Our Products
glass coat is one of the best products available in the market with solar reflective, thermal insulative and water repellent combined in a single product. With 2kg unit about 200 area can be covered -2coats. Retards the heat flow through the galss considerably. Room temperature will be reduced substantially. Reduces energy consumption of air conditioners etc most economical. No peeling off lasts for years. Easy to apply with spray gun. Colour can be changed
Additional Information:
Payment Terms : L/C, T/T,
Packaging Details : For Domestic Market 2nos or 4nos of Glass Coat -2kg Containers will be packed in single 5PLY Cardboard Box
Delivery Time : 3-7days
Glass Coat
Thermal Insulative Coatings for Plain Glass Panels in different Tints
Cool Tank-019 is one of the best product available in the market with Solar Reflective, Water Repellent properties combined in a single product. With 2kg unit a 200sq.ft surface area can be covered Single Coat. Upto 16*C reduction in surface temperature can be achieved. Most economical. No peeling off. Lasts for years. Easy to apply.
Swish Roofcry1-017 is acrylic copolymer supplied as a ready to use bonding agent in liquid consistency. Roofcryl-017 is acrylic based high performance polymer used for Glossy, Transparent, Waterproof Coating for Granites, Stones, Tiles etc, for Waterproofing Cementitious Coating in slurry form and cement/ sand mortar form, as Top Finishing, Water Repellant Coating for Roof Care Range of Products. The product has excellent waterproofing and protection properties. Roofcry1-017 after drying yields a transparent water repellant and water proof coating on almost all substrates.
Areas of Application
Features & Benefits
Method of Application
Surface Preparation: On Stones, Tiles, Concrete Roof or walls, surface most be free from dust, loose material, paint, oil, or any material which may impair adhesion. Mechanical means such as wire brushing can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. Apply two coats of Roofcryl-017 after proper dilution with potable water, by brush at an interval of 2-3 hours between each coat. Allow the coated surface to air cure for 3 days
Maintenance & Re-Coating of Roofcryl-017
Over a period of time or some years, of Roofcry1-017 on exposure to weathering or extreme temperature variations, it is extremely easy to re-coat over it again, only application of one coat of Roofcryl-017 with proper dilution is enough to extend the life for another couple of years
Post Application Maintenance Clean the surface once in a month with water; Do not Dump any materials on the surface
Precautions & Limitations
Do not apply during rains; substrate must be in SSD condition for application of Roofcry1-017 coat. The product is designed only for foot traffic and not vehicular or movement of machinery or equipment. Never Over dilute Roofcryl-017 with water for ease of application
General Information: If stored and handled in accordance with standard industrial practices no hazardous reactions are known
Safety
General safety precautions such as goggles, gloves, and face shields should be used while handling Roofcryl-017.
Industrial Hygiene: Roofcryl-017 is not harmful for the purpose for which it is Intended and processed. It may irritate skin and mucous membrane on prolonged contact.
Labeling: Roofcryl-017 is non hazardous and doesn't contain substances which have implication for labeling under regulations
Health & Safety Precautions
Skin Contact: Wash skin with soap & water. remove contaminated clothes. On eye contact immediately splash eyes with plenty of water. Consult Physician if irritation persists. Ingestion: not induce vomiting. never give anything by mouth to an unconscious person.
Additional Information:
Payment Terms : T/T
Packaging Details : Plastic cans or bottles packed in Cardboard Cox
Delivery Time : 3-4days