Shree Bhagwati Mechtech ( india) Pvt. ltd. advanced high efficiency automated tablet coating machine is mainly used in pharmaceutical and food industries. Featuring mechatronis and confirming to the requirement of cGMP. It is a high efficiency, energy saving, safe and clean equipment for film and sugar coating of tablets, Pills and candies with organic film, aqueous coating and sugar film etc.

• Film Coating with organic solvent, Enteric Coating and aqueous coating
• Sugar Coating

The tablet to be coated make continuous complicated orbital motion the closed rotating Drum under the action of a streamline of Baffles. During the motion coating medium automatically sprays according to the technological process and rational technological parameters, at the same time hot filtered air supplied under a negative pressure. The hot air penetrates through the tablets core layers and is discharged from the bottom of the layers, so that the coating medium sprayed on the surface of the tablet cores will dry rapidly and evenly, thus forming a solid and smooth surface film on tablet. The whole process is finished under the automatic by PLC Controls with touch screen Interface.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Fully automatic film & sugar coating process by PLC Controls with HMI Touch screen.
• Flexible batch operations.
• Complete separation of production and technical area.
• Extremely user friendly software and operation through PLC.
• The machine structure made from S.S.304 quality fitted with Closed Drive, Perforated Pan, Washing sink, Inlet air plenum, Exhaust air plenum with Air tight door.
• Excellent mixing and tumbling by special design of removable on each sloping face of the pan and anti sliding baffles provided on perforated diagonal face.
• Perforated Pan having variable speed through AC frequency Drive.
• Pan mouth closed with Stainless steel door with a glass for process visualization.
• A stainless steel 316 sinks at bottom of pan for collection of powder with necessary stainless steel piping with tri-clover joints for ease of cleaning during the changeover.
• FLP Fluorescent Light is provided for illumination inside the pan.
• All doors, safety guards and covers are provided with a silicon food grade seals.
• Automatic Spraying systems provided with Atomized spray Gun, Adjustable spray gun arms, High precise flow peristaltic pump, solution holding tank with pneumatic stirrer.
• Front Entry stainless steel arm, with facility to adjust the angle of spray guns is provided.
• Inlet air and Exhaust air plenum provided with silicon seal with easy removable for cleaning.
• Inlet air and outlet air will be controlled by pneumatic operated damper which is provided on top of the machine and at inlet and outlet duck.
• Inlet air and Exhaust air flow controls through AC Frequency drive of both blower.
• Inlet Air handling unit made from double screen insulated with puff with inside stainless steel 304 quality and outside powder coated.
• The Inlet air handling units fitted with Pre filter- 10 micron, Inlet air blower with motor, Dehumiditifier- child water circulation coil, Stainless steel 304 quality Steam/ Electric heat exchanger with fins, Final filter with 5 micron, HEPA filter -0.3 micron.
• Exhaust Air handling unit provided with dust collection system with 5 micron filter or wet scrubber and exhaust blower. The Exhaust air dust collector unit is made from .S.S.304 Quality.
• Treatment of exhaust air for pollution free operation.
• The Entire Inlet Air handler and Exhaust air unit to be install in technical service area.
• Tablet discharging facility will be through the special diverter assembly.
• Advanced CIP /WIP System is provided for pan internal by spraying ball and outer washing by spraying nozzle both side. The complete system will operate and controls through machine PLC for washing cycle for Plain water, Detergent, Hot water, Distilled water and Drying by air.
• All motor are flam proof/ Explosion proof provided.
• Advance PLC Controls system with HMI- color Touch screen provided of Allen Bradley/ Siemens make for complete automatic coating process and batch data receipt management . Also option for SCADA connectivity with FDA 21 CFR part 11.
• The machine instruction manual and Validation document provided for DQ, FAT, IQ, SAT and OQ with test and calibration certificate.

• Interchangeable Pan.
• Solid Pan for confectionery products.
• Wet Scrubber.
• Dry Dust Collector.
• Dehumidifier.
• Steam or Electric Heat Exchanger.
• Tablets charging by bin loader.
• SCADA Connectivity.

De-Duster is pharmaceutical processing equipment that removes the fine surface dust from tablets through using vibratory effect. This machine can be linked directly to any type of high speed tablet press.

In spiral deduster there is vibrated spiral path perforated sieve. The tablets enter in centre of perforated sieve from directly Tablet Press then they are gently vibrated and the tablet to move forward, turning and rotating along the spiral path of perforated plate to outer peripheries. In Elevating Deduster there is vibrated up hill type sieves. The tablets enter bottom inlet of perforated sieve from directly Tablet Press then they are gently vibrated and the tablet to move forward, up ward , turning and rotating along the spiral up hill path of perforated plate to outer at top of the sieve.

These remove the layer of surface dust and edges of tablet. The dust is collected by a dust extraction system through a hose pipe spigot connection and the tablet fall into the container.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Geometrically designed tablet route to ensure remove dust and burrs.
• Easy to install with all types of Tablet Press with inline metal detector.
• Option for Spiral OR Elevating-Up hill type Deduster.
• Adjustable height.
• Easy to mobility.
• Easy and simple dismantle for cleaning of all contact parts.

Preparation vessels, Reactor and storage tank and has consolidated a process as customer needs.

• Design compliance with cGMP.
• Capacity up to 25, 000 Liter.
• Product Contact AISI 316L .
• Vertical & Horizontal design.
• Atmospheric, Vacuum or Pressure Operation.
• Plain, Jacket for heating & cooling.
• Option for Heating by steam, hot water or tharic fluid oil & Electric heater.
• Thermal Insulated.
• Mechanicals or Electro polishing of internal surface.
• Welded, flanged or hinged type cover.
• Integrated Cleaning in Place-CIP.
• Sterilizing In Place-SIP as an Option.
• Option for mounting on legs or flange.
• Portable execution on request.
• Validation protocols & Instrumentation celebration.

• Agitator can be top or bottom driven or magnetically driven.
• Propeller type, Anchor type provided with High speed disperser or rotor-stator homogenizer.
• Single or double mechanical seal.

• For production, filtration, transfer and storage solution.
• Pre reparation vessels.
• Inline homogenizer.
• Inter Connecting Pipe.
• Solid or sugar Charging System.
• Working Platform.

• Controls of all function by PLC Controls with HMI Touch screen.
• Level controls by means of capacitance probe or electronic load cells.
• Digital indication and controls of all process parameters for Process time, agitator speed, temperature, pressure & level.

The IPC Bin loader is used for transferring and discharging the material dust free and without human touch in pharmaceutical industries for Load powder in to HSMG bowl, hopper of tablet press, Container of blender, Load tablet in to hopper of blister pack & Coating Machine and as well as used for online sifting and milling.

The IPC Bin Loader consists of a main frame, Bin fixing arm, Hydraulic lifting device and pivot base. This main frame move 360 degree on axis and Bin fixing arm move upward and downward in the frame by hydraulic cylinder and power pack system. The moveable container/Bin bringing placed beneath the fixing arm, operate the hydraulic drive system which lifts arm with the container and it raises the container till it gets stops exactly in a position, slew the column to swivel the bin over inlet of the next processing equipment, then it could be unload by opening of butterfly on the whatever next processing equipment.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Capacity available 30 Kg to 600 Kg.
• Suitable for inline process with Milling and Sifter.
• Suitable for load material on High shear mixer, Blender, Tablet Press, Autocoater & Blister Pack Machines.
• 360 degree Swiveling movement of lifting arm.
• Loading height designed as per end user requirement and slab hight.
• Structure cladding is S.S.304 quality and matt finished.
• Hydraulic power pack system for lifting.
• If the power goes off, the loader remains where it was.
• Limit switches are provided to stop the hydraulic drive when the stroke is competed.

Conventional coating machine are used to sugar coat tablets, pills, etc in for a variety of industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds.

The product is to be filled inside the pan. During the rotation motion, coating material is sprayed by spraying system according to the technological process and rational technological process. So process materials (product) are coated due to rotating pan. The coating round pot is rotated by variable speed. At the same time hot air is supplied through inbuilt Hot air blower system which dries rapidly (heating or cooling) and evenly thus forming a solid and smooth surface.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316/304 & non contact parts AISI 304.
• Conventional coating system for manual film coating and sugar coating.
• Machine is designed with fabricated structure fitted with SS enclosure which makes simple, cleanable outside covering and mounted on anti vibration pad.
• Closed powerful pan drive with reduction gearbox and motor by variable speed pulley.
• Movable hot air blowing system with electric heater.
• Easy to replace polishing pan and other size coating pan.

• A.C. frequency Drive for pan.
• Fixed or detachable type baffles.
• Interchange different size Pan & Polishing Pan.
• Atomized Spraying system with Spray Gun, Peristaltic Pump and Solution tank and Electro Pneumatic controls.
• Pressurized vessel with spray gun.
• Flame Proof Electrical.
• Pellegrini type Coating machine.

• Overload pressure release mechanism.

Polishing machine Bhagwati - 1 Model is used after capsules are filled for cleaning the powder attached on the capsules surface.

• Design as per stringent cGMP requirements.
• All Contact parts of AISI Stainless Steel 316 Quality.
• All Non contact parts of AISI Stainless Steel 304 Quality.
• Longer brush clean the dust on capsule.
• Excellent performance, excellent balances, low noise, and trouble free.
• Non - Scratch capsule.
• The inclination of polishing barrel and adjustable brush speed (adjust treating time for capsule polishing).
• Easy for cleaning and maintenance.
• Applicable to all size of capsules (#) 00, 0, 1, 2, 3, 4, 5.
• No need of change parts for all the size of capsule.

We are glad to introduce ourselves as manufacturers of Self Adhesive labels Rolls . We combine our past experience of 20 years in Pre-Press with professional team of labeling and labels experts to fulfill any labeling requirement. Our labeling solutions are at par with the best in the world with High Speed NILPETER (USA) servo flexo combination printing machine , capable of printing with UV as well as Water Based Inks. We offer high quality world class labels in all types of substrate such as Paper, PP, PE, clear on clear with eight colors printing and value additions to your label such as Inline coating/Varnish, Emboss effect, Perforation, Cold / Hot foiling, Lamination, Reverse printing and many more. We assure high quality, most attractive & cost effective labels for industries such as Pharmaceutical Self Adhesive labels Rolls, FMCG Self Adhesive labels Rolls, Liquor Self Adhesive labels Rolls & Beverage Self Adhesive labels Rolls, Apparel Self Adhesive labels Rolls & Textile Self Adhesive labels Rolls, Chemicals Self Adhesive labels Rolls, Lubricants Self Adhesive labels Rolls, Airlines Self Adhesive labels Rolls etc.

The stand alone label applicator machine is mainly utilized for labeling a product in bulk quantities on the conveyor lines. It has a powerful sensor in order to detect the product when it moves down from the conveyor, and thereby activate the application of the label at the appropriate time. Moreover, the product should be properly handled and must also be firmly controlled in order to assure that the label is perfectly placed on the product.This sophisticated label applicator machine is also well synchronized with all the other functions of the machine, such as product feeding, roll winding and label dispensing for enabling precise and optimum labeling. Further, it even provides the facility of online changing the labeling speed, with the help of a single speed point available on the control panel.

This high speed model SB LABEL 01 of the stand alone label applicator has the capacity to deliver an output of up to 250 products in just one minute. The diameter of the inner roll is 75 mm and the outer roll diameter is 300 mm. It also includes an exceptional single point synchronized speed control system; and an inherent A.C. frequency drive system. Besides this latest label applicator machine even has an automated system for detecting the length of the labels. Thus the user does not have to manual feed and store the data related to the label length in to the memory of the equipment; and also retrieve the same details, whenever the label size is changed and even when the machine is restarted. This elegant system thereby results in saving your time, prevents down time of the machine, and also reduces the cost, and assists in achieving higher production. In fact it is regarded as an ideal machine, since it meets the diverse needs of the current market.

The disintegrating milling machine (for partition/cutting of dry leaf & stem) is designed for high speed milling, cutting, grinding and pulverizing of hard particles, herbal, dry and wet material milling and especially suitable for herbal products.

The product is poured to centre of the blade from the top through in feed hopper and material centrifugal on the rotor blades beater assembly for milling or pulverization. Due to the slotted shearing edges mounted on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening. The disintegrating milling machine is designed and fabricated for tacking heavy load without vibration on high speed there for any type of herbal hard material can be milled on the disintegrator.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• High Speed milling on 4500 RPM.
• Output of the machine 200 to 800 Kg / Hour.
• The chamber is completely fabricated from 10 mm thick Stainless Steel.
• Half round toothed plate fitted in side the chamber for more high shearing edges.
• Dynamic balanced beater assembly bearings are in a separate pillow block at outside chamber.
• Wide range of sieve of perforated.

