Our organization specialize in repairing  and rebuilding of engineering   equipment’s  used in pipelines, i.e, Valve, Pump and Mechanical presses.

To achieve a good quality in refurbishment we have all kinds of workshop as well as testing facilities.

Our factory trained technicians diagnose the exact problem especially occurred at site like leakage, failures, noises and vibration in the product.

In case of repairing and rebuilding we do provide warranty for replacement of items and ensures hundred  percent  workability.

Checking and dismantling are done in our workshop and later testing carried out to ascertain performance, validity.

We have the capability of repairing of  valves of all types ranges from 2” to 24” bore diameter. Industrial Valves like Ball Valves, Globe Valves, Gate Valves, Butterfly Valve, Non Return Valve, Needle Valve, Safety Valve, Relief Valves, Diaphragm Valves, Control Valves, etc. We provide complete valve repairing services for valves of Any Size, Age, Type, Make, Rating, MOC, Temp etc.

Also repairs  any make of  Power Cylinders, actuators , gearbox, manual hand wheel system, valve  interlock  systems.

We repairs all brands of Valve, Actuators& Gearbox :

• Knife edge valve

• Dampers
• Isolation Valve   
• Butterfly valves
• Material Handling Valve
• Dome valve
• Pneumatic Control valves   
• Safety / Pressure Relief valves   
• High Pressure Manual valves       
• Pressure / Vacuum valves   
• Check valves / gate valve
• Flush Bottom / Vessel Discharge valve
• Any make of  Power  Cylinders ,   actuators , gearbox, manual hand wheel system, interlock  system.

Slide Gate valves are typically used as maintenance discharge valves for bins or silos.These valve are dust proof but they are designed to be used in application without pressure or under pressure. Slide gate valves are simple and compact in design, robust in structure, excellence in technology and are easy to install. The slide plate can be actuated by manual, pneumatic, electric or hydraulic means. The slide plate is supported by frictionless rollers to allow for easy actuation.

SIZE RANGE:UP TO - 48 OR 1200 MM (SQUARE & ROUND PORT) AND ABOVE ON REQUEST

Wild rang of material available for different & typical applications.

Sleeve coupling are used to joint to pipes .they are type of flexible joint. Used in ash transporting pipe line . mostly MILD steel or IS 2062 and cast steel material usedin coupling. Coupling seal I are available in verity of rubbers as per working conditions Sizes - 100 NB to 400 NB Standards - IS/BS

We offer premium quality Flow pads combine aeration and vibration and are suitable for material flow applications. Their design creates vibration as the air flows between the pads boot and the hopper wall. This provides an effective flow aid for all types of dry products. Flow pads do not require a specific air pressure for operation.

Alloy cast iron bands and fitting are mostly user in ash handling systems. they are manly two types of 2 D & 3D. working life of 3d types fitting is more then 2D. bothare available in lot of verity of MOC & hardness. Fitting are easily manufacture as per costume to meet his requirement requirements.

Fittings-90 Bend, 45 Bend, Laterals, Tee joints etc. Sizes- 50 NB to 300 NB

Ash Conditioner is used in many industries primarily for pollution control application. The Ash Conditioners are made of abrasion-resistant bolt-on paddles which insuremaximum wear life. The Ash Conditioner is fabricated from steel plate with a rigid base frame with a removable cover plate that provides easy access to internal section.It also houses anti-friction roller bearing support shafts and split type bearing that has dust seals. Ash Conditioners are highly useful in thermal power plants, andsponge iron industry, as they return the recovered dust to the process in a closed circuit. The conditioner effectively blends dust recovered from such equipment aselectrostatic precipitators, mechanical collators, ash silos and bag houses thus allowing transport without the particulate matter escaping into the air.

We are involved in manufacturing and supplying a quality range of Booster Seal. These seals find applications in various industries like Thermal Power Plant. Widely appreciated for high tensile strength and dimensional accuracy, these can obtain in customized solutions as per customer's requirements.

Belt conveyor Idler & roller are used to support the conveyor belt and installed on the groove-shape frame, groove-shape forward inclined idler frames and transition idler frames.Our idlers and rollers are topped off with labyrinth seals to make them waterproof and dustproof. For diameter range from 76mm to 219mm, for belt ranges between450mm to 2500mm in width. which are used in the steel industry, harbor, coal industry, power industry, cement industry, etc

Belt conveyor may also be called adhesive tape conveyor, the conveyor is composed of driving device, frame, pulley, roller, tightening device, safety device, belt, etc.And the belt conveyor we manufacture has the excellent feature of great ability of transportation, simple structure, convenient maintenance, componentsstandardization, etc. The belt conveyor can be used in mine, coal industry for transporting bulk materials or combined materials. Applications: Used in the steelindustry, harbor, coal industry, power industry, cements industry, and more.

