Shyam Instruments and Calibration Services

Makarpura, Vadodara, Gujarat

lux and foot candle measurement, auto power off, lo-battery indication, measures up to 199, 900 lux / fc

Multifunction Power Meter, works on 6A, 230V, indicates, voltage, current, power factor, Power, KWh, Calculates CO2 emission, Calculates total time the equipment is under test and calculates the cost of electricity consumed accordingly. During load shedding the instrument memorizes the readings, ideal for analyzing power consumed for different kinds of loads

Digital Vibration Meter, measures velocity, acceleration and displacement

Non Contact Type High Voltage Detector for presence of Voltage from 50V to 132kV with Buzzer and Light Indication.

Solar Power Meter, to measure the amount of sunlight falling on the solar panel or any surface exposed to sunlight.

• IP10-from Terminal Side
• IP65-from Frontal Side,
• RTC, 3 Colour Display
• 2 Relay O/P,
• Analog O/P-Programmable
• Digital OC output,
• RS485Output

• Destined for measurement of d.c. voltage or d.c. current, temperature through Pt100 resistance thermometers, J, K thermocouples, a.c. voltage and a.c. current.
• 5 LED digit displays with 14 mm digit high.

• Parameters programmable by PD14 programmer:
  • Precision of displayed results (decimal point),
  • Measurement averaging time,
  • Recounting of indications (individual characteristic),
  • Automatic or manual compensation: cold juncti on temperature for measurement with thermocouples or wire resistance for measurement with Pt100 (N25T).

• Universal input for the measurement of d.c. current, d.c. voltage and temperature,
• 3 or 7-colour bargraph,
• Programming of bargraph colour depending on the measured quantity value,
• Signalling of set alarm value overflow,
• Storage of measured signal in programmed time segments (750 samples),
• Current or voltage analog output,
• Communication in SCADA systems (RS485/Modbus interface RTU and ASCII).

The transformers winding resistance meter that we supply to our customers is designed to measure the winding resistance of the inductors, transformer, motor windings, generators, bus bar contacts, power cables and much more. Shyam Electronics & Electricals, Gujarat is the best supplier and distributor of transformer winding resistance meter. We have products that are quality assured and top class. The products that we have are manufactured by the best manufacturers in the country.

These are specially designed for highly inductive objects. This gives a very fast reading for all kinds of transformers. The built-in open circuit features voltage of DC supply ensures that the core of the transformers is saturated for fast measurements to be taken. Care is taken to absorb the back the current through winding under measurements is discontinued or disturbed.

We provide our customers with wholesale transformer winding resistance meter supplier in Vadodara India. Our instruments are a regulated and highly stable specifical current source with the current selection. This instrument uses a radiometric circuit where the resistance of the specimen is compared with the known internal standard and 4 1/2 digit LCD which is provided for the resistance measurements in the milliohms and ohms.

Features

It is highly stable and can be regulated according to your needs.

It has an LCD and it can be used for 19999 counts.

Simultaneous measurements of currents and voltage.

True four-terminal measurement.

Protection against the use of inductive kickback and also discharge.

Resolution of around 0.1 micro ohm.

Time vs current plot for OLTC.

The visual indication for the discharge.

Automatic discharge.

Thermally protected power supply.

Lightweight carrying case.

Temperature-compensated value for aluminium and copper.

Contact us and get every detail about our product and business policies. We have executives you will provide you with all the important details. We believe in transparent business policies and therefore ensure that our products meet the needs of one customer and clients.

• Available in Size 72mm x 144mm.
• DC Current ranges and
• DC Voltage ranges.
• 4 ½ Digit ultra bright Display.
• User defined caption
• Auxillary Power Supply :
  • AC – 230V (+10% / -15%).
  • AC – 110V (+10% / -15%).
  • DC – 110V (+10% / -15%).
  • DC – 24V (+/- 15%).

Are you looking for digital clamp-on power meter? Our company Shyam Electronics & Electricals based in Gujarat is one of the best company for getting digital clamp for industrial and commercial purposes. We take orders in bulk and deliver products always on time. The clamp meters we have is of amazing quality and reasonable price.

As the name suggests the clamp or the jaws are used for the measurement. This is placed around the wire which you want to measure. This is used by people for various purposes which includes AC/DC voltage, frequency, AC/DC, capacitance and much more. This is a very handy tool and it cannot break or disconnect the circuit. The power generated clamp meters are the same as the digital Multimeter which has amazing features and characteristics. These are easy to handle and anyone can use it without any trouble.

Benefits Of Choosing Our Clamp Meters

There are plenty of benefits of choosing our clamp meters some of which are as follows:

• This can be used even in places that are noisy and loud.

• Our clamp meters or testers are designed to filter the noise and to provide you with stable and accurate measurements like motor starting currents.

• The manufacturers have designed our clamp meters which fit perfectly in your hand even if you are wearing protective gears and equipment.

• You can use it in the automation and process environment which is not at all feasible to break the loop.

• This can help in measuring low-level DC.

• You can use our clamp meters even in compact and tight locations.

• This is used for a wide range of measurements.

• You can save both money and time using our clamp testers because it generates results faster.

Order our products as we are the best wholesale digital clamp-on power meter supplier in Vadodara India. Contact us over the call or send us an email if you have any question or query.