The spraying system used for atomized film coating of tablet on conventional coating in pharmaceuticals food, Agro chemical and confectionery industries.

The spraying system is consists of Atomized spray nozzle, High Precise Peristaltic pump, Stand for Gun, Solution holding tank and automatic controls system. The complete system is work on based on auto coater machine technology for film coating.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Automatic spraying system for tablet film coating on conventional coating.
• Easy to moveable and dismantle for one machine to another machine and for cleaning.
• Easy to controls to atomized spray and flow of liquid.
• Automatic Coating System is Consists of
  • 1. Solution holding tank.
  • 2. Peristaltic Pump
  • 3. Atomized Spraying Gun
  • 4. Adjustable Stand for Spraying Gun
  • 5. Automatic Electro Pneumatic Controls Panel.
• The system is available with one or more than spraying nozzle as per coating pan size.
• Solution holding tanks can be different capacity and with and without stirrer.

The Tippler-Lifting and tipping device is a hydraulic device which is having an arm used for lifting and turning FBD bowl by 180. Thus it is used to unload fluid bed dryer bowl material in to Cone mill OR Multi mill OR Oscillating granulator in a dust free way for down sizing or dry milling. The operation is completely dust free and eliminates manual handling or scooping.

The FBD Bowl is placed beneath the Tipper. The inverted cone of the Tipper is lowered so that the brim flange of the bowl touches the inverted cone. Both are clamped together with quick fixing clamps. The whole assembly is raised.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Capacity available 30 Kg to 600 Kg.
• Unloaded material with inline process with cone mill, granulator with IBC Bin for dust free process.
• Fully automatic system, with hydraulic lifting and tipping arrangement for quick and easy handling.
• Eliminates tedious and unhygienic manual handling of products.
• Tilting arrangement with a single point pivot ensures GMP with ease of operations.
• 180 degree swiveling of vertical mast with vertical lift and tippling ensures motion in all three dimensions as required.
• Discharge cone is fitted with a 250mm diameter butterfly valve at bottom with silicon rubber seat. Can be provided with pneumatic actuator for opening or closing butterfly valve without reaching for it by pneumatic controls.
• Hydraulic power pack can be mounted over the service floor so the column of the tipper acts as pendent and through the hollow pivot shaft, hydraulic lines along with electric cables can travel above the working area slab.
• Suitable view glass window provided on the conical tapering portion of the tipper, which acts like a view window.
• Stainless steel lift yoke with integral rotation drives for rotation of discharge cone and container.

Vacuum Homogenizer Mixer is applicable for a wide variety of viscosity product, i.e. emulsions and semisolid. It integrates with pressure, heating, cooling and vacuum for Agitating, Mixing, Emulgating, Dispergating, Suspending, Homogenizing & agglomeration functions into single machine.

Two low speed agitator; Counter rotating mixer with outer anchor stirrer with self pressure Teflon scrappers and contrs rotating inner paddle blade.

Ultra Mixer is a combination of counter - rotating inner paddle agitator and outer anchor agitator, generating a disturbance in the normally circular flow pattern and dampens vortex formation. The blades of paddles are pitched to promote top - to bottom flow. In addition, self adjustable scrapers are utilized to prevent the build-up of a stagnant film between the agitator and the vessel, and assure efficient heat transfer to product during heating and cooling steps.

Toothed rotor/stator type Homo disperser, locates at the bottom of the vessel, accomplishes emulsification by physical action and centrifugal forces created by high speed rotation of the rotor. These actions would break up oil phase/ aqueous phase liquid stream into tiny and discrete droplets.

• Design compliance with cGMP
  • Integrated Cleaning in Place-CIP.
  • Sterilizing In Place-SIP as an Option.
• Batch Size
  • Available model 10 Liter to 6000 Liter working Capacity.
• Materials
  • Product Contact AISI 316L.
  • Food Grade silicon rubber for seal.
• Water Phase Vessel
  • Jacket for heating & cooling.
  • Vacuumize process.
  • Vessel Inside Pressure (-1 /+2 Bar)
  • Heating Jacket Pressure (-1 /+6 bar)
  • Tilting vessel up to 500 Liter.
  • Heating by steam or hot water circulation.
  • Direct cooling with water.
  • Temperature controller & safety pressure Valve.
  • Bottom discharge with valve.
• Agitator mixer with scrapper
  • Mixing flow top to bottom in vertical axis.
  • Outer Anchor agitator with paddle with 45C.
  • Inner paddle agitator with 45C.
  • Teflon scrappers on outer agitator.
  • Scrapper cleanly working on both side.
  • Optimize heat transfer.
  • RPM steplessly with variable speed drive.
• High speed Homogenizer
  • Toothed Rotor - stator type.
  • RPM steplessly with variable speed drive.
  • High shear & pressurization of the homogenizer.
  • Thus homogenization of high viscosities up to 400.000 mPas.
  • Homogenizer mounted on lower position in the centre of vessel.
  • Can be homogenization in circulation.
• Top Lid
  • Motorized top lid for lifting & lowering.
  • Safety Interlock process with limit switch.
  • Connection for Vacuum, Charging, Eye glass window, Light glass, CIP, SIP, Pressure gauge & safety valve.
• Vacuum System
  • Water Ring Vacuum Pump.
  • Vacuum gauge & Vacuum relief valve.
• Machine Structure
  • Rigid modular structure with AISI 304.
  • Mounting on Anti vibration pad so, No foundation require.
• Controls & Visualization
  • Electric Controls with digital display.
  • Optional PLC Controls with HMI Touch screen.
  • RPM and Process time entries.
  • Temperature controls- Heat/cool.
  • Vacuum start- Stop.
  • Integrated Data Recording for batch.

• Emergency stop button
• Safety vacuum relief valve & Indicator Gauge.
• Safety Pressure Valve.
• Limit switch at top lid

The conveyor belt brings the container or products from the labeling/blister/strip machine, These bottles/products operators in turn pick up the bottles/products & visually inspect the bottles/products & doing necessary action like primary packing, secondary packing, picking & placing at proper place.

The Packing conveyor belt is having stainless steel Table Top with moving Endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe & supported on adjustable height bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection & packing into the box. Conveyer belt speed can be very as per requirements by variable frequency drive. The belt is drives through gear motor with two roller assembly.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• Machine structure is made from AISI 304.
• Belt-alignment system for long life & striate running of belt.
• Endless sandwich belt with direct gear drive.
• Length & width of belt can make as per customer requirement.
• Both side working platform- 12' size.
• Adjustable height of conveyor belt to align with other machine
• Self-alignment bearing for easy maintenance.
• Rigid Vibration free Construction for trouble free performance.

• AC Frequency drive with variable speed.
• Castor Wheel with lock.

The Packing conveyor belt is having stainless steel Table Top with moving Endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe & supported on adjustable bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection & packing into the box.

The conveyor belt brings the container or products from the labeling/blister/strip machine, These bottles/products operators in turn pick up the bottles/products & visually inspect the bottles/products & doing necessary action like primary packing, secondary packing, picking & placing at proper place.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• Automatic conveying of goods for packing.
• PVC and endless belt for long life.
• Structure is made from AISI 304 with matt finish.
• Belt-alignment system for long life & striate running of belt.
• Direct gear drive with variable speed drive.
• Adjustable height of conveyor belt, to align with other machine of the line
• Self-alignment bearing for easy maintenance.
• Rigid Vibration free Construction for trouble free performance.

• Castor Wheel with lock.
• Extra end table at end of conveyor.
• Special type adjustable angle at Initial of conveyor for strip or blister packing.
• S.S. chain instead of PVC belt.
• Flame proof Electricals.

The paste kettle is designed for preparing paste / starch / binder solution for making granules for tableting formulation and granulation . It has a universal application resulting in uniform melting.

The kettle has a small cylindrical top shell with a spout for pouring out binder mass. It is provided with Anchor type beater for paste mixing with dual speed option.

• Capacity available in 50 Liters to 300 Liters.
• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Product Bowl with Jacketing and Insulation for heating.
• Tilting unit for unloading.

• Heating Option: (1) Steam Heated (2) Electric Heated with tharmic fluid.(3) Pressurized hot water
• Temperature controller with sensor.
• Anchor stirrer with Variable speed.
• Pillar design kettle with anchor stirrer.

• Total drive transmission system enclosed
• Limit switch installed in the top lid ensure lid is closed
• Overload relay Protection.

Automatic Rotary Multi Head Cap Sealing Machine works with Nos. of rotary head to cap sealing. It is used to cap sealing of bottle in pharmaceuticals, food, dairy, agro chemicals and Beverages industries.

Automatic rotary multi head cap sealing Machine is versatile, self-supported on stainless steel structures. The machine is precision built with rotary head with drives for sealing. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body. Main drive of the machine, conveyor drive & cap-feeding bowl consist of motor with synchronized variable Drive and No container No Sealing system arrangement.

Containers are feeds from filling machine or unscrambler and moves on SS Slat conveyor and star wheel bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of threading & sealing and move container further process for inspection, labeling or packing.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• Machine structure is made from AISI 304 with matt finish.
• Adjustable height of conveyor belt, to align with other machine of the line.
• Sealing pressure can be adjusted for different size of caps and gauges.
• Universal coupling for quick and easy setting of In-feed worm
• No container no cap system.
• Low noise level, low power consumptions.
• Self-lubricating UHMW- PE guide profile for low friction wears surface, smooth and noiseless conveying.
• Adjustable bottle height gauge for easy and quick setting.
• Outside cap feeder system as per cGMP norms.
• Minimum and maximum level of cap in chute to be maintain through sensor hence to avoid damage & rubbing of cap.
• Inching system provide for setting of sealing operation.

Tube Filling Machine is an used for fills of ointment, cream, tooth paste, gel and semi solid materials in aluminum or in plastic tube and sealing of the tube. Application of the machine is in pharmaceuticals, cosmetics, foods, adhesive, paint, chemicals and others industries. Tube filling and sealing machine is designed with filling and sealing process to be completely untouched and single machine process. The unit comes in various batch capabilities to handle a large range of tube sizes and shape by change of parts. Tube filling machine is equipped with high accuracy filling systems, provides clean and accurate filling at optimum speed providing high quality and product.

Tube filling machine is have tube holding cups and manually tubes are positioned in cups and then fills, seals and ejected to discharge hopper. Filling volume can be easily adjustable as per desire weight and there are sealing option for aluminum tube by folding & crimping device and PVC tube seal by thermo heat sealing device. After sealing of tube then coding can be do on sealing area by coding device. Before filling tubes are to be clean by compressed air for removes of dust.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304.
• Completely fully automatic operations for filling, sealing & discharge.
• Tubes are manually load in cups.
• Simple Mechanism & Operator Friendly Machine.
• NO TUBE-NO FILL device.
• Charging Hopper is provided with jackets for heating and agitator assembly.
• Cup holder is made from nylon materials.
• Filling change parts for (1) 1 to 5 ml. (2) 10 to 50 ml (3) 50 to 100 ml.
• Air blow system for tube cleaning.
• Synchronize variable speed drive for rotary head and filling head.
• Folding & Coding at Individual Station.

Automatic Double head Auger type powder filler is a versatile filling machine ideal for non-free flowing, fluffy & sticky powders in bottles. e.g. Pharmaceuticals powder, talcum powder, tooth powder, custard powder, pesticide powders, ground spices etc.

Automatic double head dry powder auger filler utilizes the principle of positive displacement of screw. Precisely designed augers are displaces product through funnels and containers convey by conveyor belt. There are two separate filing head mounted on top plate with pillar and inline filling station with conveyor. Initial first fill single bottles at first filling station and after that both filling station fills bottle together by controls system and bottles holding system is designed to moves two filled bottle together.

