White RoofShield Solar Reflective & Waterproof Coating, Packaging Type : 4kg

Listing ID #5549198

Roof Shield, an innovative Solar re-radiating compound, is formulated by us after  thorough research and field testing. Roof Shield acts as Solar insulator as well as Leak arresting coating. The active chemical components (including imported UV protecting chemicals) in Roof Shield  yield a flexible water proof  coating and it minimizes the thermal build up. Roof Shield acts like a shield to prevent Roof expansion and contraction besides reducing the chance of Roof Leakage and lasts long. Roof Shield is a mixture of high grade acrylic resin and specially graded chemicals and selected additives.  It dries by evaporation to yield a tough, flexible, non yellowing abrasion resistive and water repellent surface. It can be applied on all surfaces such as Concrete, Asbestos, Tiles, Galvalum, Aluzinc etc.

Areas of Application 

• Building roofs / terraces — Flat & Sloping and Exterior Walls of 
• Made of Cementitious materials, Concrete, Asbestos, Tiles, Galvalum, Aluzinc etc.

Method of Application  

Surface Preparation: On Concrete Roof or ordinary walls, surface must be free from dust, loose material, paint, oil, or any material which may impair adhesion. Mechanical means such as wire brushing can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. All surface cracks should be made wide at the surface and wet the surface of the crack with hardener by paint brush before applying Crack Sealant in a thick paste form. Apply Three coats of Roof Shield after proper mixing and dilution with water by brush at an interval of 2-3 hours between each coat. Allow the coated surface to air cure for 3 days 

MAINTENANCE & RECOATING of Roof Shield Over a period of time or some years,of Roof Shield on exposure to weathering or extreme temperature variations, it is extremely easy to re-coat over it again, only one coat of application of Roof Shield is enough to extend the life for another couple of years 

POST APPLICATION MAINTENANCE Clean the surface once in a month with water; Do not Dump any materials on the surface 

Precautions & Limitations 

All corners, gaps, joints, protrusions & outlets shall be coated with two extra coats. Do not apply during rains; substrate must be in SSD condition for application of Roof Shield-The product is designed only for foot traffic and not vehicular or movement of machinery or equipment. Do not apply Roof Shield over expansion or moving joints To achieve the full proof waterproofing, parapet walls should be covered with Roof Shield Never Over dilute Roof Shield with water for ease of application 

Health & Safety Precautions 

Skin Contact: Wash skin with soap & water. remove contaminated clothes. On eye contact: immediately splash eyes with plenty of water. Consult Physician if irritation persists. Ingestion: not induce vomiting. never give anything by mouth to an unconscious person. Call a Physician.