Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Multi Effect Evaporator and Forced Air Evaporator.
Sn Aqua System involved in offering the wide range of multi effect evaporators.The multiple-effect configuration combines two or more evaporator bodies to conserve steam, which is condensed in the first-effect heat exchanger only. Water evaporated in the first-effect vapor body is condensed in the second-effect heat exchanger, which provides energy for evaporation in the second-effect vapor body (and so on for additional effects). Vapor from the last effect flows to a condenser.
The last-effect vapor body is maintained at a high vacuum with a steam-jet air ejector or mechanical vacuum pump. The driving force is the pressure drop from the first to the last effect.
For the same overall pressure differential and process conditions, the evaporator with more effects will require less steam.
The chief factor influencing the economy of an evaporator system is the number of effects. By increasing the number of effects we can increase the economy of an evaporator system. The first effect of a multiple effect evaporator is the effect to which the raw steam is fed, vapors obtained from first effect act as a heating medium for another effect.
We offer the following MEE:
Forced Air Evaporator Unit is a solution for evaporation of water out of the rejected effluent with friendly environmental way.
Generally at Lagoon, only Upper thin layer of water gets natural evaporation. Such quantity is much less as compared to generation of large quantity of effluent. Thus a requirement is felt by the Industry for faster and efficient mechanical solution. We have developed an evaporator unit such that very fine size of water particles are generated and are forced to mix with high volume of Air and are then flown in to the atmosphere to take advantage of evaporation in abundant quantity of atmospheric air.
Design of EvaporatorThe theory of the evaporator is to mechanically expose more quantum of water mixed with compressed air in to the atmospheric air and to keep that water particles aloft long enough to evaporate them naturally. To achieve this performance we have designed Bipolar nozzles in which Air and water feed simultaneously to produce and send water droplets in to the air for long time to keep them aloft for long distance to evaporate them naturally.
For the same we recommend a pump with pressure of 50 mtrs Head and Air compressor with 6 kg/ pressure.
As per general observation, about 60 to 70% of the water spray pump capacity would be evaporated in to the atmosphere on the driest day of the year.
Water spray capacity of the pump, about 70% to 80% volume of the same would
be maximum evaporated and thus it is estimated that about 70 to 80% of pure water would be evaporated from the sprayed mist.
Actual evaporation capacity will depend on percentage humidity, temperature condition, air wind velocity etc. on a respective day and thus above details are true for estimation only and may vary as per atmospheric condition. To reduce the cost of making Tower we can use you roof top to install the same.
Sushil Ghorawat (Sn Aqua System Inc.)
14/2, Radheypuri Extn.-2, Near Vespa Showroom, Jagatpuri Delhi-110051, Krishna Nagar, India
Share us via