Dry bottles are fed through turn table to conveyor belt and flat conveyer feeding bottles to filling heads on sets speed and bottles stop and hold for filling station. Sensor gives signal to electromagnetic clutch start to rotate augers for filling. It will fill desire quantity of powder in to the container through auger. An auger filling times precisely sets on desire requirement by timer controls and speed of auger can be set by variable speed drives. After filling of bottle pneumatic cylinder unhold bottles and move forward to further process on conveyor.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304.
• Double head auger filling with conveyor for fast production.
• Easy changeover for different pack sizes.
• Filling weight easily sets by timer of auger.
• Versatile Agitator Mechanism ensures continuous flow of products, to the Auger.
• "No container No filling" Systems.
• Filling and conveying speed adjustable through variable speed drives.
• Pneumatic operated bottles holding system.
• Simple Construction assists maintenance and cleanliness.OPTIONAL FEATURES :
  • PLC Controls with touch screen
  • Servo motor controls.
  • High & low level powder sensor in hopper.

Strip packing the versatile design of the machine makes it eminently adaptable for packaging a variety of products like pharmaceuticals Uncoated and coated tablets, soft gelatin capsules, hard gelatin capsules, confectionery products, chewing gums, toffees, Buttons, pins, ball bearings, rubber and plastic products, electronic components, ball-pen refills and many more.

Strip Packing machines are designed to handle a wide range of products with utmost precision and speed upto 2400 units per minute. The products from the hopper passes through a stainless steel feeding system and goes to sealing roller cavities where laminated foils, drawn from two rollers, packs and seals the products in a continuous strip. The strip then passes through vertical and horizontal cutter assemblies to deliver the desired sizes of strip packages.

• Completely fully automatic liquid / oral manufacturing plant with fully automatic operations and designed as per cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304.
• Available in different models of 2, 4, 6, 8, 10 and 12 Tract, capacity from 400 to 3000 tablet minimum with maximum sealing width of 250 mm.
• Standardized, quickly interchangeable parts.
• Compact steel fabricated body with adequate inspection windows.
• Adjustable foil cutting and slitting device. Noiseless, trouble-free smooth operation.
• Vibratory feed control for higher output.
• Cavity shape and knurl design of choice.
• Cartridge type heaters and thermostatic temperature control suitable for all types of packing materials.
• Ensures air tight leak-proof packing.
• Suitable for most heat sealable foils like Paper Poly, Aluminum Poly, Cello Poly, Cellophane, and Glassine Poly.OPTIONAL FEATURES :
  • Performing rollers to pack coated tablets, capsules and caplets for economy of packing material.
  • Conveyer belt as per requirement.
  • Disc feeding system for odd shaped products.
  • Electric temperature control system with indicator to read foil sealing temperature while machine in use.
  • Strip counter and Batch coding attachment.
  • Pusher mechanism for feed chute.
  • Flame proof Electricals.
  SAFETY FEATURES :
  • Protective Grill in front.

The Laboratory Mixer is designed for uniformly mixing of dry and wet material and especially suitable for Pharmaceutical, Food and chemicals industries.

The mixer consists of a rigid fabricated structure motor, gear box, mixing drum, stirrer and tilting device. The mixing drum complete with stainless steel body, stirrer and tilting device. The mixing drum complete with stainless steel body, stirrer and sealing arrangement. The drive of mixing paddle is through suitable gear box and motor. The tilting device is provided to make easy the unloading of the material and easy cleaning of the mixing drum. The Mixing stirrer can be provided different shape Ribbon type / Paddle type according to machine.

The material under mixing process can be monitoring through acrylic dust cover and its controls dusting and contaminations. The hinged features allow flexibility of adding solution through cover during in operation. The acrylic dust cover is so interlocked that ensure container is totally closed.

• Design as per stringent cGMP requirements.
• All contact parts SS 316 quality.
• Container capacity 10 Liter/5 kg.
• Tilting device for easy unloading cleaning.
• Self adjusting sealing arrangement to avoid entire black particles.
• Uniform Wet and Dry mixing.
• In locked safety mixing process.
• Option for different blade, Mass mixing blade, Paddle blade and Ribbon Blade.

Automatic Air Jet Cleaning Machine inbuilt Unscramble is a compact unit used for cleaning of Dry Syrup pat bottles before filling.

This machine works on a principle of back pressure of Bottle which will be fed by the unscramble to reach separator assembly, which transfer the Bottle on conveyor belt and pushes bottle to the cleaning section one after another. Machine consists of two inverters and one cleaning section. Bottle will be pushed by rotating separator towards the in feed inverter, which makes the Bottle in the wrong direction and push it to cleaning section through back pressure of other Bottle.

Cleaning section is equipped with continuous vacuum system. Bottle reaches to the cleaning section, a pair of nozzle starts to flush the air inside the neck of the Bottle and simultaneously vacuum will suck the particle, disturbed by the air. Then Bottle passes to another inverter, where changes the direction to the right direction, further Bottle moves either to the filling machine.

• Design as per cGMP - Current Good Manufacturing Practices compliance
• Made from AISI 304 and diverter assembly EDPE.
• Positive air pressure and vacuum cleaning.
• Easy operation for setting, change over& cleaning.
• Stationary S.S. nozzles.
• Automatic loading and unloading of container.
• Individual control for air pressure and vacuum cleaning.
• S.S pressure meter
• High capacity blower suck the minute particle from bottle, ensure good cleaning of bottles.
• Variable speed with higher output.
• Single gear motor synchronizes conveyor, star wheels and sealing head.
• Acrylic Cabinet with Aluminum Structure for machine.
• Can be provided In feed Turn Table.

TheShree Bhagwati Mechtech (India) Pvt.Ltd. compact NewLABOcoata- Lab Auto Coater is high efficiency and intelligent automated film & sugar coating advance technology is mainly used in pharmaceutical and food industries. Featuring mechatronis and confirming to the requirement of cGMP. It is a high efficiency, energy saving, safe and clean equipment for film & sugar coating of tablets, Pills and candies with film - organic solvent and aqueous coating.

The tablet to be coated make continuous complicated orbital motion the closed rotating Drum under the action of a streamline of Baffles. During the motion coating medium automatically sprays according to the technological process and rational technological parameters, at the same time hot filtered air supplied under a negative pressure. The hot air penetrates through the tablets core layers and is discharged from the bottom of the layers, so that the coating medium sprayed on the surface of the tablet cores will dry rapidly and evenly, thus forming a solid and smooth surface film on tablet.

• Designed strictly compliance with the stipulation of cGMP.
• Product contact parts AISI 316/ 316 L Quality.
• Complete automatic coating processes with advanced PLC Controls with HMI touch Screen.
• Perforated coating pan with mixing baffles, anti slide ribs and variable speed by VFD.
• Enclosed pan drive through reduction gear box and motor.
• All doors, safety guards and covers are provided with a suitable food grade seals.
• The perforated pan has a suitable mouth opening for tablet Charging and Discharging which provided with stainless steel cover and a glass window for process visualization.
• Front Entry stainless steel arm, with facility to adjust the angle of spray guns is provided.
• Atomized Spraying system with solution holding tank, peristaltic pump, atomized spray gun and auto electro-pneumatic spraying controls system through PLC
• Inbuilt Inlet Air handler with blower, electric heater, 20 & 5 micron filter & 0.3 micron HEPA.
• Inbuilt Exhaust air blower with 20 micron filter.
• Inlet air flow and exhaust air flow can be adjusted through VFD of blower.
• Differential pressure indicator for pan and HEPA filter.
• WIP/CIP system for easy cleaning
• Option for Interchangeable pan.

• Explosion proof electric motor.
• Auto shutoff system for over limit temperature/ heating & Auto stop when process is completed.
• Air pressure switch installed to ensure pressure is in limit.
• Differential pressure indicator for HEPA Filter.
• Overload relay controls.

Dust laden air enters the collector through an expansion chamber, where heavy dust particles are deposited by gravity. The fine dust passes upwards through single large orifice and is finally collected by filter. There is an effective snap action shaking mechanism for shaking filter and dust is deposited into drawer type tray. There is a large door for changing filter bag and cleaning of the machine.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Easy to connect all types of Tablet press and De-Duster.
• Dynamically balanced blower.
• Easy mobility.
• Also we designed special type dust collector and extractor as per customer requirement.

A Centrifuge is efficient machine for Liquid Solid separation and centrifugal filtration/ fluid clarification in various industries such as Pharmaceutical, Bulk Drugs, API, Chemical, Textile, Herbal, Oil & Sugar Industries.

The centrifuge is a simple device usually driven by a motor that woks on the principle of sedimentation. Objects in a centrifuge are rotated around a fixed axis, thus applying a force perpendicular to the axis. The sedimentation principle uses the centripetal acceleration to evenly separate substances of varying density. Centrifuges can be divided or categorized on several bases such as manual top discharge, Lifting bag type and reversing filter bags with 3 point or 4 Point suspension and front charging & Pusher type.

• Design is cGMP with all contact parts AISI 316.
• Centrifuge is used for separating liquids from solids and centrifugal filtration/ fluid clarification.
• It is offered in basket sizes of 24" 36" 48" & 60".
• Centrifuges offered in different model
  • 1. Heavy duty three point or four point suspension with under driven baskets.
  • 2. Front loading & discharge with horizontal driven basket.
  • 3. Pusher type centrifuge.
• These machines are available with top discharge, bottom discharge or bag lifting type.
• Filter cloth is available in the desired strength and micron size.
• The fabric with poly- propylene, woven / non woven polyester, nylon, cotton etc.

Automatic Air Jet Cleaning Machine inbuilt Unscramble is a compact unit used for cleaning of Dry Syrup pat bottles before filling.

This machine works on a principle of back pressure of Bottle which will be fed by the unscramble to reach separator assembly, which transfer the Bottle on conveyor belt and pushes bottle to the cleaning section one after another. Machine consists of two inverters and one cleaning section. Bottle will be pushed by rotating separator towards the in feed inverter, which makes the Bottle in the wrong direction and push it to cleaning section through back pressure of other Bottle. Cleaning section is equipped with continuous vacuum system. Bottle reaches to the cleaning section, a pair of nozzle starts to flush the air inside the neck of the Bottle and simultaneously vacuum will suck the particle, disturbed by the air. Then Bottle passes to another inverter, where changes the direction to the right direction, further Bottle moves either to the filling machine.

• Design as per cGMP - Current Good Manufacturing Practices compliance
• Made from AISI 304 and diverter assembly EDPE.
• Positive air pressure and vacuum cleaning.
• Easy operation for setting, change over& cleaning.
• Stationary S.S. nozzles.
• Automatic loading and unloading of container.
• Individual control for air pressure and vacuum cleaning.
• S.S pressure meter
• High capacity blower suck the minute particle from bottle, ensure good cleaning of bottles.
• Variable speed with higher output.
• Single gear motor synchronizes conveyor, star wheels and sealing head.
• Acrylic Cabinet with Aluminum Structure for machine.
• Can be provided In feed Turn Table.

Basket Extruders have proven successful in many industries, including pharmaceutical, agricultural chemicals, and inorganic chemicals among others.

• Forming pharmaceutical extrudates prior to Spheronization pellets for controlled release applications.
• Production of water dispersible and water soluble granules of agriculture chemicals.
• Granulation of confectionary products prior to Tableting.
• Densification of organic chemicals.
• Formation of free-flowing vulcanization compounds

Basket Extruder provides the lowest pressure method of wet extrusion combined with moderate sheer. To form granules from 0.5 to 5.0 mm in diameter our basket extruders provide a very versatile means of wet extrusion. They produce consistent extrudate from wetted powders at laboratory through multiple ton per hour extrusion capacities.

In the upper chamber of our basket extruders the counter rotating internal breaker bar system breaks larger clumps of wetted feed material to allow gravity to convey the wetted mass down into the bottom extrusion rotor arms which, in turn, densifies the material and extrudes it through the screen basket. Formed extrudates are discharged without damage by our proprietary discharge chute design.

Product extruded with basket extruders has a stable structure with a large surface area which provide the optimum pliable properties for spheronization.

Basket Extruder models are available with capacities from bench level scale to over 3, 000 Kg/hr. Separate basket extruder designs for pharmaceutical and industrial applications are available. All extruder models are easily cleaned and have appropriate shaft seals protecting the feed material from contamination. All process wetted components are made available per FDA or industrial requirements. Metallurgies include: 316L, 316, 304, as well as more exotic metals

• High speed mixing & granulating.
• Adjustable angle and gap between rotor blades and basket screen allows optimization of extrusion force.
• Short active extrusion path minimizing temperature rise for heat sensitive actives.
• Narrow particle size distribution.
• Very high capacities up to 3, 000 kilograms per hour.
• Screen sizes from 0.5 to 5.0 mm.
• Extrudates well suited for Spheronization.
• Appropriate electrical panels and drives for explosion proof operation.
• Simple free falling discharge.
• Adjustable wiping blades.
• Internal counter rotating breaker bar keeps material from sticking together.
• Safety switch prevents operation when screen removed

• AC variable frequency drive for accurate control.
• Explosion proof electrical are available.
• CGMP, Food, or Industrial design.
• 316L, 316, 304 Stainless Steel process wetted parts.

