Back Boring Tools are a combination of Back Boring, Facing & Chamfering tools which are custom built for specific applications. They are developed with Rhomboidal & Triangular inserts with Screw-on Type Clamping.

Solid drilling tools, (without pre-bore) with indexable inserts, usually called U-Drills are mounted with centre cutting and peripheral cutting inserts with helical flutes. In most of the cases, they are two insert designs: single tip, with diagonally opposite cutting edges called as Spade Drills and for bigger diameters they can be configured with more than two inserts. These drills are also designed combining boring, facing & chamfering operation in one tool.

Face mills are used for machining thru flat surfaces, generally while preparing the parts with perfect vertical surfaces all-round. They have an approach angle for cutting, which is non-vertical, commonly designed at 75, 60 & 45 approach angles. Further they can be categorized into, integral shanks and assembled holders where the body material can be either steel or aluminum depending on machining conditions.

Guided tools are combination tools which are used for bore tolerance and concentricity of the bore or line of bores, which are very critical. This is achieved by fixing carbide guide pads in strategic positions, immediately after the cutting edges, so that the tool is kept in position with minimum vibration & concentricity. The difference between diameters of cutting edge and the guide pads is minimum due to Guided tools.

These are external turning indexable turning tool holders, which are generally used on conventional lathes and CNC turning centres. The holding shanks are either square or rectangular where the insert mounting can be with lever, top finger clamp or a combination of both, screw on type etc depending on insert configuration.

Valve seat tools are made to machine the seating area of the automobile inlet and exhaust valves, which are commonly three angle configurations. The tools can be integral adopter or two-part designs mounted with CBN bites which are adjustable axially. There can be a single tool for roughing and finishing of each of inlet & exhaust seating area, or there can be separate tools for roughing and finishing. The adopters can be BT, HSK or as suited for the machine.

Rollers specially for hot steel rolling mill conveyor systems, are manufactured as per requirement. Unless specified by the customer, the raw material used for manufacturing of these rollers, are D2 & D3 (Die -Steel Grade) and are Heat-treated to HRc 65-68.

Back Boring Tools are a combination of Back Boring, Facing & Chamfering tools which are custom built for specific applications. They are developed with Rhomboidal & Triangular inserts with Screw-on Type Clamping.

Solid drilling tools, (without pre-bore) with indexable inserts, usually called U-Drills are mounted with centre cutting and peripheral cutting inserts with helical flutes. In most of the cases, they are two insert designs: single tip, with diagonally opposite cutting edges called as Spade Drills and for bigger diameters they can be configured with more than two inserts. These drills are also designed combining boring, facing & chamfering operation in one tool.

Face mills are used for machining thru flat surfaces, generally while preparing the parts with perfect vertical surfaces all-round. They have an approach angle for cutting, which is non-vertical, commonly designed at 75, 60 & 45 approach angles. Further they can be categorized into, integral shanks and assembled holders where the body material can be either steel or aluminum depending on machining conditions.

Guided tools are combination tools which are used for bore tolerance and concentricity of the bore or line of bores, which are very critical. This is achieved by fixing carbide guide pads in strategic positions, immediately after the cutting edges, so that the tool is kept in position with minimum vibration & concentricity. The difference between diameters of cutting edge and the guide pads is minimum due to Guided tools.

These are external turning indexable turning tool holders, which are generally used on conventional lathes and CNC turning centres. The holding shanks are either square or rectangular where the insert mounting can be with lever, top finger clamp or a combination of both, screw on type etc depending on insert configuration.

Valve seat tools are made to machine the seating area of the automobile inlet and exhaust valves, which are commonly three angle configurations. The tools can be integral adopter or two-part designs mounted with CBN bites which are adjustable axially. There can be a single tool for roughing and finishing of each of inlet & exhaust seating area, or there can be separate tools for roughing and finishing. The adopters can be BT, HSK or as suited for the machine.

Rollers specially for hot steel rolling mill conveyor systems, are manufactured as per requirement. Unless specified by the customer, the raw material used for manufacturing of these rollers, are D2 & D3 (Die -Steel Grade) and are Heat-treated to HRc 65-68.