Our Products
It is used in electricity supply systems to divide electrical power feed into other circuits. It has a key role in supplying power and protecting permanently installed equipment for building such as power and lighting facilities while providing a protective fuse or circuit breaker for each circuit, in a common enclosure.
Features :
SU BTECH make CLD cum auto changeover, which is a fully automatic high precision system for efficient distribution of individually rationed generator power, is an advantageous and cost effective alternative to conventional manual cha ngeovers. The auto changeover cum current limiting device (CLD) works as a changeover and also gives protection to generator due to overload and abnormal supply. It is a Micro-controlled Pre-Programed overload protection system for multiple operations, mostly used for generators and power backup multi storied societies, malls, apartments etc.
Features:
It is used to overcome problems likes single phasing, reverse phasing and unbalance supply to protect the electrical/electronic appliances.
Features :
BASE
Manual motor starter with MCB
Analog ampere meter & Analog Volt meter
Manual start/ Manual stop by switch
Power on LED indication
Used for oil filled submersible pump
Available in : 1 HP & 1.5 HP
E-BASE
Manual motor starter with MCB
Analog ampere meter & Analog Volt meter
Manual start/ Manual stop by smooth push buttons
Power on & Motor on LED indication
Voltage check button
Used for oil filled & water filled submersible pump
Available in : 1 HP, 1.5 HP, 2 HP & 3 HP
Royal
Digital Overload Relay
Over / Under load cut-off
Over / Under voltage cut-off
Digital Ampere & Volt meter
MCB for Protection
Startup delay time
Push Buttons for Start & Stop
Elegant & Sleek Design
Available in : 1 HP, 1.5 HP, 2 HP, 3 HP, 3 HP (PMC), 5 HP (PMC), 7.5 HP (PMC)
Super Royal
Digital Overload Relay
Digital Water level indication
Over / Under load cut-off
Over / Under voltage cut-off
Digital Ampere & Volt meter
MCB for Protection
Startup delay time
Soft push buttons for Start & Stop
Elegant & Sleek Design
Magnetic float sensor (included) (2 sensors and 4 sensor system available)
Available in : 1 HP, 1.5 HP, 2 HP & 3 HP
Auto main failure panel is used for the automatic operation of the Genset. It monitors the power availability of both “MAINS” and “GENERATOR” automatically, and delivers you the healthy power continuously; on the other hand it will monitor the operation state for Generator while the Generator is running. During abnormal or common faults of generators, AMF Panel will give you both the visual (by LED) and audio signal feedback.
Features :
Availability : 40 Amp. to 500 Amp.
Digital Time Switches are used where electrical equipment must be periodically switched on and off for pre-programmed daily or weekly times. Digital time switches available with only 5 pin timer. The 5 pin model connection is an AC 220 is just like a switch. It can be used for switching to any application individually or with group of appliances.
Features :
Auto changeover the need for continuous power supply and its reliability has increased rapidly over the years, especially in all those areas where continuous power supply is must. Their complexity has increased as continuous information and communications are needed to control automated process, be in industries, commercial complexes, hospitals, hotels or even modern residences. Automatic Changeover from main supply to stand by supply is vital for all the above kinds of load. In case of both DG Supply as well as mains supply, comes together then priority will be of mains because the automatic changeover will change DG supply to mains. In the event of power failure, the standby power is usually expected to take over automatically. Electrical starting equipment, battery bank and diesel generator are required for the automatic operation. The automatic transfer is achieved mostly by AMF Panels. The process of on-load transfer has to be monitored & controlled for a smooth Changeover and within safety limits of all elements of the system.
Features:
Details
Types of Auto Changeover | Rating |
---|---|
Single Phase to Single Phase All inputs & output will be single Phase. |
40A./63A./100A. (Relay base) |
40A. to 100A. (Contactor base) | |
63A. & 100A. (PMC base) | |
Single Phase to Three Phase. DG Input is Single Phase. Mains Input & output will be Three Phase. | 40A./63A./100A1150.A (Relay base) |
40A. to 500A. (Contactor base) | |
63A. to 140A. (PMC base) | |
Three Phase to Three Phase All inputs & output will be Three Phase. |
40A163A./100A./150.A (Relay base) |
40A. to 500A. (Contactor base) | |
63A. to 140A. (PMC base) |
Features:
Additional Information:
Payment Terms :
Delivery Time : 1-2 Months
Solar pumping system consists of four parts: solar panels, solar pump controller, single phase or three phase pump and water drives AC pump to pump water from borehole, river, lake etc. to the storage device. The inverter applies high efficiency MPPT algorithm to maximize power harvested from solar panels. It will make the system to maximize efficiency to get the water as much as possible.
The solar pumping system fulfills concept of low carbon, energy conservation, environmental protection to improve the living standard in water-deficient area.
We are manufacturer ofSemi/Fully Automatic Pump Controller or water level controller for your home and industry. It continuously monitors the liquid level of the overhead tank and reservoir.The Automatic pump controller controls the water pumps and turns it ON and OFF with respect to the level in the water tank. This auto-switching feature saves manpower. Hence no need to operate manually. There for no wastage of water, stop tank overflow, save water & electricity bill.
Features:
It is used to maintain power factor by the use of capacitor bank to suit the variations in inductive/resistive loads. Specially in industrial sector, heavy inductive loads are very common to give low power factor, which results in higher demand charges and also low power factor penalties. APFC panel provides automatic switching operation of the suitable capacitor bank for fixing power factor from load fluctuation.
Features :
Availability : Contactor based and PMC based
SUBTECH series UPVC plastic butterfly valve according to the different medium has a variety of optional material; corrosive resistance is strong, small volume, light weight, extremely non-toxic material. The Mid Stem Structure in this butterfly valve will protect the water leakage from butterfly valve to motor. It is used in industries, multi storied buildings, malls to control the flow of liquids.
Features :
Our team of quality analysts strictly tests each product against varied quality parameters ensuring zero defects at buyer's end. Be it online payment or offline, we make possible for you to make trade transactions as per your convenience. We offer both offline and online mediums to make payment.Automatic Battery Charger for charging generator battery automatically with LED indications and fault protections.
Features :
Availability