Other Products / Services #5879151

This is the most economical, reliable, rugged and accurate instrument for Microprocessor Visible Spectrophotometer analysis of any concentration. It operates at a wavelength range of 340 nm to 960 nm. The output is available on a 16 x 2 line alphanumeric backlit LCD display in terms of %Transmission (%T), Absorbance (Abs.), Concentration (Conc.) and K Factor. It is the type of Laboratory Spectrophotometer.

Wavelength Range 340 - 960 nm
Resolution %T: 0.1,
Abs: 0.001,
Conc.: 1
Output %T: 0 - 100,
Abs: 0 - 1.999
Conc.: 0 - 1999
Detector Silicon Photodiode Light Source 6 V, 10 W, Tungsten Halogen Lamp Monochromator 600 line/mm
Diffraction grating Sample Holder 10 mm Glass Cuvettes (50mm & 100mm Optional)
Spectral Bandwidth Less than 5 nm Wavelength Resolution 1 nm
Wavelength Accuracy 1 nm
Repeatability 2 nm
Display 16 x 2 line alphanumeric backlit LCD display
Operating Temp. Range 5C - 45C
Power Supply : 230 VAC
Power 230 V 10% AC, 50Hz
Dimensions (L x B x H) 475 x 285 x 130 mm (Approx.)
Weight 8 Kg (Approx.) Accessories Matched Cuvettes: 1 Set,
Operation Manual and Dust Cover

Mainly used for observing TLC plates and spots the are visible only under UV rays. It can be used to check fluorescent impurities under UV rays. Provided with 3 tubes to be worked on 230 Volt AC only. Special glass is fitted on the viewing window to protect eyes from UV rays. ndividual switches are provided for each tube. Magnetic lock provided on th e doo r. A properly enclosed viewing chamber, which eliminates external light Interference. Body is made of black acrylic plastic, to protect from rusting and other chemical oxidations, also to avoid any electric shock while working inside the chamber.

Wattage : 100 watt

Color : Black

Wavelength of light : 254 nm and 366 nms.

It is a pH electrode with plastic body used to measure pH value of the solution .The sensing bulb is protected by covering the bulb . It can measure from 0-14 pH Value . It has BNC Connector with one meter wire length.

Top plate is made of cast iron/S.S and rest casing of G.I sheet powder coated.

Double walled construction fully made of stainless steel. Gap between the two walls is filled with glass wool insulation, provided with S.S shelves. Temperature is controlled by Digital PID controller. Temp range 50C to 250C, accuracy +/-2C.

This is made as specified by IP-15, ASTM-D-97-57 & IS 1448-1970. The pour point is the lowest temperature at which the oil will just fall to flow. The apparatus consists of a main cooling bath made of stainless steel sheet and stand unit with drain plug and cover with provision for fitting thermometer and a filling aperture for adding freezing mixture. A glass jar for containing oils, jacket, disc and gasket is standard scope of supply.

Temperature Range : Up to -170 C
Resolution :0.10 C
Controlled Accuracy : 20 C
Controller : Microprocessor based with PT 100 Sensor
Outer Body :CRCA Powder Coated
Inner Chamber : Stainless Steel
Cooling : Hermetically sealed compressor with fin & tube type air cooled condenser
Insulation : High Dense PUF