Pumps, Pumping Machines & Parts #4101075

The Fluorinated Polymer are widely appreciated for their remarkable chemical inertness and their excellent resistance to ageing. POLYVINYLIDENE FLUORIDE (PVDF) offers the specific advantage of easy processing in accordance with all the convection methods used in the plastic industry. PVDF, polymerized, according to its own special process, offers a high degree of crystallinity to that by other processes, resulting among other things, in superior thermomechanical properties. The intrinsic technical superiority is one of the reasons for the success which PVDF has achieved on the world market for more than 20 years. Easy processing by : extrusion, injection, compression, rotational moulding, blow moulding etc.Chemically inert to most acids, aliphatic and aromatic organic solvents, alcohals etc.Very high purity.Excellent mechanical properties over a wide range of temperatures : tensile yield strength up to 55 MPa at 23C and 10 MPa at 150C.Abrasion resistance comparable to that of polyamides, and relatively low coefficient of friction.Continuous use at temperatures as high as 150C for the homopolymer grades (without mechanical stress).Excellent thermal aging resistance : tensile yield strength retention over 90% after 25, 000 hours at 150C in a ventilated oven.Unaffected by UV (>232nm) and good resistance to gamma radiation.Excellent intrinsic fire resistance.Very easily joined by welding and good capability for thermoforming.Physiologically harmless and approved for contact with food products (FDA).

Technical Features : All the wetted parts are made from INVESTMENT CASTINGS using lost wax process, giving excellent surface finish, sound castings, giving minimum resistance to flow resulting in better efficiencies. Chemical process pumps in investment castingsHeavy duty design features for total range of process services.Maximum interchangeability, gives minimum spare parts inventory.Greater quality control and accuracy in production of every pump with the modern machining operations.Back pull-out design, permits quick inspection or repairs of rotating elements without disturbing electrical and piping connections resulting in minimum down time.Hydraulic performance maintained by simple external axial adjustment of impeller wear.Exclusive balanced thrust.Standard dimension, cut layout design cost.Standard foundations save installation and drawing time, talent and money.Fully open impeller with back pump -out vanes reduces stuffing box pressure and prevents entrance of solids and meets low NPSH requirements.Long life Low maintainence Reliable operationPumps available in CF 8 M (SS-316), Alloy-20, CD 4 MCU, SS 316 L(CF3 M), Hastalloy B and Hastalloy C Maximum Sealing Facility Inside unbalanced Seal.Inside balanced seal.Optional quench gland using throttle bushingOptional throat bushing inside stuffing box cover.Outside mounted teflon bellow seal.Double mechanical seal. Specially developed seal for tough slurry applications (can take slurry upto 40%) Service coverage SCP-SM pump cover 60% of all process industry requirements. SCP-MD Pumps are meant for high capacity high head requirements and cover 80% of the requirements of the process Industry. SCP-LC Pumps are low cost pumps and cover almost 40-50% of process Industry requirements.

Advantages : Centripetal self-priming pumps with turbine type impellers.Excellent for solvents tank farms.All parts made in investment casting to give superior hydraulic performance

Performance range : Capacity upto . 12 mhrHead upto . 35 m.Power upto . 5.5 KW Features : High head low capacity pump.Available in S.S.-316 INVESTMENT CASTING and Cast Iron with all wetted parts of S.S.-316.Excellent for handling solvents from barrels and from tank farms to the charging vessels.Seal leakage can easily be detected from window in priming chamber.Pump can take negative lift from 3 to 5 meters.Maintenance is easier, Drain arrangement is standard.Compact design - requires less space, No grouting required. Advantage at a glance : Low NSPH requiredLife lubricating bearings, covered from both the ends so minor leakage from pump side does not affect bearings.Being a low speed (1450 RPM) pump, Less Maintenance is needed.Installation is easier since motor required is vertical flange type and is directly coupled to the pump, coupling alignment is simpler.Low overhang shaft arrangement giving minimum deflection at the seal faces.Floating type impeller reduces noise and vibration.Available only with mechanical seal (internal mounted), rotary faces of Carbon and Glass Filled FEP PFA ( FEPPFA Lined Pumps) (GFT) are optional.Seal cooled and flushed by process fluid itself.Minor leakage at suction side does not affect pump performace.Biggest advantage from installation point of view is that since it is an "in line" type pump, it can be fitted as a valve and hence it will not require any suction or delivery piping efforts. Available with trolley for MOBILE application Keeping in view the fastest growing demand for transfering various types of solvents from the barrels to the overhead reaction vessel in pharmaceutical, bulk drugs and other process industries. All models are developed with trolley for mobility.

Associated with a diligent professionals and smart packaging facility, we are capable to undertake standard as well as tailored packaging requirements of the clients. Based in Thane(India), we have gained prominence in the market with our professional behavior and affordable prices.

All wetted parts, outer & Inner pipes are made of Polypropylene.The shaft is made of imported Hastalloy-B-2. (Containing 29% Molybdenum).The impeller is made of ETFE (Moulding grade of FEP PFA ( FEPPFA Lined Pumps)). APPLICATION For highly corrosive liquids like conc., HCI, Dil H2SO4, HF, NaOH, formic acid, electroplating solution, photographic developers, salt solution, pesticides intermediates, toxic chemicals.

All wetted parts like pumping chamber, pump base, discharge tee, nozzle, wing nut, impeller are made of SS316 investment castings.The outer & inner pipes are seamless type made of SS-316.The shaft is made of SS-316 bright bar.The guide sleeve and lip seals are made of teflon APPLICATION For almost all types of Solvents, Varnishes, Turpentine, Paints, Gasoline, HSD, Petroleum products, Chloroform, Drugs & pharmaceuticals, Degreasing agent, Phenol, IPA, LDO, Water treatment chemicals, Nitric acid, Phosphoric acid, Thermic fluid.