Soar Mlich Engineers

Palghar, Maharashtra

Description:

• Soarmlich engineers field proven gas transmitters continuously monitor for dangerous Concentration of gases. 
• The linearized 4-20 m transmission can interface directly with any Receiving instrument starting from indicators, controllers to large control systems. Provision for Directly connection of buzzer/hooter for alarm through relay. The standard system consists of a compact electronic module housed in a weatherproof or Explosion proof metallic or polyester box with an application specific sensor. This state of the art transmitter is carefully designed with and manufactured with industrial Grade components for reliability, accuracy and long life. It is certified for use in hazardous area class 1, division 1, group b, c & d. (iia, iib or iic) apart from being available in weatherproof enclosure transmiers are equipped With micro controller and are heavily featured with self diagnostics, auto calibration (in case of Toxic, or, combustible gases only)through embedded software, can be done at site. Rs 232/485 output with baud rates of 2400 bps is available as an opons.

Features:

• Complete Automatic Operation.
• LCD Display
• Continuous Diffusion / Suction Sampling
• Confidence Beep every 15 seconds.
• Complete self Integrity check on start
• Automatic Calibration.
• Display of WARN & ALARM 
• Low battery Alarm.

Other Details:

• The advanced Micro controller technology employed makes these Gas Monitors highly dependable, reliable and accurate. The complete automatic operation and calibration feature leaves no scope for user error.
• These Compact, self contained and intrinsically safe designed instruments housed in a weatherproof high impact plastic case are powered with a rechargeable Lithium 3.7V Dc battery.
• On switching 'ON', the instrument goes through its complete self integrity check, and displays factory set Warn and Alarm values before indicating ‘Ready’ for monitoring.
• While in Operation, the instrument monitors the work place continuously giving the latest update concentration of designated Gas through diffusion sampling. Suction sampling is possible with an optional manual or battery operated pump and adaptor. The poison resistant Pellister or long life, integrally mounted electrochemical Sensors with inbuilt cross interference filters are gas specific. Optionally the sensors can be mounted on an extension cable for monitoring inaccessible locations before entry.
• The instrument emits an audible beep every 15 secs that provides confidence to the user that he is well protected. Audio, Visual also Warn and Alarms protect him from hazardous situations.
• The Warn and Alarm Values are factory sets. Low Battery Alarm alerts the user to replace or recharge the Battery. Special features like maximum exposed concentration and TWA readings can be incorporated optionally

Features:

• Advanced MCU for Low-Power Consumption
• LCD display
• Self-Test Function
• Adjustable alarms
• Two Instant Alarm Points
• Audio, Visual LED and Vibratory Indicators 
• Three button Operation for Simple Use
• Strong, Durable Rubber Casing Provides Anti-Slip Handleability
• 500pcs alarming record data logger
• Can be connected with computer Module monitoring, Sensor setup, Alarm record
• Colorful LCD gas curve display
• Available for CO, H2S, O2 and combustible gas
• Rechargeable
• Comply with ATEX

Alarm Point:

• CO: 35 and 200 ppm instant H2S: 10 and 15 ppm instan
• O2: 19.5 by Vol. decreasing and 23.5% by Vol. increasing
• LEL: 20% and 50% LEL

Results in Prevention:

• Of Product loss
• Contamination of Production line
• Damage Equipment Control of Pollution and Emission
• Proven Technology, Time-Tested and Economically Priced Detector. It measures acceptable levels. the Triboelectric effect and determines when particle Emissions exceed the

Description

• Broken Bag Detectors find applications in a wide variety of industries where Detection and control of Dust levels is critical for the Safety, Maintenance, Equipment operation, Plant Efficiency and/or the Environment.  It Provides Reliable and Economical detection of leaks and Filter Failures in Powder and Bulk Solids industries Broken Bag Detectors has LED visual indications and a relay output to maximize its user-friendliness and automation capabilities. It incorporates a specially designed adjustable damping system that increases its response time and prevents False Alarms.
• For Process Flow Application it is a reliable Flow / No Flow Detector to monitor Flow Disruption of dry solids in bulk handling & Pneumatic conveying

Features:

• Field-Proven Triboelectric Technology ensures reliability.
• Direct sensing method; Actual Parcul tei measurement.
• Adaptable, suitable for virtually all dust collectors.
• Damping system to prevent False Alarms.
• Adjustable Sensitivity, Alarm Level and Time Delay to suit a wide variety of Powders and Bulk Solids.
• Robust & Reliable.
• Easy installation. Low maintenance.
• Wide range of duct size from 250 mm to 2m.
• Integral Assembly of Sensor and Electronics in Rugged Housing. 

Application:

• Broken Bag Detectors designed specifically for Broken bag detecon and Leaking Filer deacon in the exhaust duct of bag houses, cartridge collectors, cyclones, and any other collector containing Filters which may break or wear out. 

It finds extensive application following industries

• Ferrous / Non-Ferrous Metals 
• Pharmaceu
• Mining and Minerals 
• Pulp/Paper 
• Fly Ash
• Processing
• Cement 
• Chemical Processing 
• Foundries
• Utilities 
• Food Processing
• Carbon Black