Our Products
A Direct Substitute for Thinner Based Epoxy.
Metal Guard, an innovative Anti-Corrosive, Abrasion Resistive, Water Proof coating
is formulated by us after thorough research and field testing. Metal Guard acts as
anti-corrosive, water proof shield, The active chemical components (mostly imported from
Germany & USA ) in Metal Guard yield a highly anti-corrosive, abrasion resistive flexible
water proof coating and it thus extends the life of Roofs (metal sheets and truss parts) considerably.
It dries very fast by evaporation to yield a tough, flexible, non yellowing abrasion resistive
and water repellent surface. It can be applied on all types of Metal surfaces such as Aluzinc,
Galvalum, G.I. etc.
Additional Information:
Payment Terms : T/T
Packaging Details : Plastic buckets in Cardboard boxes
Delivery Time : 3-4days
roof shield is one of the best product available in the market with solar reflective and waterproofing properties combined in a single product. With 4kg unit a 10' x 10' area can be covered - 3coats. Upto 21*c reduction in surface temperature can be achieved. Room temperature will be reduced substantially. Reduces energy consumption of air conditioners etc by minimum 15% in summer. Most economical. No peeling off makes roof shield unique among similar products. Lasts for years. Easy to apply with brush. Dilution with wate
Additional Information:
Payment Terms : L/C, T/T,
Packaging Details : For Domestic Market 2nos or 4nos. of Roof Shield (4Kg Container) will be packed in 5 PLY Cardboard Box
Delivery Time : 3-7 ydays
Roofin 2K is one of the best product available in the market Acrylic based, cementitious and Fibre reinforced. Ideal for waterproofing of bathroom and similar areas before laying Tiles. To be applied in slurry form with thick painting brush. Wet the surface fully and when the water is almost absorbed, apply the Coating. With 5kg unit a aproximately 65 to 75sq.ft (2coats) area can be covered. Most economical. No peeling off makes Roofin 2k unique among similar products. Lasts for years. U V Resistant. Fast drying.Easy to apply with Brush. Dilution with Water
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : For Domestic Market, 2nos or 4nos of 5kg Paint Bucket containing Roofin-2k will be packed in 5ply Cardboard box.
Delivery Time : 3-7days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : For Domestic Market 2nos. or 4nos. of Seal Crack (4.5Kg Container) are packed in a single 5PLY Cardboard Box before dispatch
Delivery Time : 4-7 days
Roofcryl-017, Acrylic Polymer, Transparent Waterproofing Coating comes in One kg Plastic Bottle. Suitable for Wateproofing or to bring back the original glaze of Granites and Tiles on Walls. Also suitable to use as Waterproofing Coating with White Cement and Water in the Ratio 1:2: 3. Can be used as additive in Cement and Sand paste for all types of Masonry. It makes the paste stronger and Waterproof. Dries very Fast and lasts for years. Dilution with Water.
Additional Information:
Payment Terms : L/C, T/T,
Packaging Details : For Domestic Market, 2 or 4 plastic bottles will be packed in a single 3 PLY Cardboard box before Dispatch
Delivery Time : 3 to 7days
Cool Roof -Jantha is the economy product available in the market with Solar Reflective and Water Repellent properties combined in a single product. With 4kg unit a 10' X 10' area can be covered - 3coats. Upto 12*C reduction in surface temperature can be achieved. Room temperature will be reduced substantially. Reduces Energy consumption of Air Conditioners etc during hot Summer season. Most economical. No peeling off makes Cool Roof-Jantha unique among similar products. Lasts for years. Easy to apply with Brush. Dilution with Water.
Roof Guard, an innovative water proofing/leak arresting 2part compound, is formulated by us after thorough research and field testing. Roof Guard acts as Leak arresting coating. The active chemical components (including imported UV protecting chemicals) in Roof Guard yield a flexible water proof coating. Roof Guard acts like a shield and by its ability to penetrate into micro pores of the substrate thereby reducing the chance of Roof Leakage and lasts long. Roof Guard is a mixture of high grade acrylic resin and specially graded and selected additives. It dries by evaporation to yield a tough, flexible, non yellowing abrasion resistive and water repellent surface. It can be applied on all surfaces such as Concrete and Cementitious surfaces-Roofs & Walls.
Areas of Application
Building roofs / terraces Flat & Sloping and Exterior Walls of Made of Cementitious materials, Concrete, etc.
