Other Products / Services #3835654

Ours is a Chiplun (Maharashtra, India) based organization involved in offering reliable adhesive flooring services. We have a team of professionals that is proficient in conducting the adhesive flooring service. We make use of advanced machines and techniques for conducting the flooring service with ease and within the promised time frame. We make sure to provide excellent finish in our flooring work. Customers can contact us anytime to obtain our services at reasonable charges.

ELA TOBOND PU (HWC) is single component water base polyurethane wall coating for interior walls which form flexible and tough film which creates hygienic surface  treatment on interior walls.

Water proffing system using Nano technology & Multi ceramic Technology

• Terraces & Parapet Walls
• Total system Gives High water resistance vapour permeable, resistance to moisture, UV Stable, Heat Resistance.
• Bondcrete HR is polysilloxance base coating acts as a base coat and elastobond is top coat which eliminates conventional brick bat coba system also eliminates replastering of parapet and exterior damp walls.
• Bondcerte HR, Polysiloxance base coating all nanoparticles penetrate into cracks, ar the same time multicreamic technology base particles float on the top to bottom of the coating which creates water resistance and hydropobicity. due to the combination of nano and multicreamic technology product gives high performance at the same time gives high dft with high coverage.
• With the help of nanotechnology and multicreamic technology we creates high performance waterproofing Parameters are as follows :
  • Water repellent.
  • Water Impermeablility
  • Water vapour permability
  • Hydrophobicity
  • Uv stability
  • Heat Resistance
  • High Interness
  • High Penetration

Due to nano technology product gives high coverage as well as high dft because nanoparticles covers high surface area. when nanoparticles reacts with multicreamic particles crosslink with each other and when it desires cross link networl expand 100 times and we get high dft  and high coverage.

SMACSIL -C is an inorganic formulation specially designed for concrete in Indian climatic conditions. Intelligent chemicals in SMACSIL-C penetrate & chemically react with the ingredients of solidified concrete & produce numerous non-soluble nano crystals in the concrete matrix. These crystals seal the pores & capillaries in concrete. This process seals & densifies concrete and makes it water tight almost permanently.

Reaction Mechanism : Intelligent chemicals in SMACSIL-C react with free lime in the solid concrete & produce Tri calcium Alumina Silicate Hydrate in nano crystal form. This is a water insoluble material. These crystals are spread throughout the matrix of the concrete including the pores & capillaries. Thus, SMACSIL -C hydrates the concrete completely and improves its quality in respect of water tightness, life & strength.

Advantages :

• Penetrates & seals the concrete against water, mild acids and alkalies.
• Increases strength of concrete by about 10% than untreated concrete.
• Resists carbonation of concrete.
• It resists staining of concrete and improves the bond with plaster.
• It is Ultra Violet stable product.
• Increases surface hardness of concrete. Makes concrete more durable & maintains it in good service condition.
• Can be applied from negative side.

Applications :

• Terrace slabs - Jetties, bridges
• Concrete basements - Terrace gardens
• Concrete roads - Swimming pools
• Columns & Beams - WC areas
• Industrial concrete floors - Any concrete structure requiring protection Concrete reservoirs

Application Procedure :Remove all the loose materials to expose the base concrete. Wash the concrete with plenty of water Wash the concrete with 10% muriatic add solution. Again wash the concrete with plenty of water Let the concrete dry to SSD (saturated surface dry) condition. Fill all the cracks, honey combs, voids at using our BONDCRETE RP repair compound. Apply SMACSIL-C, liberally by brush or spray over the concrete surface. Allow the surface to dry for 24 hours. Protect the treated surface for 48 hours from direct water splashes, rains, foot & other traffic and scorching heat of the Sun. For water retaining structures, let the treatment dry for 72 hours and then fill water into it. Wash all the tools with water & soap. For negative side application, apply two coats with an interval of about two hours between each coat application

Caution : Protect from splashes on skin & eyes. Use protective gear like goggles, hand gloves etc. In case of accidental splashing, wash with plenty of water. In case of ingestion, do not induce vomiting & immediately seek medical assistance.

SMAC ELASTOBOND PU is aliphatic polyurethane polymeric base anticorrosive cum thermal insulation coating made from latest multi ceramic and nano technology.

Advantages :

• Reduces Temperature 10 to 15^oC
• No Primer Required
• Thermal Insulation
• Eco Friendly
• Corrosion Resistance
• Chemical Resistance
• Water Resistance
• Solvent Resistance
• Anti Fungus

Techinal Data :

• Base - Alliphatic Polyurethane Polymer
• Solid Content - 50-52 %

Application Areas :
Industrial Metal Roof - Chemical stroage Tank, pipe line, pumps, valves, motors, construction machinery air conditioning duct, transformers and all steel structures where corrosion resistance & reduction of heat is desired.

Packing : 20 kg, 50 kg

Shelf life : 12 months sealed Container

Polyurethane Sealant (SMAC ELASTOSEAL)has earned loads of accolades to the firm as there is no alternative available. The unmatched quality and unmatched performance has also played a vital role in the enhancement of the demands of the Polyurethane Elastomeric Sealant in the Indian Market. In addition to this, catering the exact requirements of the clients, the company is listed as one of thepreeminent Concrete Joint Sealant Manufacturers, based in Mumbai (Maharashtra).

• After installation, no visible crack-filling marks are there.
• Can be installed on damp plaster or concrete.
• Resistance to alkali silica reaction (ASR).
• Elastomeric and remains permanently flexible.
• UV stable.
• Excellent adhesion on cementitious substrate.
• Eco-friendly, being water based composition.
• No sanding of the surface is required while installing SMAC ELASTOSEAL.

• Internal and external plaster cracks.
• Tremix floor joint seals.
• Beam-masonry and column-masonry joints.
• Expansion joints.
• Construction joints.
• Flexibility: 300%.

Advantages : Eco friendly being water base. lt densifies concrete and mortar due to Nano particle size and saves cement 10 to 12%, Resistant to map cracking. Resistant to bleeding and segregation of concrete and mortar. It does not leach out or decompose because it forms integral part of concrete and form water tightness in concrete and mortar. No sodium or potassium ions are present in SMACSIL-IWP. Hence it does not create Porosities in mortar hence water tightness remains permanently in SMACSIL-IWP modified mortar, It reduces water curing time, only 3 day water curing is required instead of 7 days.

Properties :

• All in One Formula
• Admixture
• Waterproofing Agent
• Water Curing Saver
• Porosity Reducer

Application Procedure : Mix 200ml SMACSIL-IWP for every 50 kg of cement first add 60 to 70% water in Cements and, Concrete Mixture, then mix SMACSIL®-IWP in balance 30% water, then add this mixture in wet mixture of cement, sand and aggregate then mix in mixer for 3-5 minute.

Precautions : Do not exceed mixing dosage SMACSIL-IWP of and do not add SMACSIL®-IWP in dry cement sand and aggregate.