Features and Benefits
- Formulated for waterproofing protection.
- Elastomeric properties in the product ensure crack bridging ability.
- Strong adhesion to masonary substrates.
- Easy to apply and simple re-coating.
Surface Preparation
- New masonary surfaces must be allowed to cure completely.
- Ensure that the surface is thoroughly cleaned and rendered free of dust, oil, grease, grime, loose particles, algae and fungus etc.
- Check the substrate for its soundness. Small cracks 3mm or less should be
- Opened, cleaned and filled with Surfa Crack Filler. Larger Cracks, damaged
- Portions and hollow areas must be properly repaired.
Application
- Apply a self priming coat of Surfa Damp Shield (diluted with water 31 ratio).
- Apply two perpendicular coats of Surfa Damp Shield
- without dilution.
- Achieve a forced coverage of 25 sq ft/lit/coat.
- Allow to dry for 4-6 hours between coats.
On Vertical Area
- Apply a self priming coat of Surfa Damp Shield
- (diluted with water in 31 ratio).
- Apply 1 coat of Surfa Damp Shield without dilution at the rate of 30-35 sq ft/ltr consumption.
- Apply 2 coats of Surfex Rain Shield-Exterior Emulsion Paint of the desired shade.
- Allow to dry for 4-6 hours between coats.
On Roofs/Terraces
For best performance on terraces, ensure that the product is applied on the entire roof including parapet wall to form a continuous blanket.
GST : 29AAECS3469C1Z9
Write a Review
Mr. Prashanth. U (Surfa Coats India Private Limited)
No. 639, Surfa Sadhana, 46th A Cross, 3rd Block, Rajajinagar, Bangalore, Karnataka - 560010
Share us via