Method of Application
Surface Preparation: On Concrete Roof or ordinary walls, surface must be free from dust, loose material, paint, oil, or any material which may impair adhesion. Mechanical means such as wire brushing can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. All surface cracks should be made wide at the surface and wet the surface of the crack with hardener by paint brush before applying Crack Sealant in a thick paste form. Apply three coats of Roof Guard after proper mixing and dilution with water by brush at an interval of 2-3 hours between each coat. Allow the coated surface to air cure for 3 days
MAINTENANCE & RE-COATING OF Roof Guard Over a period of time or some years, of Roof Guard on exposure to weathering or extreme temperature variations, it is extremely easy to re-coat over it again, only one coat of application of Roof Guard is enough to extend the life for another couple of years POST APPLICATION MAINTENANCE Clean the surface once in a month with water; Do not Dump any materials on the surface Precautions & Limitations All corners, gaps, joints, protrusions & outlets shall be coated with two extra coats. Do not apply during rains; substrate must be in SSD condition for application of first coat. The product is designed only for foot traffic and not vehicular or movement of machinery or equipment. Do not apply Roof Guard over expansion or moving joints To achieve the full proof waterproofing, parapet walls should be covered with Roof Guard Never Over dilute Roof Guard with water for ease of application
Health & Safety Precautions
Skin Contact: Wash skin with soap & water. remove contaminated clothes. On eye contact: immediately splash eyes with plenty of water. Consult Physician if irritation persists. Ingestion: not induce vomiting. never give anything by mouth to an unconscious person. Call a Physician.
Technical Specification
PROPERTIES | SPECIFICATION | RESULTS |
---|---|---|
Solid Content | 68 | |
Weathering | After 3 years(practical) | No cracking, chalking and discoloration |
Peeling Off | After 3 years(practical) | Free from Peeling Off |
Description
Cool Roofs an innovative, two component acrylic based Elastomeric Solar Reflective, & Water Repellent Coating. The active chemical components (including imported UV protecting chemicals) in Cool Roof yield a flexible water repellant coating and it minimizes the thermal build up. Cool Roofacts like a shield to prevent Roof expansion and contraction besides reducing the chance of Roof Leakage and lasts long and is formulated by as after thorough research and field testing.
Cool Roof is a mixture of high grade acrylic copolymer as binder. and specially graded chemicals and selected additives. It dries by evaporation to yield a tough, flexible, non yellowing and water repellent surface. It can be applied as Top Coat as well as Base Coats on all surfaces such as Concrete, Asbestos, Tiles, Galvalum, Aluzinc and direct coating on Masonry Walls.
Areas of Application : Building roofs / terraces Flat & Sloping and Exterior Walls made of Cementitious materials, Concrete, Asbestos, Tiles, Galvalum, Aluzinc etc.
Method of Application
SURFACE PREPARATION
Surface Preparation: On Concrete Roof or ordinary walls, surface must be free from dust, loose material, paint, oil, or any material which may impair adhesion. Mechanical means such as wire brushing can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. All surface cracks should be made wide at the surface and wet the surface of the crack with hardener by paint brush before applying Crack Sealant in a thick paste form. Apply Cool Roof -3Coats after proper mixing and dilution with water by brush at an interval of 2-3 hours between each coat. Allow the coated surface to air cure for 3 days
MAINTENANCE & RECOATING : OF Cool Roof Over a period of time or some years, of Cool Roof on exposure to weathering or extreme temperature variations, it is extremely easy to re-coat over it again, only one coat of application of Cool Roof is enough to extend the life for another couple of years
POST APPLICATION MAINTENANCE : Clean the surface once in a month with water; Do not Dump any materials on the surface
Precautions & Limitations : All corners, gaps, joints, protrusions & outlets shall be coated with two extra coats. Do not apply during rains; substrate must be in SSD condition for application of Cool Roof Coat. The product is designed only for foot traffic and not vehicular or movement of machinery or equipment. Do not apply Cool Roof over expansion or moving joints To achieve the full proof waterproofing, parapet walls should be covered with Cool Roof Never Over dilute Cool Roof with water for ease of application
Health & Safety Precautions Skin Contact: Wash skin with soap & water. remove contaminated clothes. On eye contact: immediately splash eyes with plenty of water. Consult Physician if irritation persists. Ingestion: not induce vomiting. never give anything by mouth to an unconscious person. Call a Physician.
