Snr Electronics

Kupwad, Sangli, Maharashtra

Auto Start Unit

\r\n

Features

\r\n

\r\n
• Protection from Voltage Unbalance, Single Phasing, Reverse Phasing.
\r\n
• Operates on low voltage (from 200 V)
\r\n
• Useful for 3 Ph. 1 to 50 H.P, Openwell, Submersible. Monoblock Pumpsets.
\r\n
• Seperate Indicator for supply sequence ok.
\r\n

Features

\r\n

\r\n
• Suitable for Openwell Submersible Pumps,
\r\n
• Available for 0.5 to2 H.P. units.
\r\n
• MCB Overload Thermal Protection.
\r\n
• Current indication by analog meter
\r\n

Features

\r\n

\r\n
• Micro Controller Based Technology. Suitable for 2Ph. upto 7.5 HP Sub. Pumps.
\r\n
• Voltage & current shows & fault shoown LsED Display.
\r\n
• Auto Start cap. cut facility.
\r\n
• Overload trip time IDMT.
\r\n
• Dryrun trip time 10 Sec.
\r\n
• High Voltage & Low Voltage Optional.
\r\n
• 25 A- 4 Pole contactor used to isolate both phase.
\r\n

Features

\r\n

\r\n
• Useful for 3 PH. motor upto 7.5 H.P.
\r\n
• Direct online, Air break push button type
\r\n
• With thermal overlaodprotectionrelay.
\r\n
• No Volt coil voltage from 275 V to440 \'V operating
\r\n
• Heavy powder coated encloser
\r\n

Features

\r\n

\r\n
• Microcontroller based technologySuttable for Openwell Sub.Pumps
\r\n
• Available for 0.5 to2 H.P. Pumps.
\r\n
• Digital Ammeter & Voltage indication.
\r\n
• After Dryrun Restart Timer (Settable)
\r\n
• Dryrun overload \"o setiable
\r\n
• 2 Tank WLC Facility. (In WLC/AS)
\r\n
• Auto/Manual Facility. (In WLC/AS)
\r\n

Feature

\r\n

\r\n
• Micro Controller Based Technology.
\r\n
• Useful for 1 Ph. Sub Contacter type panels to Autostart after supply come back.
\r\n
• Starting cap. timer upto 3 sec. cutoff Auto/Bypass facility.
\r\n
• Separate indicator for OK & timer,
\r\n
• Operates on 170 V to 230 V 1 ph. supply.
\r\n
• For 1 Ph, Sub Panel
\r\n

Features

\r\n

\r\n
• Microcontroller base Technology
\r\n
• Suitable for 1 Phase openwell submotors,
\r\n
• 0.5HPto2HP single model.
\r\n
• Easy to operate and install,
\r\n
• Protection overload & Dry Run.
\r\n
• Overload & Dry Run percentagesattable
\r\n
• 7 seg. digital display
\r\n
• Display shows Voltage/ current
\r\n
• Display Latch for fault condition.
\r\n
• In Auto mode water level controller for overhead tank
\r\n

Features

\r\n

\r\n
• Suitable for ph. Sub. pumps.
\r\n
• Available for (0.5 HP to 3 Hp pumps.
\r\n
• l6.A MK type 4 pole contactor & upto 9-14 A thermal O/L. relay.
\r\n
• Digital A/V meter for current & voltage Display.
\r\n
• Standard make capacitor with 6 month Warranty
\r\n

\r\n

\r\n

Features

\r\n

\r\n
• Microcontroller based technology.
\r\n
• Useful for Ph. & 3 Ph, 3 to 30 H.-P.
\r\n
• Motor can be operated by mobile on calling or SMS from any destination automatically. (Mobile Network necessary)
\r\n
• You will get Audio feedback or SMS feedback of each operation and protection.
\r\n
• Mobile Auto can Operate from Specific Numbers (4 Nos.) which will be feed by customer for his convenience to avoid misuse of Mobile Auto.
\r\n
• Protection from voltage unbalance, overload, High voltage, low voltage, reverse phasing, single phasing, & Dryrun.
\r\n
• Separate indicator for OK, SPP, N/L. & Mobile ON
\r\n
• In phase reversal condition SPP LED Blinks.
\r\n
• You can direct insert Simeard to this unit,
\r\n
• For details of voice feedback & other information please refer instruction manual with this unit.
\r\n
• Digital display for voltage & current.
\r\n
• Over load Trip current & dry run Trip current shows on display with LED Indicator.
\r\n

Our clients can avail from us Submersible Pump Starters for domestic use which are highly demanded in the market. Our Submersible Pump Starters are manufactured from cutting edge technology and are made as per the international standards. These Submersible Pump Starters are power saving and are economic as well. Available For0.5 to 3 H.P. unitsAttributesThermal Overload ProtectionSuitable for Submersible PumpsVoltage and Current IndicationAutostart facility with on delay timer (1/2/3 min.)