Diesel Flow Meter aluminum oval gear meter has the ability to handle a wide range of fluid viscosities with exceptional levels of reparability chemical, food industry etc.

Technical Features:

• High Accuracy, LCD Display


• Easy to install, Read & Operate digital display.


• Horizontally and vertically flexibility of installation options.


• 5 digital liquid crystal display


• Lit/gallon options.


• Reset button


• Correction factor


• Operated on 2 alkaline battery


• Accuracy: 0.5%


• Flow range:7-40LPM


• Max Temp: -70C


• Max pressure: 7 bar

SN AQUA series SNA-TF are turbine flow transmitter specially used for various industrial applications. The flowing media engages a vane rotor causing it to rotate at an angular velocity proportional to flow rate. The pickup coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to electrical signal to 4 to 20mA.

• Simple & Cost Effective Construction


• Suitable for non-conductive liquids.


• Local Display


• Durable & Versatile


• Easy Maintenance


• Remote Display Option Available

Ultrasonic Flow

Ultrasonic flow is widely used in long term measure at field. It's easy to in water, heating withoutcut off the flow. It has the advantages of small size, low price, and easy operation and with variousfunction of output interface. It can be used in Water, Heating Water conservancy, Metallurgy, Chemical, Machinery, Fertilizer, Pharmaceutical, Sugar, Paper& Pulp, Steel, Cement Water & Waste Water Management & Energy and other industries.

• It can be used I water heating, water conservancy, metallurgy, chemical industry, energy and other industries.


• Can be used as production monitoring, flow quantity checking, temporary detection, traffic inspection water balance test detecting when flow.


• Easy to install without interrupt fluid, no damage for pressure.


• It can measure the temperature out of the pipe, compute the quantity of heat.


• Sewage with small particle content.

Output : 4-20 mA, RS485, MODBUS

Turbodity : 10, 000 pm not so much bubbles.

Type of liquid:Water, Seawater, Waste Water, Oil, Chemical, (alcohal , Acid etc), Plant effluent andother liquid

Cable : Twisted pair cable-50mcters length

Power supply : 8-36VDC, 85-265VAC(Optional)

Consumption: 1.5W

Pipe Material : Steel, Stainless Steel, Cast Iron, Copper, Cement Pipe, PVC, Aluminum, Glass Steel, product line is allowed.

Electromagnetic Flow Meter adopts the technology of insertion of single chip to realize digital excitation main line.

It can realize site indication and output electric current signal of 4-20mA which can be used to record, regulate and control. Now electromagnetic flow meter are widely used in industry sectors such as Chemicals, Pharmaceuticals, Paper, Metallurgy, Sugar fertilizer, food & beverages, Sugar, aluminum, steel, cement , water& waste water, etc.Besides measuring the flow rate of general conductive liquid electromagnetic flow meter can measure the flow of volume of liquid-solid mixed fluid. High-viscosity fluid and salt, strong acid and alkali.

Key Features:

• Simple structures, reliable, no movable parts and long operation life.


• No parts of intercepting fluid, no pressure loss and fluid clogging.


• No mechanical inertia, quick response and good stability, application in automatic examination, regulation and controlling.


• Measuring accuracy is uninfluenced by the physical parameters such as type temperature, viscocity, density & pressure.


• Employment of Teflon or Rubber liner and different combination of electrode materials such as HC, HB, 316L, Ti and meet the need of different mediums.


• Adopt EEPROM memory, measuring operation data, safe and firm protection of memory.


• Integral type flow meter and detachable type flow meters.


• LCD illumination display with high clearness.

UFMN 2000 Ultrasonic Flow Module/RTU

Ultra Sonic Flow Meter can realize the flow of liquid, and it does not touch the liquid. The sensor justbeen installed on the pipe outer wall, then it can finish the measurement of flow. The sensor withsmall volume, convenient caring, exact measuring. It can be used in Water, Heating WaterConservancy, Metallurgy, Chemical, Machinery, Fertilizer, Pharmaceutical, Sugar, Paper& Pulp.Steel, Cement V'ater& Waste Water Management & Energy and other Industries.

Special Feature

• Large screen LCD.


• Built I data logger.


• The built In high capacity nickel hydrogen rechargeable battery can support the flow meter continues working 12 hours to.


• It can display cumulative flow, volume flow, and speed at the same time.


• Choose different type of bracket mounting, can realize the diameters of DN 15mmTO DN 6000mm tube measurement channel flow.


• 
  
  
  

  Technical Specification:

  
  

  
  

  Principal : Transit time gap

  
  

  Size :15mm to 600mm

  
  

  Accuracy: 1%

  
  

  Display :LCD with Back light

  
  

  Temperature : 30C-160C

  
  

  Flow Speed : 0-10m/s

  
  

  Output :4-20 mA, RS485, MODBUS

  
  

  Turbodity :10, 000 pm not so much bubbles.

  
  

  Type of liquid :Water, Seawater, Waste Water, Oil, Chemical, (alcohal , Acid etc), Plant effluent andother liquid

  
  

  Cable : Twisted pair cable-50mcters length

  
  

  Power supply :8-36VDC, 85-265VAC(Optional)

  
  

  Consumption : 1.5W

  
  

  Pipe Material : Steel, Stainless Steel, Cast Iron, Copper, Cement Pipe, PVC, Aluminum, Glass Steel, product line is allowed.

  
  
  
  


•