Planetary Mixer is ideal for mixing of wet/dry powder materials. It has a homogeneous mixing action i.e. emulsions and semisolid. It integrates mixing, vacuuming, heating, cooling and homogenizing functions into single machine, resulting in a considerably reduction in cycle time. The basis of mixing system of Planetary Mixer is a combination of planetary- rotating paddle agitator. 2 Nos. Anchor type agitator with cross baffles rotates in anti-clockwise direction with planetary motion in there axis. While paddle revolves in clockwise direction with planetary action, generating a disturbance in the normally circular flow pattern and dampen vortex formation. The mixing blade and planetary action having dual speed. In addition, adjustable scrapers are utilized to prevent the build-up of a stagnant film between the agitator and the vessel, and assure efficient heat transfer to product during heating and cooling steps. The speed of the agitator and the counter paddle can be varied separately. The Product container is castor wheel mounted for easy load and unload to the machine. The top mixing blade assembly is motorized up and down during container loading and unloading. The mixing container is jacketed for heating / cooling and completely enclosed. The product container can be designed to operate under vacuum; mixing can then be performed without entrainment of air. Top lid of the product container having charging pot for binder adding, eye glass window and light glass.

• Designed strictly compliance with the stipulation of cGMP.
• Product contact parts AISI 316 Quality and Non contact parts S.S.394 Quality.
• Machine compact in designed single base structure to for simplicity in mounting.
• 2 Nos. Anchor blade with planetary rotation for extremely efficient shearing force.
• Top lid is mounted with motorized lifting device.
• Product container is castor wheel mounted for easy load and unload to the machine.
• Rigid drive with planetary gear and reduction gear box.
• Dual speed motor for slow and fast mixing action.
• Scrapper is made from Teflon.

• Ac Frequency Variable Drive.
• Mixing bowl with heating / cooling jacket and insulated.
• No. of Mixing Blade : Single Blade/ Double blade/Triple Blade.
• Type of Blade: Paddle Blade/ Anchor type/Hart Shape Blade.
• Centre located and top mounting high speed homogenizer .

• Emergency stop button.
• Limit switch at top lid.
• Over load protection by relay.

The Sigma Mixer is used for mixing and kneading for mixing, kneading of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, applications in Food, Rubber, Pharmaceutical, Chemical and agro industries, Dry powder to wet phase mixing. This mixer is most suitable for highly viscous material and dough like masses.

The sigma kneader is a double arm mixer, the two "Z" blade rotate towards each others at same or different speed inside a W- shaped product container. The twin screw basin kneading machine with two horizontally arranged kneading blades, which are deeply geared into one another and strip themselves reciprocally. Each blade moves the material in opposite direction thereby providing excellent cross mixing of all raw materials. The blades pass the trough walls and each other at close clearances resulting in good mixing. The close clearance produces a shearing and tearing action that is beneficial to the size reduction of solids. Selection of appropriate blade shape and speeds result in excellent mixing

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All Product contact parts AISI 316/ 316L & non contact parts AISI 304 or M.S.Painted.
• Mixing, Blending and kneading of high Viscosity Materials, with a combined action of Bulk Movement.
• Kneading, stretching folding, dividing and Recombining.
• High Mixing Precision, Short Batch Time, Problem free Cleaning and Residue Free Discharge.
• Automated mixing and granulating process in single bowl.
• Available in Capacity from up to 1000 Kg Industrial Productions.
• There are different types of blades: Sigma-"Z" blade, Spiral blade, and Naben blade.
• Selection of appropriate blade shape and speeds result in excellent mixing.
• Hydraulically lifting device with power pack for unloading.

• Jacketing Bowl for heating and cooling.
• Spraying system.
• PLC Controls with HMI touch screen.
• Flame Proof Electrical.

• Total drive transmission system enclosed.
• Limit switch installed in the top lid ensure lid is closed.
• Air pressure switch installed to ensure pressure is in limit.
• Limit switch installed at discharge to ensure product container underneath of discharge.
• Overload relay Protection and Emergency stop button.

The filter press is a solid liquid separation device using the principle of pressure feeding. It is highly efficient, compact, dewatering device for separating solids from liquid slurries in the form of compressed cake. It has wide range of applications by several industries like Pharma, bulk drugs, distilleries, beverages & other industries.

The unfiltered liquid is fed into the filter under positive pressure, where liquid travels in downwards direction and finds its way through opening on sides of the Filter Plates. As the liquid pressure increases, the Filter media holds the foreign particles and allows only clear filtrate to pass through the central channel formed by interlocking pressure cups to the outlet. Filtration is continued until the cake holding capacity of the unit is reached or until the filtrate rate becomes too slow owing to cake resistance.

• Design is cGMP with all contact parts AISI 316L.
• Complete filtration of the batch without any hold up due to reverse flow of liquid.
• The cake, filtered & solids remain totally enclosed allowing filtration of toxic, hazardous & explosive liquids.
• No contamination of internal surface of shell.
• The top dome structure ensures fast & easy removal of cartridge assembly & cleaning of cake.
• Skid type unit with castor wheel.

The Mass Mixer is designed for uniformly mixing of dry and wet material and especially suitable for powder of Pharmaceuticals, Food, Herbals, Agro Chemicals & Chemicals.

The mass mixer consists of a rigid fabricated structure motor, gear box, mixing drum, stirrer and tilting device. Specially designed self adjusting sealing arrangement of unique design is provided to ensure that no black particle enters into the mixing drum. The material under mixing process can be monitoring through acrylic dust cover and its controls dusting and contaminations. The tilting device is provided to make easy the unloading of the material and easy cleaning of the mixing drum.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Uniform Mixing with paddle blade stirrer.
• Self adjusting sealing arrangement to avoid entire black particles.
• Tilting device for easy unloading and cleaning.
• The interlocked acrylic covers of product container, enclosed drive & Overloads relay protection.

• Flame proof electric.

• Total drive transmission system enclosed
• Limit switch installed in the top lid ensure lid is closed
• Overload relay Protection.

Planetary Mixer is ideal for mixing of wet/dry powder materials. It has a homogeneous mixing action i.e. emulsions and semisolid. It integrates mixing, vacuuming, heating, cooling and homogenizing functions into single machine, resulting in a considerably reduction in cycle time.

The basis of mixing system of Planetary Mixer is a combination of planetary- rotating paddle agitator. 2 Nos. Anchor type agitator with cross baffles rotates in anti-clockwise direction with planetary motion in there axis. While paddle revolves in clockwise direction with planetary action, generating a disturbance in the normally circular flow pattern and dampen vortex formation. The mixing blade and planetary action having dual speed. In addition, adjustable scrapers are utilized to prevent the build-up of a stagnant film between the agitator and the vessel, and assure efficient heat transfer to product during heating and cooling steps. The speed of the agitator and the counter paddle can be varied separately.

The Product container is castor wheel mounted for easy load and unload to the machine. The top mixing blade assembly is motorized up and down during container loading and unloading. The mixing container is jacketed for heating / cooling and completely enclosed. The product container can be designed to operate under vacuum; mixing can then be performed without entrainment of air. Top lid of the product container having charging pot for binder adding, eye glass window and light glass.

• Designed strictly compliance with the stipulation of cGMP
• Product contact parts AISI 316 Quality and Non contact parts S.S.394 Quality.
• Machine compact in designed single base structure to for simplicity in mounting.
• 2 Nos. Anchor blade with planetary rotation for extremely efficient shearing force.
• Top lid is mounted with motorized lifting device.
• Product container is castor wheel mounted for easy load and unload to the machine.
• Rigid drive with planetary gear and reduction gear box
• Dual speed motor for slow and fast mixing action.
• Scrapper is made from Teflon.

• Ac Frequency Variable Drive.
• Mixing bowl with heating / cooling jacket and insulated.
• No. of Mixing Blade : Single Blade/ Double blade/Triple Blade.
• Type of Blade: Paddle Blade/ Anchor type/Hart Shape Blade
• Centre located and top mounting high speed homogenizer.

• Emergency stop button
• Limit switch at top lid
• Over load protection by relay.

The Vacuum transfer system is unique dry material transfer system for dust free and avoid to human touch. The vacuum transfer system is used in Pharmaceutical, Food, Agro Chemical, Sugar Industries and chemical. The system is use full for inline milling, sifting, blending, loading and unloading.

The principle of vacuum transfer has been proven to be a better way to move many types of material and a giant step over manual handling. The technology exists for moving virtually any material that can be pulled through a hose or tube. The system is consisting of Blower, Vacuum receiver system with filter, cyclone filter and Pipe.

The vacuum conveying systems designed specifically for the direct charge loading of blenders, mixers, sifter, milling, reactors or any vessel capable of withstanding a vacuum. The vacuum system can be provided mobile type with lifting provision to move one room to another room for loading and loading any machine.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Capacity available 100 Kg to 5000 Kg/hr.
• Can be used for transfer of products having bulk densities up to 1.0gm/cc.
• Total Discharge no Retention.
• No segregation or degradation of Product.
• No tool required for opening & cleaning.
• Transfer can be completely automatic to avoid the manual handling of the material.

The metal detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations in tablet. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worm sieve wires or splintered dies. This metal detector removes metallic contaminants automatically and without production interruption from a stream of tablets or capsules. A metallic contaminant in the product change the high frequency field within the detector coil, which in turn activates a reject flap by pneumatic solenoids. The metallic contaminant is reliably rejected with very little loss of material due to the extremely fast and short activation of the reject flap. The metal detector chute can be quickly and easily dismantled for routine cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet Press with Deduster Unit. Flexible operating height, angle and frame with lockable castor to allow for easy integration to any production facility.

The Metal detector incorporates a simplified and refined design of automatic Balance Coil Principle, which eliminates all setting up controls and permits long consistent performance.

• The Machine construction and components in accordance with cGMP standard.
• All contact parts AISI316 Quality and Non contact parts AISI304 Quality.
• Automatic Balance Principle.
• Manual set up of sensitivity all other parameters through potentiometers.
• Easy to install and operate.
• Easy changeable electronic module.
• Easy to cleaning and movability.
• Search head 180 rotations and inclination 0-30.
• Solid- state relays for arc free switching.
• Continuous operation.
• Adjustable height Single pillar stand with 4 nos. castor wheel.
• Food grade nonmetallic white chute having authentic certificate designed in one piece (closed) to avoid cross contamination.

The Laboratory Scale Stirrer / Agitator / Homogenizer is applicable to blending, dispersing, homogenization, mixing of liquid, ointment, solution, viscous material and solid-liquid in the pharmaceutical, chemical, food, color and dye, cosmetics, as well as the plastics industry.

Stirrer / Agitator/ Homogenizer mix two or more Liquids to Required Results. It consists of two parts 1) Drive 2) Impeller. This is direct drive stirrer with homogenizer blade.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Capacity available for volume of 2 liter to 25 liter for lab and Pilot scale.
• This intermittent type high-shearing homogenization emulsion machine is high-powered stirring system.
• Option for type of Blade like (1) Propeller ( 2) Slotted (3)Homogenizer.
• The stirrer assembly is mounted on Telescopic stand.

SHREE BHAGWATI believe in creating a close working partnership with our customers and we will support you through every stage of the tooling procurement process from design / specification to maintenance and aftercare.

SHREE BHAGWATI recognizes the importance of quality, value, delivery and customer satisfaction. We also recognize the importance of producing our tools to your specifications each and every time. Thats why we have taken the lead in developing quality tableting systems to ensure you are comfortable we can meet those expectations on every order.

• Quality Dies & Punches as per world standard.
• Premium S7 Steel for all punches.
• D3 Steel Standard for all dies.
• Multi-Tip Tooling.
• Carbide lined dies.
• Free Tooling Certifications.
• Inspection Report for each & Every Die & Punch.
• Inspection Kit of Dies & Punches.
• Die & Punch Polishing Kit.
• Storage Systems for Tablet Tooling.

• All exposed parts of S. S. or Aluminium to avoid any rusting.
• Reduction Gear ensures jerk free and Noiseless performance.
• Square Frame imparts Vibration free performance and allows absolute cleanliness even inside.