We have the capabilities to produce fabrications for any type of industry including all standard types of finish including painting, galvanizing, plating and plastic coating.We fully understand that the cost and 'fit for purpose' of all products is vitally important to any customer, and our experienced team produces work that ensures anycustomers satisfaction. we are dedicated to production of structure steel , mild steel, stainless steel, pipe work, stainless steel furnace and general stainless steel &carbon fabrications all to the highest possible quality at a competitive price and delivered on time, every time. We understand that in order to succeed we have toprovide a complete one stop service from engineering and design by our experienced and qualified CAD drawing office, to installation by our highly trained installationteam.

We have the following capabilities:
Project Management
Our welders are capable of welding carbon steel, various alloys of stainless steel and aluminium
Full Service Drafting, including Structural Steel Detailing, Field Engineering and Reverse Engineering
Certified Welding Operations
Sand Blasting Facilities
Painting and Priming Facilities

Jet Pumps are designed for bottom ash, mill rejects, pyrites and other low capacity applications. The water powered jet pumps transport a mixture of water and solid, granular material through a transport pipeline. Nozzles are made of stainless steel or tungsten carbide and are available in different designs to meet system parameter.

we are specializes in the manufacture and supply of belt conveyor, Wet scrapper conveyor, screw conveyor, pneumatic dust handling system. Our products are manufactured to the highest engineering standard. All equipment'sundergo rigorous quality control.

Cast Basalt is a volcanic rock, which is cast in a similar method to that of cast iron. After annealing, it forms a re-crystallized black ceramic of extreme hardness and abrasion resistance. In addition, it will withstand temperatures of up to 350 Fahrenheit. Linings made of Cast Basalt are proven to last six to ten times longer than steel, cast iron, ni-hard, etc. depending upon impact exposure.

This series dust collector has many advantages, like strong ability and high efficiency of dust removing, low emission concentration, less air leakage rate, low energy and steel consumption, small occupation area, reliable operation, and good economic benefit, etc. And it is mainly used for purifying the dusty gas and recycling materials, widely applied in metallurgy, construction materials, cement, machinery, chemical, electricity, light industries.

Ash Conditioner & Dust Conditioner is used in many industries primarily for pollution control application. The Ash Conditioners are made of abrasion-resistant bolt-on paddles which insure maximum wear life. The Ash Conditioner is fabricated from steel plate with a rigid base frame with a removable cover plate that provides easy access to internal section. It also houses anti-friction roller bearing support shafts and split type bearing that has dust seals. Ash Conditioners are highly useful in thermal power plants, and sponge iron industry, as they return the recovered dust to the process in a closed circuit. The conditioner effectively blends dust recovered from such equipment as electrostatic precipitators, mechanical collators, ash silos and bag houses thus allowing transport without the particulate matter escaping into the air.

Our organization specialize in repairing  and rebuilding of engineering   equipment’s  used in pipelines, i.e, Valve, Pump and Mechanical presses.

To achieve a good quality in refurbishment we have all kinds of workshop as well as testing facilities.

Our factory trained technicians diagnose the exact problem especially occurred at site like leakage, failures, noises and vibration in the product.

In case of repairing and rebuilding we do provide warranty for replacement of items and ensures hundred  percent  workability.

Checking and dismantling are done in our workshop and later testing carried out to ascertain performance, validity.

We have the capability of repairing of  valves of all types ranges from 2” to 24” bore diameter. Industrial Valves like Ball Valves, Globe Valves, Gate Valves, Butterfly Valve, Non Return Valve, Needle Valve, Safety Valve, Relief Valves, Diaphragm Valves, Control Valves, etc. We provide complete valve repairing services for valves of Any Size, Age, Type, Make, Rating, MOC, Temp etc.

Also repairs  any make of  Power Cylinders, actuators , gearbox, manual hand wheel system, valve  interlock  systems.

We repairs all brands of Valve, Actuators& Gearbox :

• Knife edge valve

• Dampers
• Isolation Valve   
• Butterfly valves
• Material Handling Valve
• Dome valve
• Pneumatic Control valves   
• Safety / Pressure Relief valves   
• High Pressure Manual valves       
• Pressure / Vacuum valves   
• Check valves / gate valve
• Flush Bottom / Vessel Discharge valve
• Any make of  Power  Cylinders ,   actuators , gearbox, manual hand wheel system, interlock  system.

Slide Gate valves are typically used as maintenance discharge valves for bins or silos.These valve are dust proof but they are designed to be used in application without pressure or under pressure. Slide gate valves are simple and compact in design, robust in structure, excellence in technology and are easy to install. The slide plate can be actuated by manual, pneumatic, electric or hydraulic means. The slide plate is supported by frictionless rollers to allow for easy actuation.

SIZE RANGE:UP TO - 48 OR 1200 MM (SQUARE & ROUND PORT) AND ABOVE ON REQUEST

Wild rang of material available for different & typical applications.

Sleeve coupling are used to joint to pipes .they are type of flexible joint. Used in ash transporting pipe line . mostly MILD steel or IS 2062 and cast steel material usedin coupling. Coupling seal I are available in verity of rubbers as per working conditions Sizes - 100 NB to 400 NB Standards - IS/BS

We offer premium quality Flow pads combine aeration and vibration and are suitable for material flow applications. Their design creates vibration as the air flows between the pads boot and the hopper wall. This provides an effective flow aid for all types of dry products. Flow pads do not require a specific air pressure for operation.

