GST : 24ABSFS3603E1Z9
Write a Review
Our Products
Our Complete range of products are Electromagnetic Suspension Magnet, Suspension Magnet, Pneumatically Operated Hump Magnet, Bullet Magnet and Hopper Magnet.
Electro Suspension Magnet consisting of aluminum or copper wound coils immersed in a transformer oil (for prevention of overheating or shorting) or air-cooled for extreme or dusty environments. All electro suspension magnets come along with control panel. Operating heights up to 150 mm to 450 mm are available. Manually cleaned Suspension Electro Magnet can be supplied with a stripper mechanism. No power consumption, virtually maintenance free.
Specifiaction
| SVM Model | Magnet Dimensions mm | Magnet Height mm | Magnet Voltage VDC | Magnet Wattage | Approx Weight Kgs |
| SVM 241 | 600 X 600 | 550 | 115 | 1650 | 430 |
| SVM 301 | 750 X 750 | 650 | 115 | 2700 | 700 |
| SVM 361 | 900 X 900 | 500 | 115 | 3800 | 1050 |
| SVM 422 | 1050 X 1050 | 550 | 230 | 5000 | 1600 |
| SVM 482 | 1200 X 1200 | 600 | 230 | 6600 | 2250 |
| SVM 542 | 1350 X 1350 | 650 | 230 | 8000 | 3150 |
| SVM 602 | 1500 X 1500 | 750 | 230 | 10000 | 4000 |
| SVM 662 | 1650 X 1650 | 800 | 230 | 12250 | 5200 |
| SVM 722 | 1800 X 1800 | 800 | 230 | 14500 | 7250 |
| SVM 782 | 2000 X 2000 | 900 | 230 | 17000 | 9100 |
Suspension magnet are used in the bulk production of
Salient Features
The Greenwood Permanent Magnetic Bullet Separator is a compact, efficient in-line magnetic separator for extracting ferrous metal contamination from either gravity fed or pneumatic pipelines. It is normally fitted into pneumatic process lines, often for food powders, and intake lines with high velocity where abrasive products (such as wheat) can present a problem. The magnets are positioned in such a way as to give good access, as they need to be cleaned regularly.
To clean the magnet, the star knobs are unbolted and the door with the magnet removed from the housing. For faster access we also offer the clients the choice of quick release swing bolts. On larger applications where the pressure is low (or gravity fed) the magnet is attached to a round door which swings out. The magnet is then cleaned manually and replaced. For flour lines with iron additive, we recommend a maximum strength of 7000 gauss so that the iron additive is not removed from the product.
The separator is manufactured from stainless steel, and the dry, free-flowing product flows through the body and over the bullet magnet which extracts the contamination. The magnetic separators can be horizontal as well as vertical, the flow being up or down. Internal deflectors ensure that the product is diverted over the bullet magnet with minimal turbulence and no blockage.
In terms of supplying a bullet magnet separator, we first consult with the client to determine specifications such as the size of the line, the pressure in the line, the size of the product, the temperature, and tonnes / hour. Then we supply drawings to suit their applications for approval prior to manufacture.
A good example of an application of this technology is a large rare earth bullet magnet, for a 250mm diameter line, rated at a very powerful 15000 gauss, produced for an animal feed ingredient manufacturer. They produce meal powder for the pet food industry. A lot of the raw material (bones, etc.) is ground to produce the powder, and inevitably this creates ferrous metal fines (very small particles) in the product, which are caught by the bullet magnet. Since the separator has been installed the company have found very little carry over of metal fines further down the process, thus improving their product, and streamlining their production to make it more efficient.
Applications
Salient Features
Specifiaction
| Type | CAT No. (Model no. as per catalogue of JMPL) |
DIM. A. mm |
DIM.B. mm |
DIM.H. mm |
No. of Magnetic Rods & DIA |
| SQUARE | SVM-SHM-01 | 200 | 115 | 65 | 2 X 40mm |
| SVM-SHM-02 | 250 | 165 | 65 | 2 X 40mm | |
| SVM-SHM-03 | 300 | 215 | 65 | 3 X 40mm | |
| SVM-SHM-04 | 375 | 290 | 65 | 4 X 40mm | |
| ROUND | SVM-RHM-01 | 200 | 115 | 75 | 2 X 40mm |
| SVM-RHM-02 | 250 | 165 | 75 | 2 X 40mm | |
| SVM-RHM-03 | 300 | 215 | 75 | 3 X 40mm | |
| SVM-RHM-04 | 375 | 290 | 75 | 4 X 40mm |
Salient Features
Salient Features
Applications
Slient Features
Salient Features
Salient Features
Applications
Features and Options of Demountable Grate Rotary Magnet / Magnetic Separator
Housings handle gravity, moderate positive and negative pressures. The angled shape directs the product flow into the magnetic field, helps prevent build-up and bridging, and also breaks up clumps of product for increased protection against entrapped ferrous debris.
Half-Hump MagnetsOur Half-Hump Magnets are used where Hump Magnets will not fit because of height restrictions. Like its larger version, the Half-Hump housing directs the material flow over the single high-strength permanent magnet and breaks up aggregated material to dislodge and capture embedded metal contaminants.
Self-Cleaning EfficiencyPneumatically controlled self-cleaning models reduce downtime and permit remote or automated operation. We offer a pre-engineered control package for optimum sequencing of the cleaning cycle.
Salient Features
Features
Specification
Details
Specifiaction
| Code No. | Size | Pole Pitch |
| SVM - 83701 | 300L x 150W | 9 mm |
| SVM - 83702 | 450L x 150W | 9 mm |
| SVM - 83703 | 300L x 200W | 9 mm |
| SVM - 83704 | 450L x 200W | 9 mm |
| SVM - 83705 | 500L x 200W | 9 mm |
| SVM - 83706 | 600L x 200W | 9 mm |
| SVM - 83707 | 450L x 250W | 11 mm |
| SVM - 83708 | 500L x 250W | 11 mm |
| SVM - 83709 | 600L x 250W | 11 mm |
| SVM - 837010 | 450L x 300W | 11 mm |
| SVM - 837011 | 600L x 300W | 11 mm |
| SVM - 837012 | 750L x 250W | 11 mm |
| SVM - 837013 | 750L x 300W | 11 mm |
Details
Specifiaction
| Size (mm) | Pole Pitch (mm) | |
| SVM 72101 | 250 L x 150 W x 60 H | 1.5 |
| SVM 72102 | 300 L x 150 W x 60 H | 1.5 |
| SVM 72103 | 350 L x 150 W x 60 H | 1.5 |
| SVM 72104 | 400 L x 150 W x 60 H | 1.5 |
| SVM 72105 | 450 L x 150 W x 60 H | 1.5 |
Specifiaction
| Size (mm) | Pole Gap (mm) | |
| SVM 72102 | Ø 150 x 60 H | 14 |
| SVM 72103 | Ø 160 x 60 H | 16 |
| SVM 72104 | Ø 175 x 60 H | 16 |
| SVM 72105 | Ø 200 x 60 H | 16 |
| SVM 72106 | Ø 225 x 65 H | 16 |
| SVM 72107 | Ø 250 x 60 H | 19 |
| SVM 72108 | Ø 300 x 70 H | 19 |
| SVM 72109 | Ø 375 x 70 H | 19 |
| SVM 72110 | Ø 400 x 70 H | 19 |
| SVM 72111 | Ø 450 x 70 H | 19 |
Mr. Ronak Panchal (Shree Vishwakarma Magnets)
78-Tejendra Estate, Opp CMC, Odhav Road, Ahmedabad, Gujarat - 382415, India
Share us via
