.
• Used in transfer of chemical in batch process.
• Recommended for use against filter press in dyes and intermediate industries.
• For recirculation of chemicals in electroplating industr
• All Models.- are available with PVDF impellers for high temp. upto 90oC.
• ALTRA-190 Model is high head (upto 50 mts) low capacity pump coupled to 2900 RPM motor. Excellent for vaccume ejectors.
• Pumps are available with Internal Mechanical Seals (IMS).
• Pumps are available in Gland Packing construction.
• Above pumps are also available in PTFE lined construction.
• Pumps are also available in Gland Packing
• Pumps are supplied with special Mech.Seals for applications like Slurries, thicker liquids, mixing fluids etc.
• Pumps are available in special material on request.

High Speed Series :

• ALTRA - 140
• ALTRA - 150
• ALTRA - 160
• ALTRA - 170
• ALTRA - 190

The air valve directs pressurized air to the back side of diaphragm 1. The compressed air is applied directly to the liquid column separately by elastometric diaphragms. The diaphragm acts as a separation membrane between the compressed air and the liquid. Driving the diaphragm with air instead of the shaft balances the load and removes mechanical stress from the diaphragm, dramatically extending diaphragm life. The compressed air moves the diaphragm away from the center block of the pump. The opposite diaphragm is pulled in by the shaft connected to the pressurized diaphragm. Diaphragm 2 is now on its air exhaust stroke; air behind the diaphragm has been forced out to atmosphere through the exhaust port of the pump. The movement of diaphragm 2 toward the center block of the pump creates a vacuum within chamber 2. Atmospheric pressure forces fluid into the inlet manifold forcing the inlet valve ball off its seat. Liquid is free to move past the inlet valve ball and fill the liquid chamber. Air-operated double diaphragm pumps can move anything from fine chemicals (gentle, non-shearing action), to abrasive and viscous slurries (no close-fitting parts, low internal velocities), and almost any other product that can move. A few of the thousands of products now being pumped: Paints & solventsPigmentsResinsConstruction water & wasteBeer & wineMine tailingsChemicalsOils & lubricantsGlues & adhesivesDyesFoodsTanker loadingunloadingMarine bargesCeramic slips, slurries & glazesLatexDriller's mudInks & printing liquorsAgainst filter pressLow density powdersHandling Barrels, Jerry Cans, Carbouys.