Alloy cast iron bands and fitting are mostly user in ash handling systems. they are manly two types of 2 D & 3D. working life of 3d types fitting is more then 2D. bothare available in lot of verity of MOC & hardness. Fitting are easily manufacture as per costume to meet his requirement requirements.

Fittings-90 Bend, 45 Bend, Laterals, Tee joints etc. Sizes- 50 NB to 300 NB

Ash Conditioner is used in many industries primarily for pollution control application. The Ash Conditioners are made of abrasion-resistant bolt-on paddles which insuremaximum wear life. The Ash Conditioner is fabricated from steel plate with a rigid base frame with a removable cover plate that provides easy access to internal section.It also houses anti-friction roller bearing support shafts and split type bearing that has dust seals. Ash Conditioners are highly useful in thermal power plants, andsponge iron industry, as they return the recovered dust to the process in a closed circuit. The conditioner effectively blends dust recovered from such equipment aselectrostatic precipitators, mechanical collators, ash silos and bag houses thus allowing transport without the particulate matter escaping into the air.

We are involved in manufacturing and supplying a quality range of Booster Seal. These seals find applications in various industries like Thermal Power Plant. Widely appreciated for high tensile strength and dimensional accuracy, these can obtain in customized solutions as per customer's requirements.

Belt conveyor Idler & roller are used to support the conveyor belt and installed on the groove-shape frame, groove-shape forward inclined idler frames and transition idler frames.Our idlers and rollers are topped off with labyrinth seals to make them waterproof and dustproof. For diameter range from 76mm to 219mm, for belt ranges between450mm to 2500mm in width. which are used in the steel industry, harbor, coal industry, power industry, cement industry, etc

Belt conveyor may also be called adhesive tape conveyor, the conveyor is composed of driving device, frame, pulley, roller, tightening device, safety device, belt, etc.And the belt conveyor we manufacture has the excellent feature of great ability of transportation, simple structure, convenient maintenance, componentsstandardization, etc. The belt conveyor can be used in mine, coal industry for transporting bulk materials or combined materials. Applications: Used in the steelindustry, harbor, coal industry, power industry, cements industry, and more.

We have the capabilities to produce fabrications for any type of industry including all standard types of finish including painting, galvanizing, plating and plastic coating.We fully understand that the cost and 'fit for purpose' of all products is vitally important to any customer, and our experienced team produces work that ensures anycustomers satisfaction. we are dedicated to production of structure steel , mild steel, stainless steel, pipe work, stainless steel furnace and general stainless steel &carbon fabrications all to the highest possible quality at a competitive price and delivered on time, every time. We understand that in order to succeed we have toprovide a complete one stop service from engineering and design by our experienced and qualified CAD drawing office, to installation by our highly trained installationteam.

We have the following capabilities:
Project Management
Our welders are capable of welding carbon steel, various alloys of stainless steel and aluminium
Full Service Drafting, including Structural Steel Detailing, Field Engineering and Reverse Engineering
Certified Welding Operations
Sand Blasting Facilities
Painting and Priming Facilities

Jet Pumps are designed for bottom ash, mill rejects, pyrites and other low capacity applications. The water powered jet pumps transport a mixture of water and solid, granular material through a transport pipeline. Nozzles are made of stainless steel or tungsten carbide and are available in different designs to meet system parameter.

we are specializes in the manufacture and supply of belt conveyor, Wet scrapper conveyor, screw conveyor, pneumatic dust handling system. Our products are manufactured to the highest engineering standard. All equipment'sundergo rigorous quality control.

Cast Basalt is a volcanic rock, which is cast in a similar method to that of cast iron. After annealing, it forms a re-crystallized black ceramic of extreme hardness and abrasion resistance. In addition, it will withstand temperatures of up to 350 Fahrenheit. Linings made of Cast Basalt are proven to last six to ten times longer than steel, cast iron, ni-hard, etc. depending upon impact exposure.

This series dust collector has many advantages, like strong ability and high efficiency of dust removing, low emission concentration, less air leakage rate, low energy and steel consumption, small occupation area, reliable operation, and good economic benefit, etc. And it is mainly used for purifying the dusty gas and recycling materials, widely applied in metallurgy, construction materials, cement, machinery, chemical, electricity, light industries.

Ash Conditioner & Dust Conditioner is used in many industries primarily for pollution control application. The Ash Conditioners are made of abrasion-resistant bolt-on paddles which insure maximum wear life. The Ash Conditioner is fabricated from steel plate with a rigid base frame with a removable cover plate that provides easy access to internal section. It also houses anti-friction roller bearing support shafts and split type bearing that has dust seals. Ash Conditioners are highly useful in thermal power plants, and sponge iron industry, as they return the recovered dust to the process in a closed circuit. The conditioner effectively blends dust recovered from such equipment as electrostatic precipitators, mechanical collators, ash silos and bag houses thus allowing transport without the particulate matter escaping into the air.