Pilot Gaskets And Engineers

Masjid Bunder, Mumbai, Maharashtra

Moderately priced, general purpose steamjointing, most suitable for tde commonly faced requirements in any industry for jointing orgasketing purposes. Warning: Usage of Carcinogenic Asbestos Fiber (CAF) Gasket is dangerous and extreme care must be taken. Follow guidelines as per IS 11769. Pictorial Warning must be displayed on the Equipment as per IS 12081.

Moderately priced, general purpose steamjointing, most suitable for tde commonly faced requirements in any industry for jointing orgasketing purposes.

Warning: Usage of Carcinogenic Asbestos Fiber (CAF) Gasket is dangerous and extreme care must be taken. Follow guidelinesas per IS 11769. Pictorial Warning must be displayed on the Equipment as per IS 12081.

An economonical Non-Asbestos gasket sheet made witd natural fibres and Rubber Solution.An economonical Non-Asbestos gasket sheet made witd natural fibres and Rubber Solution.

PGE Style 2210 is a tight diagonally braided Packing made from pure, expanded, flexible graphite yarn.

Steam, water, fuel, gases, chemicals, mineral and synthetic oils, effluents. Suitable for all processes, except with highly oxidizing media.

Material

Very flexible and supple packing, good alternative to preformed graphite-rings. It combines the advantages of pure graphite rings with the ease of installation of conventional packings, very low coefficient of friction and excellent thermal conductivity; does not age or harden; chemically inert (pH 0-14) except with highly oxidizing media.

Food related equipment, Agitators, blenders, mixers, washers, pulp or any other applications that undergo shaft deflection in normal operating conditions.

Material

Hollow Core Gland Packing are specifically designed to reduce packing wear and shaft / sleeve wear in slow rotating equipments with excessive shaft run out. Hollow Core Packing resists gland follower load and excessive run-out or whip in shaft.

Type

PGE Style 2130 Rubber Core Packing Braided with PTFE

Marine Equipment, Agitator Nutsche Filter, agitator reactor vessels, mixers, Clinker Grinder, etc. in chemical, drugs, dyes and pigments, pesticides and allied process industries, Power Stations etc.

Material

Hollow Core Gland Packing are specifically designed to reduce packing wear and shaft / sleeve wear in slow rotating equipments with excessive shaft run out. Hollow Core Packing resists gland follower load and excessive run-out or whip in shaft.

Type

PGE Style 2150 Rubber Core Packing Braided with Graphite/PTFE

Recommended for Valves handling Superheated and saturated steam, all non oxidizing liquid and gases, hydrocarbons, dyes and chemicals, fuel oil and lube oil etc.

Material

Graphite Gland Packing is reinforced with a multi inconel wire and further jacketed with an inconel wire mesh. The packing is diagonal braided to form a dense but pliable packing, further enhanced with blocking agents. Made as per API Standards. Easy installation and extrusion resistance in single-spool packing.

Type

PGE Style 2730 is a Graphite Gland Packing with Inconel Wire Mesh Jacketted

The chemical resistance of Aramid allows this packing to be used in connection with most chemicals (except very corrosive ones), water, steam, oils, solvents, etc., while its extreme abrasion resistance makes it ideal for use with abrasive sand, slurry and other gritty media.

Material

Braided PTFE Yarn diagonally braided from pure PTFE-yarn, reinforced throughout its body with durable Aramid. Impregnated with PTFE-dispersion and silicone oil. Ideal for rotary and piston pumps, mixers, stirrers, digesters and valves in a wide variety of industries: pulp and paper, petrochemical, sugar, fertilizer, food industry, etc. This can be used in connection with many different media including abrasive ones: cold and hot water, steam, solvents, oils and greases, diluted acids and dyes, brine, sewage, slurries, etc.

Type

PGE Style 2160 Aramid with PTFE Gland Packing

The chemical inertness of PTFE makes this packing suitable for use with nearly all fluids, including the most corrosive acids and alkali, while the FDA conformity allows for use with foodstuffs, pharmaceutical products and potable water.

Material

PGE Style 2120 is very malleable and supple packing with low coefficient of friction, hardly any shaft wear. The filler particles inside the yarn enhance the heat transfer properties as well as lubricant absorption and retention over a longer period. Excellent chemical resistance. Easy to install, needs little gland adjustments.

Type

PGE Style 2120 is a diagonally braided from a newly developed PTFE yarn, filled with highly refined mineral filler particles, and treated with FDA-conform mineral oil. We are pleased to announce ourPGE Style 2120 is now FDA Certified for the Food and Pharma industry.

The chemical resistance of Aramid allows this packing to be used in connection with most chemicals (except very corrosive ones), water, steam, oils, solvents, etc., while its extreme abrasion resistance makes it ideal for use with abrasive sand, slurry and other gritty media.

Material

Extremely tough and durable packing with a chemical compatibility better than PTFE-lubricated asbestos and the unsurpassed mechanical strength of Aramid.

Type

PGE Style 3001 Aramid fiber with Silicon Oil and PTFE Filament binder to give the packing strength and durability.