The suvidha backward curved high volume pressure fan is designed for handling relatively clean air in high pressure applications. Typical applications include combustion air, product cooling, moisture blow-off, forced draft on fluid bed boilers, and induced draft after baghouse process blowers. The suvidha wheel features heavy-guage steel construction and non-overloading wheel design, suitable for applications requiring large volumes of air at moderate to high pressures. All wheels are statically and dynamically balanced for smooth operation prior to assembly of the fan, followed by a final balance of the entire rotating assembly. Performance airflow from 11 900 to 8, 00, 000 cmh, static pressure : up to 1000mm wg wheel size : 500mm to 276mm diameters

When high Efficiency and quite operation required, Suvidha Air Engineers Axial Flow Fan offers an unrivalled solution. This innovative in-line fan is available in diameters from 12 through 36 with capacities ranging to 11400 CFM. Suvidha make Axial Fans utilize an adjustable pitch axial impeller for precise performance matching. The Fan housing is constructed of heavy gauge steel and welded angle ring flanges. The motor base is constructed of welded heavy gauge steel, and form an integral part of the interior fan housing.

By keeping track with the current market development, we are involved in offering optimum quality Industrial Centrifugal Fans. Our offered fans are used in varied industrial applications like drying & filtration system and other processes. In adherence with set industry standards, the provided fans are manufactured with the optimal quality raw material and advanced technology by our dexterous professionals. In addition to this, the fans offered by us can be availed by our precious patrons at industry leading prices.

• The suvidha centrifugal fan is designed to handle large volumes of relatively clean air at low to handle to moderate pressures in applications such as HVAC, combustion air supply, filtration and drying systems, fume hood and spray booth and other exhaust systems, air pollution control (clean side of dust collectors) and other industrial processes.

• Airflow from 774 to 204000 CMH


• Static Pressure: 6 mm to 150 mm WG

With the assistance of our professionals, we are engaged in offering our clients a broad range of Hooded Roof Ventilators. Backed by the team of dexterous professionals, the offered ventilators are manufactured using the optimum quality raw material with the help of modish technology. The ventilators provided by us are used in auditoriums, hostels, workshops, warehouses and other similar places to remove hot air & fumes and makes the place cool.

• Direct drive units are easily maintained no belts or pulleys


• Belt drive units have self-aligning pillow block bearings


• Belt drive units use v-belt drive for low speed operation


• Sizes range from 24 to 60 diameters

• Fume and smoke exhaust


• Make-up air


• Heat exhaust


• General ventilation


• Filtered air supply

We are counted among the leading manufacturers and suppliers of a wide array of High Pressure Blowers. Developed by a team of deft experts as per the quality standards, these products are widely used in various industries for ventilation purpose. These blowers are renowned for their superior performance and are used widely in various applications in rice mill machinery. Their powerful motors are capable of blowing out more air as compared to other blower substitutes in the market. Standard and customized specifications of these are supplied to clients.

Suvidha Air Engineers has available Pressure Blowers with both Radial and Radial tip wheels. It provides for moderate to high pressures with low to moderate air volumes. These performance ranges are achievable due to the high tip speed capability inherent in these blower designs. Usually used in Direct Driven arrangement, but high temperature fan arrangements are available too.

• Maximum single stage pressure 4000 m Gc (multiply by fluid density for pressure in mmwc)


• Maximum single/double stage blower inlet flow rate 72000 m3/hr


• Maximum double stage pressure 8200 m Gc (multiply by fluid density for pressure in mmwc)


• Pressure: 1900 mm wc


• Flow Rate: 20000 CMH


• Speed: 2970 rpm


• Application: Pneumatic Conveying

Bifurcated Axial Fans are designed to move large volumes of hot and/or corrosive air at low pressure. The Bifurcated or split casing diverts the air flow on either side of the motor compartment and rejoins again downstream, leaving the motor open to clean, ambient air outside the casing.

Suvidha Air Engineers unique range of Backward Curved Fans which are designed by specially developed software and experienced Design Head. The Backward curved Centrifugal Fan is designed to handle high Air Volumes at high static pressures. Used to move mostly clean air, our Industrial Fan can be used as a forced draft or induced draft fan for wide range of industrial applications.

Whether standard or custom, Suvidha Make Industrial Fans are designed and built with unmatched quality and backed by responsive, respectable service. We Manufacture Backward curved Fans from different kinds of material like M.S. as well as S.S., M.S. FRP and other special materials.

• Air Volumes up to 300000 CFM


• Static Pressure up to 40 wg


• Temperatures up to 1000 C


• High Static Efficiency up to 78%


• Heavy Duty Construction


• Non-overloading Power curve


• Single Width Single Inlet (SWSI) and Double Width Double Inlet (DWDI), Both are available

We are instrumental in manufacturing SS Centrifugal Fan. Our entire range of centrifugal fan is manufactured by our skilled professional using certified quality M.S, S.S, aluminum. In order to meet the exact requirements of our clients, these centrifugal fans are available in varied sizes & models. Ideal for ventilation purpose, our SS Centrifugal Fan is immensely demanded by varied industries.

• High efficiency


• Stable and vibration free running


• Low power consumption

Centrifugal Roof Ventilators shall be centrifugal Non-Overloading Backward-inclined, Constructed of Aluminum and shall include a wheel cone carefully matched to the inlet cone for precise running tolerances. Wheels shall be statically and dynamically balanced as per IS. Centrifugal Roof Ventilators consist of the motor cover, Shroud, Curb cap and lower Wind band, and shall be constructed of heavy-Gauge G.I. The housing shall Have a rigid internal Support Structure and leak proof design.

• Longer service life


• Accurate dimensions


• Perfect functioning