Shree Bhagwati Mechtech ( india) Pvt. ltd. advanced high efficiency automated tablet coating machine is mainly used in pharmaceutical and food industries. Featuring mechatronis and confirming to the requirement of cGMP. It is a high efficiency, energy saving, safe and clean equipment for film and sugar coating of tablets, Pills and candies with organic film, aqueous coating and sugar film etc.

• Film Coating with organic solvent, Enteric Coating and aqueous coating
• Sugar Coating

The tablet to be coated make continuous complicated orbital motion the closed rotating Drum under the action of a streamline of Baffles. During the motion coating medium automatically sprays according to the technological process and rational technological parameters, at the same time hot filtered air supplied under a negative pressure. The hot air penetrates through the tablets core layers and is discharged from the bottom of the layers, so that the coating medium sprayed on the surface of the tablet cores will dry rapidly and evenly, thus forming a solid and smooth surface film on tablet. The whole process is finished under the automatic by PLC Controls with touch screen Interface.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Fully automatic film & sugar coating process by PLC Controls with HMI Touch screen.
• Flexible batch operations.
• Complete separation of production and technical area.
• Extremely user friendly software and operation through PLC.
• The machine structure made from S.S.304 quality fitted with Closed Drive, Perforated Pan, Washing sink, Inlet air plenum, Exhaust air plenum with Air tight door.
• Excellent mixing and tumbling by special design of removable on each sloping face of the pan and anti sliding baffles provided on perforated diagonal face.
• Perforated Pan having variable speed through AC frequency Drive.
• Pan mouth closed with Stainless steel door with a glass for process visualization.
• A stainless steel 316 sinks at bottom of pan for collection of powder with necessary stainless steel piping with tri-clover joints for ease of cleaning during the changeover.
• FLP Fluorescent Light is provided for illumination inside the pan.
• All doors, safety guards and covers are provided with a silicon food grade seals.
• Automatic Spraying systems provided with Atomized spray Gun, Adjustable spray gun arms, High precise flow peristaltic pump, solution holding tank with pneumatic stirrer.
• Front Entry stainless steel arm, with facility to adjust the angle of spray guns is provided.
• Inlet air and Exhaust air plenum provided with silicon seal with easy removable for cleaning.
• Inlet air and outlet air will be controlled by pneumatic operated damper which is provided on top of the machine and at inlet and outlet duck.
• Inlet air and Exhaust air flow controls through AC Frequency drive of both blower.
• Inlet Air handling unit made from double screen insulated with puff with inside stainless steel 304 quality and outside powder coated.
• The Inlet air handling units fitted with Pre filter- 10 micron, Inlet air blower with motor, Dehumiditifier- child water circulation coil, Stainless steel 304 quality Steam/ Electric heat exchanger with fins, Final filter with 5 micron, HEPA filter -0.3 micron.
• Exhaust Air handling unit provided with dust collection system with 5 micron filter or wet scrubber and exhaust blower. The Exhaust air dust collector unit is made from .S.S.304 Quality.
• Treatment of exhaust air for pollution free operation.
• The Entire Inlet Air handler and Exhaust air unit to be install in technical service area.
• Tablet discharging facility will be through the special diverter assembly.
• Advanced CIP /WIP System is provided for pan internal by spraying ball and outer washing by spraying nozzle both side. The complete system will operate and controls through machine PLC for washing cycle for Plain water, Detergent, Hot water, Distilled water and Drying by air.
• All motor are flam proof/ Explosion proof provided.
• Advance PLC Controls system with HMI- color Touch screen provided of Allen Bradley/ Siemens make for complete automatic coating process and batch data receipt management . Also option for SCADA connectivity with FDA 21 CFR part 11.
• The machine instruction manual and Validation document provided for DQ, FAT, IQ, SAT and OQ with test and calibration certificate.

• Interchangeable Pan.
• Solid Pan for confectionery products.
• Wet Scrubber.
• Dry Dust Collector.
• Dehumidifier.
• Steam or Electric Heat Exchanger.
• Tablets charging by bin loader.
• SCADA Connectivity.

De-Duster is pharmaceutical processing equipment that removes the fine surface dust from tablets through using vibratory effect. This machine can be linked directly to any type of high speed tablet press.

In spiral deduster there is vibrated spiral path perforated sieve. The tablets enter in centre of perforated sieve from directly Tablet Press then they are gently vibrated and the tablet to move forward, turning and rotating along the spiral path of perforated plate to outer peripheries. In Elevating Deduster there is vibrated up hill type sieves. The tablets enter bottom inlet of perforated sieve from directly Tablet Press then they are gently vibrated and the tablet to move forward, up ward , turning and rotating along the spiral up hill path of perforated plate to outer at top of the sieve.

These remove the layer of surface dust and edges of tablet. The dust is collected by a dust extraction system through a hose pipe spigot connection and the tablet fall into the container.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Geometrically designed tablet route to ensure remove dust and burrs.
• Easy to install with all types of Tablet Press with inline metal detector.
• Option for Spiral OR Elevating-Up hill type Deduster.
• Adjustable height.
• Easy to mobility.
• Easy and simple dismantle for cleaning of all contact parts.

Preparation vessels, Reactor and storage tank and has consolidated a process as customer needs.

• Design compliance with cGMP.
• Capacity up to 25, 000 Liter.
• Product Contact AISI 316L .
• Vertical & Horizontal design.
• Atmospheric, Vacuum or Pressure Operation.
• Plain, Jacket for heating & cooling.
• Option for Heating by steam, hot water or tharic fluid oil & Electric heater.
• Thermal Insulated.
• Mechanicals or Electro polishing of internal surface.
• Welded, flanged or hinged type cover.
• Integrated Cleaning in Place-CIP.
• Sterilizing In Place-SIP as an Option.
• Option for mounting on legs or flange.
• Portable execution on request.
• Validation protocols & Instrumentation celebration.

• Agitator can be top or bottom driven or magnetically driven.
• Propeller type, Anchor type provided with High speed disperser or rotor-stator homogenizer.
• Single or double mechanical seal.

• For production, filtration, transfer and storage solution.
• Pre reparation vessels.
• Inline homogenizer.
• Inter Connecting Pipe.
• Solid or sugar Charging System.
• Working Platform.

• Controls of all function by PLC Controls with HMI Touch screen.
• Level controls by means of capacitance probe or electronic load cells.
• Digital indication and controls of all process parameters for Process time, agitator speed, temperature, pressure & level.

The IPC Bin loader is used for transferring and discharging the material dust free and without human touch in pharmaceutical industries for Load powder in to HSMG bowl, hopper of tablet press, Container of blender, Load tablet in to hopper of blister pack & Coating Machine and as well as used for online sifting and milling.

The IPC Bin Loader consists of a main frame, Bin fixing arm, Hydraulic lifting device and pivot base. This main frame move 360 degree on axis and Bin fixing arm move upward and downward in the frame by hydraulic cylinder and power pack system. The moveable container/Bin bringing placed beneath the fixing arm, operate the hydraulic drive system which lifts arm with the container and it raises the container till it gets stops exactly in a position, slew the column to swivel the bin over inlet of the next processing equipment, then it could be unload by opening of butterfly on the whatever next processing equipment.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Capacity available 30 Kg to 600 Kg.
• Suitable for inline process with Milling and Sifter.
• Suitable for load material on High shear mixer, Blender, Tablet Press, Autocoater & Blister Pack Machines.
• 360 degree Swiveling movement of lifting arm.
• Loading height designed as per end user requirement and slab hight.
• Structure cladding is S.S.304 quality and matt finished.
• Hydraulic power pack system for lifting.
• If the power goes off, the loader remains where it was.
• Limit switches are provided to stop the hydraulic drive when the stroke is competed.

Conventional coating machine are used to sugar coat tablets, pills, etc in for a variety of industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds.

The product is to be filled inside the pan. During the rotation motion, coating material is sprayed by spraying system according to the technological process and rational technological process. So process materials (product) are coated due to rotating pan. The coating round pot is rotated by variable speed. At the same time hot air is supplied through inbuilt Hot air blower system which dries rapidly (heating or cooling) and evenly thus forming a solid and smooth surface.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316/304 & non contact parts AISI 304.
• Conventional coating system for manual film coating and sugar coating.
• Machine is designed with fabricated structure fitted with SS enclosure which makes simple, cleanable outside covering and mounted on anti vibration pad.
• Closed powerful pan drive with reduction gearbox and motor by variable speed pulley.
• Movable hot air blowing system with electric heater.
• Easy to replace polishing pan and other size coating pan.

• A.C. frequency Drive for pan.
• Fixed or detachable type baffles.
• Interchange different size Pan & Polishing Pan.
• Atomized Spraying system with Spray Gun, Peristaltic Pump and Solution tank and Electro Pneumatic controls.
• Pressurized vessel with spray gun.
• Flame Proof Electrical.
• Pellegrini type Coating machine.

• Overload pressure release mechanism.

Polishing machine Bhagwati - 1 Model is used after capsules are filled for cleaning the powder attached on the capsules surface.

• Design as per stringent cGMP requirements.
• All Contact parts of AISI Stainless Steel 316 Quality.
• All Non contact parts of AISI Stainless Steel 304 Quality.
• Longer brush clean the dust on capsule.
• Excellent performance, excellent balances, low noise, and trouble free.
• Non - Scratch capsule.
• The inclination of polishing barrel and adjustable brush speed (adjust treating time for capsule polishing).
• Easy for cleaning and maintenance.
• Applicable to all size of capsules (#) 00, 0, 1, 2, 3, 4, 5.
• No need of change parts for all the size of capsule.

We are glad to introduce ourselves as manufacturers of Self Adhesive labels Rolls . We combine our past experience of 20 years in Pre-Press with professional team of labeling and labels experts to fulfill any labeling requirement. Our labeling solutions are at par with the best in the world with High Speed NILPETER (USA) servo flexo combination printing machine , capable of printing with UV as well as Water Based Inks. We offer high quality world class labels in all types of substrate such as Paper, PP, PE, clear on clear with eight colors printing and value additions to your label such as Inline coating/Varnish, Emboss effect, Perforation, Cold / Hot foiling, Lamination, Reverse printing and many more. We assure high quality, most attractive & cost effective labels for industries such as Pharmaceutical Self Adhesive labels Rolls, FMCG Self Adhesive labels Rolls, Liquor Self Adhesive labels Rolls & Beverage Self Adhesive labels Rolls, Apparel Self Adhesive labels Rolls & Textile Self Adhesive labels Rolls, Chemicals Self Adhesive labels Rolls, Lubricants Self Adhesive labels Rolls, Airlines Self Adhesive labels Rolls etc.

The stand alone label applicator machine is mainly utilized for labeling a product in bulk quantities on the conveyor lines. It has a powerful sensor in order to detect the product when it moves down from the conveyor, and thereby activate the application of the label at the appropriate time. Moreover, the product should be properly handled and must also be firmly controlled in order to assure that the label is perfectly placed on the product.This sophisticated label applicator machine is also well synchronized with all the other functions of the machine, such as product feeding, roll winding and label dispensing for enabling precise and optimum labeling. Further, it even provides the facility of online changing the labeling speed, with the help of a single speed point available on the control panel.

This high speed model SB LABEL 01 of the stand alone label applicator has the capacity to deliver an output of up to 250 products in just one minute. The diameter of the inner roll is 75 mm and the outer roll diameter is 300 mm. It also includes an exceptional single point synchronized speed control system; and an inherent A.C. frequency drive system. Besides this latest label applicator machine even has an automated system for detecting the length of the labels. Thus the user does not have to manual feed and store the data related to the label length in to the memory of the equipment; and also retrieve the same details, whenever the label size is changed and even when the machine is restarted. This elegant system thereby results in saving your time, prevents down time of the machine, and also reduces the cost, and assists in achieving higher production. In fact it is regarded as an ideal machine, since it meets the diverse needs of the current market.

The disintegrating milling machine (for partition/cutting of dry leaf & stem) is designed for high speed milling, cutting, grinding and pulverizing of hard particles, herbal, dry and wet material milling and especially suitable for herbal products.

The product is poured to centre of the blade from the top through in feed hopper and material centrifugal on the rotor blades beater assembly for milling or pulverization. Due to the slotted shearing edges mounted on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening. The disintegrating milling machine is designed and fabricated for tacking heavy load without vibration on high speed there for any type of herbal hard material can be milled on the disintegrator.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• High Speed milling on 4500 RPM.
• Output of the machine 200 to 800 Kg / Hour.
• The chamber is completely fabricated from 10 mm thick Stainless Steel.
• Half round toothed plate fitted in side the chamber for more high shearing edges.
• Dynamic balanced beater assembly bearings are in a separate pillow block at outside chamber.
• Wide range of sieve of perforated.