Technical Specification
PROPERTIES | SPECIFICATION | RESULTS |
---|---|---|
Solid Content | 68 | |
Weathering | After 3 years(practical) | No cracking, chalking and discoloration |
Peeling Off | After 3 years(practical) | Free from Peeling Off |
Download
Roof Shield, an innovative Solar re-radiating compound, is formulated by us after thorough research and field testing. Roof Shield acts as Solar insulator as well as Leak arresting coating. The active chemical components (including imported UV protecting chemicals) in Roof Shield yield a flexible water proof coating and it minimizes the thermal build up. Roof Shield acts like a shield to prevent Roof expansion and contraction besides reducing the chance of Roof Leakage and lasts long. Roof Shield is a mixture of high grade acrylic resin and specially graded chemicals and selected additives. It dries by evaporation to yield a tough, flexible, non yellowing abrasion resistive and water repellent surface. It can be applied on all surfaces such as Concrete, Asbestos, Tiles, Galvalum, Aluzinc etc.
Areas of Application
Method of Application
Surface Preparation: On Concrete Roof or ordinary walls, surface must be free from dust, loose material, paint, oil, or any material which may impair adhesion. Mechanical means such as wire brushing can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. All surface cracks should be made wide at the surface and wet the surface of the crack with hardener by paint brush before applying Crack Sealant in a thick paste form. Apply Three coats of Roof Shield after proper mixing and dilution with water by brush at an interval of 2-3 hours between each coat. Allow the coated surface to air cure for 3 days
MAINTENANCE & RECOATING of Roof Shield Over a period of time or some years, of Roof Shield on exposure to weathering or extreme temperature variations, it is extremely easy to re-coat over it again, only one coat of application of Roof Shield is enough to extend the life for another couple of years
POST APPLICATION MAINTENANCE Clean the surface once in a month with water; Do not Dump any materials on the surface
Precautions & Limitations
All corners, gaps, joints, protrusions & outlets shall be coated with two extra coats. Do not apply during rains; substrate must be in SSD condition for application of Roof Shield-The product is designed only for foot traffic and not vehicular or movement of machinery or equipment. Do not apply Roof Shield over expansion or moving joints To achieve the full proof waterproofing, parapet walls should be covered with Roof Shield Never Over dilute Roof Shield with water for ease of application
Health & Safety Precautions
Skin Contact: Wash skin with soap & water. remove contaminated clothes. On eye contact: immediately splash eyes with plenty of water. Consult Physician if irritation persists. Ingestion: not induce vomiting. never give anything by mouth to an unconscious person. Call a Physician.
Technical Specification
PROPERTIES | SPECIFICATION | RESULTS |
---|---|---|
Solid Content | - | 68 |
Lead Free Coatings | ( < 32mg/kg) | As per ASTM E 1613 – 12 |
Low VOC | ( < 51g/Litre) | As per SCAQMD 304 – 91 |
SRI (Solar Reflective Index) - | 102 | As per ASTM C 1549 – 09 |
Light Reflectance Value | (LRV- 90 ) | As per BS- 8493:2008 + A1 :2010 |
Weathering | After 3 years(practical) | No cracking, chalking and discoloration |
Peeling Off | After 3 years(practical) | Free from Peeling Off |
cool roof -jantha is the economy product available in the market with solar reflective and water repellent combined in a single product. With 4kg unit a 10' x 10' area can be covered - 3coats. Upto 12*c reduction in surface temperature can be achieved. Room temperature will be reduced substantially. Reduces energy consumption of air conditioners etc by minimum 15% in summer. Most economical. No peeling off makes cool roof-jantha unique among similar products. Lasts for years. Easy to apply with brush. Dilution with water. Sq.ft rate will be approximately rs.15/- for 3 coats.
Additional Information:
Payment Terms : L/C, T/T,
Packaging Details : For Domestic Market 2 or 4nos of 4kg containers are packed in a single 5 PLY cardboard box before dispatch
Delivery Time : 3- 7days
Cool Roof * is the best product available in the market with Solar Reflective and Water Repellent combined in a single product. With 4kg unit a 10' X 10' area can be covered - 3coats. Upto 16*C reduction in surface temperature can be achieved. Room temperature will be reduced substantially. Reduces Energy consumption of Air Conditioners etc by minimum 15% in Summer. Most economical. No peeling off makes Cool Roof* unique among similar products. Lasts for years. Easy to apply with Brush. Dilution with Water
Additional Information:
Payment Terms : L/C,
Packaging Details : For Domestic Market 2nos or 4nos of 4kg Paint Container(Cool Roof*) will be packed in one single 5ply Cardboard Box before dispatch.
Delivery Time : 3-7days
Cool Roof*
Solar Reflective & Water Repellent Coating for All types of Roofs & Terraces