Annex. A Specification for Suction Hose Plant ( Model SXF- 65X50 ) for mfg. hose size: 1 to 4 in.
1. One 65mm Extruder for Soft PVC Extrusion : Single screw extruder having helical speed reduction Gear, 11.25kW(15HP) AC electric motor, AC frequency variable drive & 3 heating zones for barrel heating. Motor make Crompton, Simens, Ngef,Hindustan
2. One 50mm Extruder for Rigid PVC Extrusion : Single screw extruder having helical speed reduction gear, 7.5kW(10HP) AC electric motor, AC frequency variable drive & 3 heating zones for Barrel heating.
Specification for above Soft PVC & Rigid PVC extruders : --
a) Screw & Barrel : Made out from EN � 41B Nitride Steel and dully Nitrided.
b) Barrel Heating & Cooling : 3 Barrel Heating Zones with 2 Zones having Air Blowers.
c) Barrel Feed Zone Cooling : Water cooling jacket near feed zone with water inlet & outlet.
3. Control Panel : Common Heating Control Panel for Soft & Rigid Extruder having :--
a) 3 Temp. Controllers with Heater & Blower O / P for Soft Extruder.
b) 3 Temp. Controllers with Heater & Blower O / P for Rigid Extruder.
c) 2 Temp. Controllers with only Heater O / P for Die & Adapter.
d) 8 Ampere Meter & Heater On / Off Switch for each Heating Zones.
Total heating load for both extruders : 15 kW approx.
4. Die Adapter : One cross Die�Adapter suitable for size ¾� to 6� & 2 Electric Bend Heaters.
5. Profile Die & Nipple : One set for sizes range 3/4� to 6�
6. Former Stand : One Former Stand Suitable for Hose Size up to 4� with 1.5 kW. ( 2 H.P. ) AC Electric Motor and AC Frequency Variable Drive.
7. Formers ( 7 Nos. ) : One each size : 1��, 1 ½� 2� 21/2� 3� 4�
� �
Max. Output Capacity : 110 KgperHour.Depand upon Size
8. Water Cooling Trough : Chilled Water Cooling Trough of total length 107-1/4 feet fabricated from Galvanise Sheet by joining 13 Trough each of 8-1/4� feet long with height adjustable stand.
Total Connected Electric Load : 37 kW. ( 50 H.P ) approx.
Floor Space Recommended : 25� width X 135� length X 15� height.

Annex. A Specification for Suction Hose Plant ( Model SXF- 65X50 ) for mfg. hose size: 1 to 4 in.
1. One 65mm Extruder for Soft PVC Extrusion : Single screw extruder having helical speed reduction Gear, 11.25kW(15HP) AC electric motor, AC frequency variable drive & 3 heating zones for barrel heating. Motor make Crompton, Simens, Ngef,Hindustan
2. One 50mm Extruder for Rigid PVC Extrusion : Single screw extruder having helical speed reduction gear, 7.5kW(10HP) AC electric motor, AC frequency variable drive & 3 heating zones for Barrel heating.
Specification for above Soft PVC & Rigid PVC extruders : --
a) Screw & Barrel : Made out from EN � 41B Nitride Steel and dully Nitrided.
b) Barrel Heating & Cooling : 3 Barrel Heating Zones with 2 Zones having Air Blowers.
c) Barrel Feed Zone Cooling : Water cooling jacket near feed zone with water inlet & outlet.
3. Control Panel : Common Heating Control Panel for Soft & Rigid Extruder having :--
a) 3 Temp. Controllers with Heater & Blower O / P for Soft Extruder.
b) 3 Temp. Controllers with Heater & Blower O / P for Rigid Extruder.
c) 2 Temp. Controllers with only Heater O / P for Die & Adapter.
d) 8 Ampere Meter & Heater On / Off Switch for each Heating Zones.
Total heating load for both extruders : 15 kW approx.
4. Die Adapter : One cross Die�Adapter suitable for size ¾� to 6� & 2 Electric Bend Heaters.
5. Profile Die & Nipple : One set for sizes range 3/4� to 6�
6. Former Stand : One Former Stand Suitable for Hose Size up to 4� with 1.5 kW. ( 2 H.P. ) AC Electric Motor and AC Frequency Variable Drive.
7. Formers ( 7 Nos. ) : One each size : 1��, 1 ½� 2� 21/2� 3� 4�
� �
Max. Output Capacity : 110 KgperHour.Depand upon Size
8. Water Cooling Trough : Chilled Water Cooling Trough of total length 107-1/4 feet fabricated from Galvanise Sheet by joining 13 Trough each of 8-1/4� feet long with height adjustable stand.
Total Connected Electric Load : 37 kW. ( 50 H.P ) approx.
Floor Space Recommended : 25� width X 135� length X 15� height.