The spraying system used for atomized film coating of tablet on conventional coating in pharmaceuticals food, Agro chemical and confectionery industries.

The spraying system is consists of Atomized spray nozzle, High Precise Peristaltic pump, Stand for Gun, Solution holding tank and automatic controls system. The complete system is work on based on auto coater machine technology for film coating.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Automatic spraying system for tablet film coating on conventional coating.
• Easy to moveable and dismantle for one machine to another machine and for cleaning.
• Easy to controls to atomized spray and flow of liquid.
• Automatic Coating System is Consists of
  • 1. Solution holding tank.
  • 2. Peristaltic Pump
  • 3. Atomized Spraying Gun
  • 4. Adjustable Stand for Spraying Gun
  • 5. Automatic Electro Pneumatic Controls Panel.
• The system is available with one or more than spraying nozzle as per coating pan size.
• Solution holding tanks can be different capacity and with and without stirrer.

The Tippler-Lifting and tipping device is a hydraulic device which is having an arm used for lifting and turning FBD bowl by 180. Thus it is used to unload fluid bed dryer bowl material in to Cone mill OR Multi mill OR Oscillating granulator in a dust free way for down sizing or dry milling. The operation is completely dust free and eliminates manual handling or scooping.

The FBD Bowl is placed beneath the Tipper. The inverted cone of the Tipper is lowered so that the brim flange of the bowl touches the inverted cone. Both are clamped together with quick fixing clamps. The whole assembly is raised.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Capacity available 30 Kg to 600 Kg.
• Unloaded material with inline process with cone mill, granulator with IBC Bin for dust free process.
• Fully automatic system, with hydraulic lifting and tipping arrangement for quick and easy handling.
• Eliminates tedious and unhygienic manual handling of products.
• Tilting arrangement with a single point pivot ensures GMP with ease of operations.
• 180 degree swiveling of vertical mast with vertical lift and tippling ensures motion in all three dimensions as required.
• Discharge cone is fitted with a 250mm diameter butterfly valve at bottom with silicon rubber seat. Can be provided with pneumatic actuator for opening or closing butterfly valve without reaching for it by pneumatic controls.
• Hydraulic power pack can be mounted over the service floor so the column of the tipper acts as pendent and through the hollow pivot shaft, hydraulic lines along with electric cables can travel above the working area slab.
• Suitable view glass window provided on the conical tapering portion of the tipper, which acts like a view window.
• Stainless steel lift yoke with integral rotation drives for rotation of discharge cone and container.

Vacuum Homogenizer Mixer is applicable for a wide variety of viscosity product, i.e. emulsions and semisolid. It integrates with pressure, heating, cooling and vacuum for Agitating, Mixing, Emulgating, Dispergating, Suspending, Homogenizing & agglomeration functions into single machine.

Two low speed agitator; Counter rotating mixer with outer anchor stirrer with self pressure Teflon scrappers and contrs rotating inner paddle blade.

Ultra Mixer is a combination of counter - rotating inner paddle agitator and outer anchor agitator, generating a disturbance in the normally circular flow pattern and dampens vortex formation. The blades of paddles are pitched to promote top - to bottom flow. In addition, self adjustable scrapers are utilized to prevent the build-up of a stagnant film between the agitator and the vessel, and assure efficient heat transfer to product during heating and cooling steps.

Toothed rotor/stator type Homo disperser, locates at the bottom of the vessel, accomplishes emulsification by physical action and centrifugal forces created by high speed rotation of the rotor. These actions would break up oil phase/ aqueous phase liquid stream into tiny and discrete droplets.

• Design compliance with cGMP
  • Integrated Cleaning in Place-CIP.
  • Sterilizing In Place-SIP as an Option.
• Batch Size
  • Available model 10 Liter to 6000 Liter working Capacity.
• Materials
  • Product Contact AISI 316L.
  • Food Grade silicon rubber for seal.
• Water Phase Vessel
  • Jacket for heating & cooling.
  • Vacuumize process.
  • Vessel Inside Pressure (-1 /+2 Bar)
  • Heating Jacket Pressure (-1 /+6 bar)
  • Tilting vessel up to 500 Liter.
  • Heating by steam or hot water circulation.
  • Direct cooling with water.
  • Temperature controller & safety pressure Valve.
  • Bottom discharge with valve.
• Agitator mixer with scrapper
  • Mixing flow top to bottom in vertical axis.
  • Outer Anchor agitator with paddle with 45C.
  • Inner paddle agitator with 45C.
  • Teflon scrappers on outer agitator.
  • Scrapper cleanly working on both side.
  • Optimize heat transfer.
  • RPM steplessly with variable speed drive.
• High speed Homogenizer
  • Toothed Rotor - stator type.
  • RPM steplessly with variable speed drive.
  • High shear & pressurization of the homogenizer.
  • Thus homogenization of high viscosities up to 400.000 mPas.
  • Homogenizer mounted on lower position in the centre of vessel.
  • Can be homogenization in circulation.
• Top Lid
  • Motorized top lid for lifting & lowering.
  • Safety Interlock process with limit switch.
  • Connection for Vacuum, Charging, Eye glass window, Light glass, CIP, SIP, Pressure gauge & safety valve.
• Vacuum System
  • Water Ring Vacuum Pump.
  • Vacuum gauge & Vacuum relief valve.
• Machine Structure
  • Rigid modular structure with AISI 304.
  • Mounting on Anti vibration pad so, No foundation require.
• Controls & Visualization
  • Electric Controls with digital display.
  • Optional PLC Controls with HMI Touch screen.
  • RPM and Process time entries.
  • Temperature controls- Heat/cool.
  • Vacuum start- Stop.
  • Integrated Data Recording for batch.

• Emergency stop button
• Safety vacuum relief valve & Indicator Gauge.
• Safety Pressure Valve.
• Limit switch at top lid

The conveyor belt brings the container or products from the labeling/blister/strip machine, These bottles/products operators in turn pick up the bottles/products & visually inspect the bottles/products & doing necessary action like primary packing, secondary packing, picking & placing at proper place.

The Packing conveyor belt is having stainless steel Table Top with moving Endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe & supported on adjustable height bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection & packing into the box. Conveyer belt speed can be very as per requirements by variable frequency drive. The belt is drives through gear motor with two roller assembly.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• Machine structure is made from AISI 304.
• Belt-alignment system for long life & striate running of belt.
• Endless sandwich belt with direct gear drive.
• Length & width of belt can make as per customer requirement.
• Both side working platform- 12' size.
• Adjustable height of conveyor belt to align with other machine
• Self-alignment bearing for easy maintenance.
• Rigid Vibration free Construction for trouble free performance.

• AC Frequency drive with variable speed.
• Castor Wheel with lock.

The Packing conveyor belt is having stainless steel Table Top with moving Endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe & supported on adjustable bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection & packing into the box.

The conveyor belt brings the container or products from the labeling/blister/strip machine, These bottles/products operators in turn pick up the bottles/products & visually inspect the bottles/products & doing necessary action like primary packing, secondary packing, picking & placing at proper place.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• Automatic conveying of goods for packing.
• PVC and endless belt for long life.
• Structure is made from AISI 304 with matt finish.
• Belt-alignment system for long life & striate running of belt.
• Direct gear drive with variable speed drive.
• Adjustable height of conveyor belt, to align with other machine of the line
• Self-alignment bearing for easy maintenance.
• Rigid Vibration free Construction for trouble free performance.

• Castor Wheel with lock.
• Extra end table at end of conveyor.
• Special type adjustable angle at Initial of conveyor for strip or blister packing.
• S.S. chain instead of PVC belt.
• Flame proof Electricals.

The paste kettle is designed for preparing paste / starch / binder solution for making granules for tableting formulation and granulation . It has a universal application resulting in uniform melting.

The kettle has a small cylindrical top shell with a spout for pouring out binder mass. It is provided with Anchor type beater for paste mixing with dual speed option.

• Capacity available in 50 Liters to 300 Liters.
• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Product Bowl with Jacketing and Insulation for heating.
• Tilting unit for unloading.

• Heating Option: (1) Steam Heated (2) Electric Heated with tharmic fluid.(3) Pressurized hot water
• Temperature controller with sensor.
• Anchor stirrer with Variable speed.
• Pillar design kettle with anchor stirrer.

• Total drive transmission system enclosed
• Limit switch installed in the top lid ensure lid is closed
• Overload relay Protection.

Automatic Rotary Multi Head Cap Sealing Machine works with Nos. of rotary head to cap sealing. It is used to cap sealing of bottle in pharmaceuticals, food, dairy, agro chemicals and Beverages industries.

Automatic rotary multi head cap sealing Machine is versatile, self-supported on stainless steel structures. The machine is precision built with rotary head with drives for sealing. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body. Main drive of the machine, conveyor drive & cap-feeding bowl consist of motor with synchronized variable Drive and No container No Sealing system arrangement.

Containers are feeds from filling machine or unscrambler and moves on SS Slat conveyor and star wheel bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of threading & sealing and move container further process for inspection, labeling or packing.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• Machine structure is made from AISI 304 with matt finish.
• Adjustable height of conveyor belt, to align with other machine of the line.
• Sealing pressure can be adjusted for different size of caps and gauges.
• Universal coupling for quick and easy setting of In-feed worm
• No container no cap system.
• Low noise level, low power consumptions.
• Self-lubricating UHMW- PE guide profile for low friction wears surface, smooth and noiseless conveying.
• Adjustable bottle height gauge for easy and quick setting.
• Outside cap feeder system as per cGMP norms.
• Minimum and maximum level of cap in chute to be maintain through sensor hence to avoid damage & rubbing of cap.
• Inching system provide for setting of sealing operation.

Tube Filling Machine is an used for fills of ointment, cream, tooth paste, gel and semi solid materials in aluminum or in plastic tube and sealing of the tube. Application of the machine is in pharmaceuticals, cosmetics, foods, adhesive, paint, chemicals and others industries. Tube filling and sealing machine is designed with filling and sealing process to be completely untouched and single machine process. The unit comes in various batch capabilities to handle a large range of tube sizes and shape by change of parts. Tube filling machine is equipped with high accuracy filling systems, provides clean and accurate filling at optimum speed providing high quality and product.

Tube filling machine is have tube holding cups and manually tubes are positioned in cups and then fills, seals and ejected to discharge hopper. Filling volume can be easily adjustable as per desire weight and there are sealing option for aluminum tube by folding & crimping device and PVC tube seal by thermo heat sealing device. After sealing of tube then coding can be do on sealing area by coding device. Before filling tubes are to be clean by compressed air for removes of dust.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304.
• Completely fully automatic operations for filling, sealing & discharge.
• Tubes are manually load in cups.
• Simple Mechanism & Operator Friendly Machine.
• NO TUBE-NO FILL device.
• Charging Hopper is provided with jackets for heating and agitator assembly.
• Cup holder is made from nylon materials.
• Filling change parts for (1) 1 to 5 ml. (2) 10 to 50 ml (3) 50 to 100 ml.
• Air blow system for tube cleaning.
• Synchronize variable speed drive for rotary head and filling head.
• Folding & Coding at Individual Station.

Automatic Double head Auger type powder filler is a versatile filling machine ideal for non-free flowing, fluffy & sticky powders in bottles. e.g. Pharmaceuticals powder, talcum powder, tooth powder, custard powder, pesticide powders, ground spices etc.

Automatic double head dry powder auger filler utilizes the principle of positive displacement of screw. Precisely designed augers are displaces product through funnels and containers convey by conveyor belt. There are two separate filing head mounted on top plate with pillar and inline filling station with conveyor. Initial first fill single bottles at first filling station and after that both filling station fills bottle together by controls system and bottles holding system is designed to moves two filled bottle together.

Dry bottles are fed through turn table to conveyor belt and flat conveyer feeding bottles to filling heads on sets speed and bottles stop and hold for filling station. Sensor gives signal to electromagnetic clutch start to rotate augers for filling. It will fill desire quantity of powder in to the container through auger. An auger filling times precisely sets on desire requirement by timer controls and speed of auger can be set by variable speed drives. After filling of bottle pneumatic cylinder unhold bottles and move forward to further process on conveyor.

