Swami Tech

Belgaum, Belagavi, Karnataka

Description:

• Embrace Change - with Innovative Technology in Wheel Alignment.
• World’s 1st In-lift 3D Wheel Aligner with 2 cameras & smallest targets.
• World’s smallest target plates for front wheels.
• No fixed beam / column in front of the lift.
• No obstruction of signals due to technician walking around.
• Measurement at floor level.
• Adjustment at any convenient height, No height restrictions.
• Genie 3D Elite can be installed in 11′ X 19′ space.
• No need for minimum distance between Wall and the lift.
• Free space in the shop floor can be effectively utilized.
• Exclusive software take care of automatic lift level compensation.
• Genie is a creatively designed module that houses Hi-definition cameras and electronics to capture images of the targets on wheels.
• Each Genie has 1 camera, making Genie 3D Elite the only aligner in the world using just 2 cameras for an in-lift model.
• Camera not required to be removed & refitted every time.
• User-friendly Wi-Fi enabled tablet device to display alignment results and to operate PC from the Alignment bay, avoids multiple trips to the PC console.
• Cost effective design

Drive Through model camera fitted with individual posts. More suitable for space constraint workshops giving access for free movement in shop without any obstruction due to horizontal beam.

Description:

• Vision based 3D Imaging technology using 2 High Performance SI (Scientific Image) Camera
• Simultaneous Front and Rear wheel alignment (4×4)
• Push Pull Runout /Setback / Thrust angle compensation
• Lift level compensation at adjustment level
• Unlimited memory for vehicle specifications
• Option for selection of vehicle specification during alignment
• Power failure data protection
• Automatic tracking of Left & Right turns for Caster/Kingpin measurements
• Adjustment of Camber in wheel Jacked-up position & Toe curve measurement
• Rear Setback & Track width difference,
• Toe adjustment in single Tie rod vehicle, Vehicle geometry measurements
• Effortless Toe (Easy Toe) adjustment program
• Camber measurement at Zero Toe
• Drag link adjustment
• Toe out on Turns & Lock angle measurements
• Animated pictorial display of angles during alignment
• Zoom in option for live parameters
• Two Color Bar display for adjustment of all angles
• Quick Wheel Alignment program by user defined
• Data Manager Software for storing alignment results
• Customer Address in printout & customer data edit option
• 3-D Pictorial & Two color text printout
• Multi-lingual program & Voice prompt
• Two wheel Alignment program by fixing only front two target plates

Automatic camera beam movement synchronized with movement of the vehicle on the lift. All measurements can be done at floor level and adjustments at any convenient level. Provision for manual height adjustment also.

Description:

• Vision based 3D Imaging technology using 2 High Performance SI (Scientific Image) Camera
• Simultaneous Front and Rear wheel alignment (4×4)
• Push Pull Runout /Setback / Thrust angle compensation
• Lift level compensation at adjustment level
• Unlimited memory for vehicle specifications
• Option for selection of vehicle specification during alignment
• Power failure data protection
• Automatic tracking of Left & Right turns for Caster/Kingpin measurements
• Adjustment of Camber in wheel Jacked-up position & Toe curve measurement
• Rear Setback & Track width difference,
• Toe adjustment in single Tie rod vehicle, Vehicle geometry measurements
• Effortless Toe (Easy Toe) adjustment program
• Camber measurement at Zero Toe
• Drag link adjustment
• Toe out on Turns & Lock angle measurements
• Animated pictorial display of angles during alignment
• Zoom in option for live parameters
• Two Color Bar display for adjustment of all angles
• Quick Wheel Alignment program by user defined
• Data Manager Software for storing alignment results
• Customer Address in printout & customer data edit option
• 3-D Pictorial & Two color text printout
• Multi-lingual program & Voice prompt
• Two wheel Alignment program by fixing only front two target plates

Description:

• Vision based 3D Imaging technology using 2 High Performance SI (Scientific Image) Camera
• Simultaneous Front and Rear wheel alignment (4×4)
• Push Pull Runout /Setback / Thrust angle compensation
• Lift level compensation at adjustment level
• Unlimited memory for vehicle specifications
• Option for selection of vehicle specification during alignment
• Power failure data protection
• Automatic tracking of Left & Right turns for Caster/Kingpin measurements
• Adjustment of Camber in wheel Jacked-up position & Toe curve measurement
• Rear Setback & Track width difference,
• Toe adjustment in single Tie rod vehicle, Vehicle geometry measurements
• Effortless Toe (Easy Toe) adjustment program
• Camber measurement at Zero Toe
• Drag link adjustment
• Toe out on Turns & Lock angle measurements
• Animated pictorial display of angles during alignment
• Zoom in option for live parameters
• Two Color Bar display for adjustment of all angles
• Quick Wheel Alignment program by user defined
• Data Manager Software for storing alignment results
• Customer Address in printout & customer data edit option
• 3-D Pictorial & Two color text printout
• Multi-lingual program & Voice prompt
• Two wheel Alignment program by fixing only front two target plates

Description:

• Vision based 3D Imaging technology using 2 High Performance SI (Scientific Image) Camera
• Simultaneous Front and Rear wheel alignment (4×4)
• Push Pull Runout /Setback / Thrust angle compensation
• Lift level compensation at adjustment level
• Unlimited memory for vehicle specifications
• Option for selection of vehicle specification during alignment
• Power failure data protection
• Automatic tracking of Left & Right turns for Caster/Kingpin measurements
• Adjustment of Camber in wheel Jacked-up position & Toe curve measurement
• Rear Setback & Track width difference,
• Toe adjustment in single Tie rod vehicle, Vehicle geometry measurements
• Effortless Toe (Easy Toe) adjustment program
• Camber measurement at Zero Toe
• Drag link adjustment
• Toe out on Turns & Lock angle measurements
• Animated pictorial display of angles during alignment
• Zoom in option for live parameters
• Two Color Bar display for adjustment of all angles
• Quick Wheel Alignment program by user defined
• Data Manager Software for storing alignment results
• Customer Address in printout & customer data edit option
• 3-D Pictorial & Two color text printout
• Multi-lingual program & Voice prompt
• Two wheel Alignment program by fixing only front two target plates

Description:

• Welcome to the Future in Multi-axle Alignment, Measure all 6 axles under 3 min.
• World’s 1st 3D Wheel Aligner for Multi-Axle Trucks, Buses & Trailers.
• One shot Runout compensation of all 6 axles.
• One shot Caster swing for twin steer axles.
• Innovative Image Processing technology.
• No Electronics on Wheels.
• Mobile stands for storing Wheel brackets & Targets.
• Extra monitor provided to view screen underneath from the PIT.
• Smart control using Wi-Fi enabled tablet & Mobile device to display alignment results and to operate the PC from Alignment bay, Avoids multiple trips to PC console.
• Ideal for all workshops, tyre shops & OEM end of line requirements.