Listing ID #2412638
Company Information
Ask for more detail from the seller
Contact SupplierThe Solar Flat Plate Collector based systems are available in two modes – passive and active systems. Passive systems consist of an array of Solar Flat Plate Collectors, insulated hot water storage tank. A set of pipes connects the tank with the Collector array. The system works on simple Thermo siphon principle. There are no moving parts, electrical sensors or any complicated gadgets in this type. These systems are most suitable where output temperature need not be fixed. Active systems have a pump that feeds water to the collector array. A control panel activates the pump when the temperature of water in the collector array reaches the preset value. Active systems are preferred for systems above 3000 LPD or where the application is commercial or industrial. In addition to the Flat Plate Collector Systems, our company supplies all glass evacuated tube collector based ETC systems. The systems are suitable for small families as well as where the water available is hard.
Description | Specifications |
---|---|
System Capacity | Any LPD |
Tank Capacity | ANY LPD |
Circulation | Thermosyphon Non Pressurized System |
Application | Any purpose Use |
Option 1. Solar Flat Plate Collector | |
Collector Design Type | Indian |
Type of absorber | Selective Black chrome with Nickel Undercoat |
No. of Risers | 9 |
Riser Tube | Copper tube dia 12.5mm x 0.55mm thk. |
Fin Material | Cu 0.10 mm thick |
Header Tube | Copper tube dia 25.4 mm x 0.72mm thk x 1120 mm length |
Size of collector | 2030 X 1030 X 95mm |
Glass | Toughened glass 4mm thick |
Transmittance of glass | Up to 87% |
Solar Absorptivity | 0.97 |
Solar Emmisivity | 0.12 |
Frame Material | Aluminum-PU coated |
Collector Body | Box Type Structure |
Insulation | Glass wool and Rock wool |
Insulation Thickness | Back Insulation - 50mm thick, Side Insulation - 25mm thick |
Insulation density | 48 Kg/mtr cube |
Dry Weight | 48 Kg |
End Connections | Free / Brass flanges |
Hardware | Stainless Steel - SS 304 |
Back Al. reflector | Aluminum reflector foil - 50 micron thick |
Side Al reflector | Aluminum reflector foil - 20 micron thick |
Testing Pressure | 1 bar |
Efficiency | More than 65% |
Grommet | EPDM |
Glass Beading | EPDM |
Description | Specifications |
---|---|
Capacity of main storage tank | System capacity is equal to volume of storage tank |
Material of Construction | Mild Steel with Ceramic coating |
Dimensions of tank | As per requirement |
Insulation Material | Rock wool |
Thickness of Insulation | 100mm |
Density of Insulation | 48 Kg/meter cube |
Insulation Cover | Aluminum 24 swg |