• Designed as per cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304.
• Double head auger filling with conveyor for fast production.
• Easy changeover for different pack sizes.
• Filling weight easily sets by timer of auger.
• Versatile Agitator Mechanism ensures continuous flow of products, to the Auger.
• "No container No filling" Systems.
• Filling and conveying speed adjustable through variable speed drives.
• Pneumatic operated bottles holding system.
• Simple Construction assists maintenance and cleanliness.OPTIONAL FEATURES :
  • PLC Controls with touch screen
  • Servo motor controls.
  • High & low level powder sensor in hopper.

Strip packing the versatile design of the machine makes it eminently adaptable for packaging a variety of products like pharmaceuticals Uncoated and coated tablets, soft gelatin capsules, hard gelatin capsules, confectionery products, chewing gums, toffees, Buttons, pins, ball bearings, rubber and plastic products, electronic components, ball-pen refills and many more.

Strip Packing machines are designed to handle a wide range of products with utmost precision and speed upto 2400 units per minute. The products from the hopper passes through a stainless steel feeding system and goes to sealing roller cavities where laminated foils, drawn from two rollers, packs and seals the products in a continuous strip. The strip then passes through vertical and horizontal cutter assemblies to deliver the desired sizes of strip packages.

• Completely fully automatic liquid / oral manufacturing plant with fully automatic operations and designed as per cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304.
• Available in different models of 2, 4, 6, 8, 10 and 12 Tract, capacity from 400 to 3000 tablet minimum with maximum sealing width of 250 mm.
• Standardized, quickly interchangeable parts.
• Compact steel fabricated body with adequate inspection windows.
• Adjustable foil cutting and slitting device. Noiseless, trouble-free smooth operation.
• Vibratory feed control for higher output.
• Cavity shape and knurl design of choice.
• Cartridge type heaters and thermostatic temperature control suitable for all types of packing materials.
• Ensures air tight leak-proof packing.
• Suitable for most heat sealable foils like Paper Poly, Aluminum Poly, Cello Poly, Cellophane, and Glassine Poly.OPTIONAL FEATURES :
  • Performing rollers to pack coated tablets, capsules and caplets for economy of packing material.
  • Conveyer belt as per requirement.
  • Disc feeding system for odd shaped products.
  • Electric temperature control system with indicator to read foil sealing temperature while machine in use.
  • Strip counter and Batch coding attachment.
  • Pusher mechanism for feed chute.
  • Flame proof Electricals.
  SAFETY FEATURES :
  • Protective Grill in front.

The Laboratory Mixer is designed for uniformly mixing of dry and wet material and especially suitable for Pharmaceutical, Food and chemicals industries.

The mixer consists of a rigid fabricated structure motor, gear box, mixing drum, stirrer and tilting device. The mixing drum complete with stainless steel body, stirrer and tilting device. The mixing drum complete with stainless steel body, stirrer and sealing arrangement. The drive of mixing paddle is through suitable gear box and motor. The tilting device is provided to make easy the unloading of the material and easy cleaning of the mixing drum. The Mixing stirrer can be provided different shape Ribbon type / Paddle type according to machine.

The material under mixing process can be monitoring through acrylic dust cover and its controls dusting and contaminations. The hinged features allow flexibility of adding solution through cover during in operation. The acrylic dust cover is so interlocked that ensure container is totally closed.

• Design as per stringent cGMP requirements.
• All contact parts SS 316 quality.
• Container capacity 10 Liter/5 kg.
• Tilting device for easy unloading cleaning.
• Self adjusting sealing arrangement to avoid entire black particles.
• Uniform Wet and Dry mixing.
• In locked safety mixing process.
• Option for different blade, Mass mixing blade, Paddle blade and Ribbon Blade.

Automatic Air Jet Cleaning Machine inbuilt Unscramble is a compact unit used for cleaning of Dry Syrup pat bottles before filling.

This machine works on a principle of back pressure of Bottle which will be fed by the unscramble to reach separator assembly, which transfer the Bottle on conveyor belt and pushes bottle to the cleaning section one after another. Machine consists of two inverters and one cleaning section. Bottle will be pushed by rotating separator towards the in feed inverter, which makes the Bottle in the wrong direction and push it to cleaning section through back pressure of other Bottle.

Cleaning section is equipped with continuous vacuum system. Bottle reaches to the cleaning section, a pair of nozzle starts to flush the air inside the neck of the Bottle and simultaneously vacuum will suck the particle, disturbed by the air. Then Bottle passes to another inverter, where changes the direction to the right direction, further Bottle moves either to the filling machine.

• Design as per cGMP - Current Good Manufacturing Practices compliance
• Made from AISI 304 and diverter assembly EDPE.
• Positive air pressure and vacuum cleaning.
• Easy operation for setting, change over& cleaning.
• Stationary S.S. nozzles.
• Automatic loading and unloading of container.
• Individual control for air pressure and vacuum cleaning.
• S.S pressure meter
• High capacity blower suck the minute particle from bottle, ensure good cleaning of bottles.
• Variable speed with higher output.
• Single gear motor synchronizes conveyor, star wheels and sealing head.
• Acrylic Cabinet with Aluminum Structure for machine.
• Can be provided In feed Turn Table.

TheShree Bhagwati Mechtech (India) Pvt.Ltd. compact NewLABOcoata- Lab Auto Coater is high efficiency and intelligent automated film & sugar coating advance technology is mainly used in pharmaceutical and food industries. Featuring mechatronis and confirming to the requirement of cGMP. It is a high efficiency, energy saving, safe and clean equipment for film & sugar coating of tablets, Pills and candies with film - organic solvent and aqueous coating.

The tablet to be coated make continuous complicated orbital motion the closed rotating Drum under the action of a streamline of Baffles. During the motion coating medium automatically sprays according to the technological process and rational technological parameters, at the same time hot filtered air supplied under a negative pressure. The hot air penetrates through the tablets core layers and is discharged from the bottom of the layers, so that the coating medium sprayed on the surface of the tablet cores will dry rapidly and evenly, thus forming a solid and smooth surface film on tablet.

• Designed strictly compliance with the stipulation of cGMP.
• Product contact parts AISI 316/ 316 L Quality.
• Complete automatic coating processes with advanced PLC Controls with HMI touch Screen.
• Perforated coating pan with mixing baffles, anti slide ribs and variable speed by VFD.
• Enclosed pan drive through reduction gear box and motor.
• All doors, safety guards and covers are provided with a suitable food grade seals.
• The perforated pan has a suitable mouth opening for tablet Charging and Discharging which provided with stainless steel cover and a glass window for process visualization.
• Front Entry stainless steel arm, with facility to adjust the angle of spray guns is provided.
• Atomized Spraying system with solution holding tank, peristaltic pump, atomized spray gun and auto electro-pneumatic spraying controls system through PLC
• Inbuilt Inlet Air handler with blower, electric heater, 20 & 5 micron filter & 0.3 micron HEPA.
• Inbuilt Exhaust air blower with 20 micron filter.
• Inlet air flow and exhaust air flow can be adjusted through VFD of blower.
• Differential pressure indicator for pan and HEPA filter.
• WIP/CIP system for easy cleaning
• Option for Interchangeable pan.

• Explosion proof electric motor.
• Auto shutoff system for over limit temperature/ heating & Auto stop when process is completed.
• Air pressure switch installed to ensure pressure is in limit.
• Differential pressure indicator for HEPA Filter.
• Overload relay controls.

Dust laden air enters the collector through an expansion chamber, where heavy dust particles are deposited by gravity. The fine dust passes upwards through single large orifice and is finally collected by filter. There is an effective snap action shaking mechanism for shaking filter and dust is deposited into drawer type tray. There is a large door for changing filter bag and cleaning of the machine.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Easy to connect all types of Tablet press and De-Duster.
• Dynamically balanced blower.
• Easy mobility.
• Also we designed special type dust collector and extractor as per customer requirement.

A Centrifuge is efficient machine for Liquid Solid separation and centrifugal filtration/ fluid clarification in various industries such as Pharmaceutical, Bulk Drugs, API, Chemical, Textile, Herbal, Oil & Sugar Industries.

The centrifuge is a simple device usually driven by a motor that woks on the principle of sedimentation. Objects in a centrifuge are rotated around a fixed axis, thus applying a force perpendicular to the axis. The sedimentation principle uses the centripetal acceleration to evenly separate substances of varying density. Centrifuges can be divided or categorized on several bases such as manual top discharge, Lifting bag type and reversing filter bags with 3 point or 4 Point suspension and front charging & Pusher type.

• Design is cGMP with all contact parts AISI 316.
• Centrifuge is used for separating liquids from solids and centrifugal filtration/ fluid clarification.
• It is offered in basket sizes of 24" 36" 48" & 60".
• Centrifuges offered in different model
  • 1. Heavy duty three point or four point suspension with under driven baskets.
  • 2. Front loading & discharge with horizontal driven basket.
  • 3. Pusher type centrifuge.
• These machines are available with top discharge, bottom discharge or bag lifting type.
• Filter cloth is available in the desired strength and micron size.
• The fabric with poly- propylene, woven / non woven polyester, nylon, cotton etc.

Automatic Air Jet Cleaning Machine inbuilt Unscramble is a compact unit used for cleaning of Dry Syrup pat bottles before filling.

This machine works on a principle of back pressure of Bottle which will be fed by the unscramble to reach separator assembly, which transfer the Bottle on conveyor belt and pushes bottle to the cleaning section one after another. Machine consists of two inverters and one cleaning section. Bottle will be pushed by rotating separator towards the in feed inverter, which makes the Bottle in the wrong direction and push it to cleaning section through back pressure of other Bottle. Cleaning section is equipped with continuous vacuum system. Bottle reaches to the cleaning section, a pair of nozzle starts to flush the air inside the neck of the Bottle and simultaneously vacuum will suck the particle, disturbed by the air. Then Bottle passes to another inverter, where changes the direction to the right direction, further Bottle moves either to the filling machine.

• Design as per cGMP - Current Good Manufacturing Practices compliance
• Made from AISI 304 and diverter assembly EDPE.
• Positive air pressure and vacuum cleaning.
• Easy operation for setting, change over& cleaning.
• Stationary S.S. nozzles.
• Automatic loading and unloading of container.
• Individual control for air pressure and vacuum cleaning.
• S.S pressure meter
• High capacity blower suck the minute particle from bottle, ensure good cleaning of bottles.
• Variable speed with higher output.
• Single gear motor synchronizes conveyor, star wheels and sealing head.
• Acrylic Cabinet with Aluminum Structure for machine.
• Can be provided In feed Turn Table.

Basket Extruders have proven successful in many industries, including pharmaceutical, agricultural chemicals, and inorganic chemicals among others.

• Forming pharmaceutical extrudates prior to Spheronization pellets for controlled release applications.
• Production of water dispersible and water soluble granules of agriculture chemicals.
• Granulation of confectionary products prior to Tableting.
• Densification of organic chemicals.
• Formation of free-flowing vulcanization compounds

Basket Extruder provides the lowest pressure method of wet extrusion combined with moderate sheer. To form granules from 0.5 to 5.0 mm in diameter our basket extruders provide a very versatile means of wet extrusion. They produce consistent extrudate from wetted powders at laboratory through multiple ton per hour extrusion capacities.

In the upper chamber of our basket extruders the counter rotating internal breaker bar system breaks larger clumps of wetted feed material to allow gravity to convey the wetted mass down into the bottom extrusion rotor arms which, in turn, densifies the material and extrudes it through the screen basket. Formed extrudates are discharged without damage by our proprietary discharge chute design.

Product extruded with basket extruders has a stable structure with a large surface area which provide the optimum pliable properties for spheronization.

Basket Extruder models are available with capacities from bench level scale to over 3, 000 Kg/hr. Separate basket extruder designs for pharmaceutical and industrial applications are available. All extruder models are easily cleaned and have appropriate shaft seals protecting the feed material from contamination. All process wetted components are made available per FDA or industrial requirements. Metallurgies include: 316L, 316, 304, as well as more exotic metals

• High speed mixing & granulating.
• Adjustable angle and gap between rotor blades and basket screen allows optimization of extrusion force.
• Short active extrusion path minimizing temperature rise for heat sensitive actives.
• Narrow particle size distribution.
• Very high capacities up to 3, 000 kilograms per hour.
• Screen sizes from 0.5 to 5.0 mm.
• Extrudates well suited for Spheronization.
• Appropriate electrical panels and drives for explosion proof operation.
• Simple free falling discharge.
• Adjustable wiping blades.
• Internal counter rotating breaker bar keeps material from sticking together.
• Safety switch prevents operation when screen removed

• AC variable frequency drive for accurate control.
• Explosion proof electrical are available.
• CGMP, Food, or Industrial design.
• 316L, 316, 304 Stainless Steel process wetted parts.

