Shree Jee Tiles - Miscellaneous

FEATURES & SPECIFICATION

• Brick walls, which have been traditional to India, are time consuming to erect and costly to keep standing. Our Precast Concrete Boundary Walls overcome these handicaps of traditional brick walls. Our Precast concrete boundary walls are fast and easy to construct and have a virtually unlimited life. These walls are low maintenance and do not deteriorate with time. 
• Our Precast Concrete Boundary walls are made from posts erected directly into the ground which have grooves to accommodate textured panels. We currently offer boundary wall systems of 6 feet, 7 feet and 8 feet height. The textured panels are available in two varieties. Our brick finish textured panels closely resemble real bricks and create a classic ambiance. Our polished finish panels create a stylish ambiance while maintaining affordability. 
• Our Precast Concrete Boundary Wall system is ideal for residential, commercial, and industrial developments.

FEATURES & SPECIFICATION

• Affinity to Cement Mortar intense affinity to crystal growth between brick and
• Cement mortar.
• Efficient heat-insulating properties.
• Resistant to water seepage problem.
• Highly durable as its strength
• Increases with time.

FEATURES & SPECIFICATION

Concrete is basically a mixture of Portland Cement, water and aggregates comprising sand and gravel or crushed stone. In traditional construction sites, each of these materials is procured separately and mixed in specified proportions at site to make concrete. Ready Mixed Concrete, or RMX as it is popularly called, refers to concrete that is specifically manufactured elsewhere and transported in a Transit Mixer for delivery to the customers construction site in a ready-to-use freshly mixed state. RMX can be custom-made to suit different applications. Ready Mixed Concrete is bought and sold by volume - usually expressed in cubic meters.

FEATURES & SPECIFICATION

Fly ash is one of the naturally-occurring products from the coal combustion process and is a material that is nearly the same as volcanic ash.The most common use of fly ash is as a partial replacement for portland cement used in producing concrete. Fly ash concrete has increased strength and durability, which means it can handle greater loads, is more resilient and lasts longer. Fly ash concrete can withstand harsher service environments than straight portland cement concrete. Fly ash concrete costs less. Depending on what area of the country you are in, fly ash can be 20% to 60% less expensive than portland cement. In some cases, portland cement can be more than twice as expensive.  However, there have been few instances where fly ash was shipped long distances and sold for higher prices than local portland cement because the concrete durability requirements could only be met using fly ash.Fly ash has similar chemical composition to that of portland cement, shale and volcanic ash. Similarly to these materials, fly ash contains naturally occurring trace elements that are also found in rock and soils. 

FEATURES & SPECIFICATION

• Spacers, also known as cover blocks, provide the specified concrete cover to the reinforcement used in RCC construction both before and during concreting.
• Shree Jee Tiles manufactures spacers from plastic and fiber concrete for both horizontal and vertical applications, i.e., slabs, beams, columns, walls, etc.

We are the leading Manufacturers, Traders and Suppliers of FRP Dustbins

Features : 

• Eco friendly
• Easy to use
• Spacious
• Size : 3-4ft
• Garbage to be put from animal mouth and door at back to remove the garbage

FEATURES & SPECIFICATION

We hold expertise in offering our clients an exceptional array of RCC Pipe that is valued for high strength and durable results. Our entire product line is manufactured using quality assured raw material and advanced technologies. RCC Bench is functionally advanced.

Features:

• Heat resistance
• Easy usage
• Durability

FEATURES & SPECIFICATION

• OVERALL DIMENSION:  Height:2310mm (7ft 6.8inches); Width: 1010mm (3ft 3.76inches); Depth: 1220mm (4ft)
• Frame and Panels are manufactured from RCC using M-30 grade of Concrete
• Door is manufactured from 12mm thick laminated cement particle board (BISON or equivalent)
• Side RCC panels are 25mm thick while the bottom panel is 40mm thick
• Suitable hinges are provided for the door to swivel
• A unique lock is provided to close the cabin when in use
• All RCC components are reinforced suitably to promote long use and to prevent damage during handling & transportation

FEATURES & SPECIFICATION

We are listed among the top FRP Raw Material Manufacturer and Supplier. We offer superior quality Gelcoat Unsaturated Polyester Resins that are developed using industrial-grade materials that offer excellent strength and durability to them. Moreover, our Isophthalic Unsaturated Polyester Resins are widely used in numerous industrial applications such as plastics, textiles, and many others. Today because of the excellent quality and unmatched chemical and more.

FEATURES & SPECIFICATION

Overview:

Traditionally in India, manholes for providing access to telecommunication and sewer lines have been made from bricks. However, brick manholes are time-consuming to build and are not structurally strong. Recognizing these problems, KK developed and introduced the conical manhole assembly system. The conical manhole assembly system has now being overwhelmingly accepted by the telecom majors and is the predominant system used to provide access to underground telecom cables.

The conical manhole assembly system consists of conical rings (each of height 225 mm) made from precast reinforced concrete that can be stacked one on top of the other to construct a conical shaped manhole. In addition, a precast concrete frame and cover are also provided at the top.

This system allows the flexibility to customize the height of the manhole to suit the application. Based on the number of rings used, the height of the manhole can vary from 0.5 meters (3 rings) to 1.9 meters (15 rings). In telecom applications, conical manholes of height of 0.5 meter, 1 meter, 1.225 meter, and 1.45 meters are primarily used.

Specifications:

• Each ring is reinforced with 2 nos. 8 mm dia torr steel rings and 8 mm dia stirrups at 150 mm c/c/ along the periphery while the cover is double-reinforced with 8 mm dia tor steel at 100 mm c/c in the first plane and 8 mm dia tor steel at 50 mm c/c in the second plane.
• The cover also consists of a 2mm thick ms sheet at the outer periphery and 2 nos. 16 mm dia lifting hooks. Both the MS sheet and lifting hooks are hot dip galvanized to ensure long life
• All components are made from M-30 grade concrete using vibro compaction process

FEATURES & SPECIFICATION

• Minimum 3 mm thick Polypropylene copolymer is injection moulded around a 12 mm dia tor-steel bar
• Orange Color
• Minimum overall length of 260 mm and width of 165 mm
• Protruding legs have a 2 mm tread on top surface by dots for providing an antiskid surface
• Designed to withstand the bend test and chemical resistance test as per specification
• Polyproplyene copolymer conforming to ASTM D-4101/IS-10910
• 12 mm dia Fe-415 Steel reinforcement conforming to IS - 1786