Planetary Mixer is ideal for mixing of wet/dry powder materials. It has a homogeneous mixing action i.e. emulsions and semisolid. It integrates mixing, vacuuming, heating, cooling and homogenizing functions into single machine, resulting in a considerably reduction in cycle time. The basis of mixing system of Planetary Mixer is a combination of planetary- rotating paddle agitator. 2 Nos. Anchor type agitator with cross baffles rotates in anti-clockwise direction with planetary motion in there axis. While paddle revolves in clockwise direction with planetary action, generating a disturbance in the normally circular flow pattern and dampen vortex formation. The mixing blade and planetary action having dual speed. In addition, adjustable scrapers are utilized to prevent the build-up of a stagnant film between the agitator and the vessel, and assure efficient heat transfer to product during heating and cooling steps. The speed of the agitator and the counter paddle can be varied separately. The Product container is castor wheel mounted for easy load and unload to the machine. The top mixing blade assembly is motorized up and down during container loading and unloading. The mixing container is jacketed for heating / cooling and completely enclosed. The product container can be designed to operate under vacuum; mixing can then be performed without entrainment of air. Top lid of the product container having charging pot for binder adding, eye glass window and light glass.

• Designed strictly compliance with the stipulation of cGMP.
• Product contact parts AISI 316 Quality and Non contact parts S.S.394 Quality.
• Machine compact in designed single base structure to for simplicity in mounting.
• 2 Nos. Anchor blade with planetary rotation for extremely efficient shearing force.
• Top lid is mounted with motorized lifting device.
• Product container is castor wheel mounted for easy load and unload to the machine.
• Rigid drive with planetary gear and reduction gear box.
• Dual speed motor for slow and fast mixing action.
• Scrapper is made from Teflon.

• Ac Frequency Variable Drive.
• Mixing bowl with heating / cooling jacket and insulated.
• No. of Mixing Blade : Single Blade/ Double blade/Triple Blade.
• Type of Blade: Paddle Blade/ Anchor type/Hart Shape Blade.
• Centre located and top mounting high speed homogenizer .

• Emergency stop button.
• Limit switch at top lid.
• Over load protection by relay.

The Sigma Mixer is used for mixing and kneading for mixing, kneading of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, applications in Food, Rubber, Pharmaceutical, Chemical and agro industries, Dry powder to wet phase mixing. This mixer is most suitable for highly viscous material and dough like masses.

The sigma kneader is a double arm mixer, the two "Z" blade rotate towards each others at same or different speed inside a W- shaped product container. The twin screw basin kneading machine with two horizontally arranged kneading blades, which are deeply geared into one another and strip themselves reciprocally. Each blade moves the material in opposite direction thereby providing excellent cross mixing of all raw materials. The blades pass the trough walls and each other at close clearances resulting in good mixing. The close clearance produces a shearing and tearing action that is beneficial to the size reduction of solids. Selection of appropriate blade shape and speeds result in excellent mixing

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All Product contact parts AISI 316/ 316L & non contact parts AISI 304 or M.S.Painted.
• Mixing, Blending and kneading of high Viscosity Materials, with a combined action of Bulk Movement.
• Kneading, stretching folding, dividing and Recombining.
• High Mixing Precision, Short Batch Time, Problem free Cleaning and Residue Free Discharge.
• Automated mixing and granulating process in single bowl.
• Available in Capacity from up to 1000 Kg Industrial Productions.
• There are different types of blades: Sigma-"Z" blade, Spiral blade, and Naben blade.
• Selection of appropriate blade shape and speeds result in excellent mixing.
• Hydraulically lifting device with power pack for unloading.

• Jacketing Bowl for heating and cooling.
• Spraying system.
• PLC Controls with HMI touch screen.
• Flame Proof Electrical.

• Total drive transmission system enclosed.
• Limit switch installed in the top lid ensure lid is closed.
• Air pressure switch installed to ensure pressure is in limit.
• Limit switch installed at discharge to ensure product container underneath of discharge.
• Overload relay Protection and Emergency stop button.

The filter press is a solid liquid separation device using the principle of pressure feeding. It is highly efficient, compact, dewatering device for separating solids from liquid slurries in the form of compressed cake. It has wide range of applications by several industries like Pharma, bulk drugs, distilleries, beverages & other industries.

The unfiltered liquid is fed into the filter under positive pressure, where liquid travels in downwards direction and finds its way through opening on sides of the Filter Plates. As the liquid pressure increases, the Filter media holds the foreign particles and allows only clear filtrate to pass through the central channel formed by interlocking pressure cups to the outlet. Filtration is continued until the cake holding capacity of the unit is reached or until the filtrate rate becomes too slow owing to cake resistance.

• Design is cGMP with all contact parts AISI 316L.
• Complete filtration of the batch without any hold up due to reverse flow of liquid.
• The cake, filtered & solids remain totally enclosed allowing filtration of toxic, hazardous & explosive liquids.
• No contamination of internal surface of shell.
• The top dome structure ensures fast & easy removal of cartridge assembly & cleaning of cake.
• Skid type unit with castor wheel.

The Mass Mixer is designed for uniformly mixing of dry and wet material and especially suitable for powder of Pharmaceuticals, Food, Herbals, Agro Chemicals & Chemicals.

The mass mixer consists of a rigid fabricated structure motor, gear box, mixing drum, stirrer and tilting device. Specially designed self adjusting sealing arrangement of unique design is provided to ensure that no black particle enters into the mixing drum. The material under mixing process can be monitoring through acrylic dust cover and its controls dusting and contaminations. The tilting device is provided to make easy the unloading of the material and easy cleaning of the mixing drum.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Uniform Mixing with paddle blade stirrer.
• Self adjusting sealing arrangement to avoid entire black particles.
• Tilting device for easy unloading and cleaning.
• The interlocked acrylic covers of product container, enclosed drive & Overloads relay protection.

• Flame proof electric.

• Total drive transmission system enclosed
• Limit switch installed in the top lid ensure lid is closed
• Overload relay Protection.

Planetary Mixer is ideal for mixing of wet/dry powder materials. It has a homogeneous mixing action i.e. emulsions and semisolid. It integrates mixing, vacuuming, heating, cooling and homogenizing functions into single machine, resulting in a considerably reduction in cycle time.

The basis of mixing system of Planetary Mixer is a combination of planetary- rotating paddle agitator. 2 Nos. Anchor type agitator with cross baffles rotates in anti-clockwise direction with planetary motion in there axis. While paddle revolves in clockwise direction with planetary action, generating a disturbance in the normally circular flow pattern and dampen vortex formation. The mixing blade and planetary action having dual speed. In addition, adjustable scrapers are utilized to prevent the build-up of a stagnant film between the agitator and the vessel, and assure efficient heat transfer to product during heating and cooling steps. The speed of the agitator and the counter paddle can be varied separately.

The Product container is castor wheel mounted for easy load and unload to the machine. The top mixing blade assembly is motorized up and down during container loading and unloading. The mixing container is jacketed for heating / cooling and completely enclosed. The product container can be designed to operate under vacuum; mixing can then be performed without entrainment of air. Top lid of the product container having charging pot for binder adding, eye glass window and light glass.

• Designed strictly compliance with the stipulation of cGMP
• Product contact parts AISI 316 Quality and Non contact parts S.S.394 Quality.
• Machine compact in designed single base structure to for simplicity in mounting.
• 2 Nos. Anchor blade with planetary rotation for extremely efficient shearing force.
• Top lid is mounted with motorized lifting device.
• Product container is castor wheel mounted for easy load and unload to the machine.
• Rigid drive with planetary gear and reduction gear box
• Dual speed motor for slow and fast mixing action.
• Scrapper is made from Teflon.

• Ac Frequency Variable Drive.
• Mixing bowl with heating / cooling jacket and insulated.
• No. of Mixing Blade : Single Blade/ Double blade/Triple Blade.
• Type of Blade: Paddle Blade/ Anchor type/Hart Shape Blade
• Centre located and top mounting high speed homogenizer.

• Emergency stop button
• Limit switch at top lid
• Over load protection by relay.

The Vacuum transfer system is unique dry material transfer system for dust free and avoid to human touch. The vacuum transfer system is used in Pharmaceutical, Food, Agro Chemical, Sugar Industries and chemical. The system is use full for inline milling, sifting, blending, loading and unloading.

The principle of vacuum transfer has been proven to be a better way to move many types of material and a giant step over manual handling. The technology exists for moving virtually any material that can be pulled through a hose or tube. The system is consisting of Blower, Vacuum receiver system with filter, cyclone filter and Pipe.

The vacuum conveying systems designed specifically for the direct charge loading of blenders, mixers, sifter, milling, reactors or any vessel capable of withstanding a vacuum. The vacuum system can be provided mobile type with lifting provision to move one room to another room for loading and loading any machine.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Capacity available 100 Kg to 5000 Kg/hr.
• Can be used for transfer of products having bulk densities up to 1.0gm/cc.
• Total Discharge no Retention.
• No segregation or degradation of Product.
• No tool required for opening & cleaning.
• Transfer can be completely automatic to avoid the manual handling of the material.

The metal detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations in tablet. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worm sieve wires or splintered dies. This metal detector removes metallic contaminants automatically and without production interruption from a stream of tablets or capsules. A metallic contaminant in the product change the high frequency field within the detector coil, which in turn activates a reject flap by pneumatic solenoids. The metallic contaminant is reliably rejected with very little loss of material due to the extremely fast and short activation of the reject flap. The metal detector chute can be quickly and easily dismantled for routine cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet Press with Deduster Unit. Flexible operating height, angle and frame with lockable castor to allow for easy integration to any production facility.

The Metal detector incorporates a simplified and refined design of automatic Balance Coil Principle, which eliminates all setting up controls and permits long consistent performance.

• The Machine construction and components in accordance with cGMP standard.
• All contact parts AISI316 Quality and Non contact parts AISI304 Quality.
• Automatic Balance Principle.
• Manual set up of sensitivity all other parameters through potentiometers.
• Easy to install and operate.
• Easy changeable electronic module.
• Easy to cleaning and movability.
• Search head 180 rotations and inclination 0-30.
• Solid- state relays for arc free switching.
• Continuous operation.
• Adjustable height Single pillar stand with 4 nos. castor wheel.
• Food grade nonmetallic white chute having authentic certificate designed in one piece (closed) to avoid cross contamination.

The Laboratory Scale Stirrer / Agitator / Homogenizer is applicable to blending, dispersing, homogenization, mixing of liquid, ointment, solution, viscous material and solid-liquid in the pharmaceutical, chemical, food, color and dye, cosmetics, as well as the plastics industry.

Stirrer / Agitator/ Homogenizer mix two or more Liquids to Required Results. It consists of two parts 1) Drive 2) Impeller. This is direct drive stirrer with homogenizer blade.

• Design is cGMP - Current Good Manufacturing Practices compliance.
• All contact parts AISI 316 & non contact parts AISI 304.
• Capacity available for volume of 2 liter to 25 liter for lab and Pilot scale.
• This intermittent type high-shearing homogenization emulsion machine is high-powered stirring system.
• Option for type of Blade like (1) Propeller ( 2) Slotted (3)Homogenizer.
• The stirrer assembly is mounted on Telescopic stand.

SHREE BHAGWATI believe in creating a close working partnership with our customers and we will support you through every stage of the tooling procurement process from design / specification to maintenance and aftercare.

SHREE BHAGWATI recognizes the importance of quality, value, delivery and customer satisfaction. We also recognize the importance of producing our tools to your specifications each and every time. Thats why we have taken the lead in developing quality tableting systems to ensure you are comfortable we can meet those expectations on every order.

• Quality Dies & Punches as per world standard.
• Premium S7 Steel for all punches.
• D3 Steel Standard for all dies.
• Multi-Tip Tooling.
• Carbide lined dies.
• Free Tooling Certifications.
• Inspection Report for each & Every Die & Punch.
• Inspection Kit of Dies & Punches.
• Die & Punch Polishing Kit.
• Storage Systems for Tablet Tooling.

• All exposed parts of S. S. or Aluminium to avoid any rusting.
• Reduction Gear ensures jerk free and Noiseless performance.
• Square Frame imparts Vibration free performance and allows absolute cleanliness even inside.