Jodhpur, Rajasthan, India
Our Products
Based on direct pressure principle, the pressure blaster emits the abrasive at high velocity that cleans foreign material from surface rapidly. Faster than the suction blaster, Pressure blaster is recommended for removal of scale, rust, corrosion, coating, paints, cleaning of castings and forgings, surface preparation etc.
Syncogrit is a sharp, hard, angular, metallic impact abrasive media ideally suited for extremely fast impact blast cleaning of steel and iron objects. Its friability makes it break down during recycling to form smaller particles, inheriting the same sharp, angular properties and shape as the original particles. This unique feature of SyncogritTM results in faster cleaning rates and high productivity. As the particle shape is constantly maintained the abrasive is highly suitable when repeatable, consistent surface profile and finish is desired. Syncogrit is ideally suited for compressed air blasting application especially when is high production rate is required.
It can be appropriately used in SYNCO compressed air dry blasting machines working on pressure induction suction, and pressure vacuum blasting principles. Being lower in cost it is an economical alternative for steel abrasives. It also offers a viable alternative to copper slag or other expendable abrasive media as it can be recycled up to 50 times.
We at Synco Industries Ltd. manufacture helmets to be used by workers carrying out sand blasting or shot blasting activities in open or blasting rooms. These helmets come along withair breathersandair conditionersand help maximize user comfort and safety during the blasting process.
We also manufacture and supply spare parts for existing helmets including inner visors, outer visors etc.
We at Synco Industries Ltd., manufacture blasting guns of all kinds of shot blasting machines including suction blasting and wet blasting machines. Out blasting guns are compatible with shot blasting machines of any kind or make.
We also develop customized blasting guns for our customers, suited to their blasting machine and purpose.
We manufacture Paint Spray Rooms to help improve painting quality and maintain a pollution free environment. Vacuum is created with the help of Axial Flow fan and thus air is sucked from outside of the paint room. Air enters through Inlet Filters and so air is filtered and dust and other foreign particles are filtered enabling us to prevent deposition of impurities on job being painted.
The air flowing downwards takes the over sprayed paint and passes through paint trap filters where paint particles are filtered and clean air is discharged outside paint room. Paint Trap filters can be replaced periodically.
Syncgar is derived from mined Almandine mineral deposits which is the heaviest and hardest of the all garnet types, resulting in an ideal abrasive grain for blasting applications. Syncgar has sub angular shape leading to extremely fast cutting rates resulting in lower abrasive consumption. The high specific gravity of Syncgar , and its low breakdown rate, results in significantly reduced dust levels, ensuring good operator visibility and lesser risk to personnel or environmental contamination in surrounding areas when compared with other expendable minerallic abrasive media.
The low consumption rate and recyclability up to 5 times reduces the volume of waste for disposal. Being a naturally occurring mineral it is non-polluting to the environment. Syncgar can be used for preparation of steel and non ferrous metal surfaces prior to coating, as cutting media for water jet cutting machines, engraving of stone and glass, cleaning of concrete and brickwork, cleaning of components in contamination sensitive areas, and bonded and coated abrasives.
Based on induction-suction principle, suction blaster is recommend for cleaning & de-buring small and medium size objects. It ensures uniform and continuous cleaning & finishing each time through the automatic abrasive reclaimer unit. Suction blasting is useful for cleaning of dies/moulds, air craft maintenance etc.
Nozzles inboron carbideandtungsten carbide (straight shank andventuritype)for all standard blasting machines includingsuction, pressure, portable, vacuum and wetblasting machines. Specialized nozzles forangular blasting, micro blasting, internal pipe cleaning also available.
We also specialize in developingcustomized carbide nozzles and holdersfor machines of any make or kind.
This machine is the most convienent product to convey in a steel bar or tube. The angle of the diabolos determines the helix and the speed of the forward movement. A wide angle will increase the number of revolutions per foot of forward movement and conversely a narrow angle will decrease the numbers.
The diabolo form of rotation and traversing is used. The loading and unloading is done by means of manipulators. The machine may be used to blast objects in the form/shape of bars, tubes etc.
The rolls are etched for generating desired surface roughness so that the sheets being rolled out can have inbuilt roughness to facilitate proper bonding of paint. Periodically, these rolls are etched for maintaining desired surface roughness. We have developed a Roll Etching machine for this purpose.
The abrasive particles are suspended in liquid, generally water, and pumped to the nozzle in slurry form. The compressed air stream is supplied in the nozzle to increase the velocity and positive pressure when it comes in contact with abrasive slurry. The pressure pump is made up of wear resistant material. Use of wet blaster is recommended for surface finishing operations and light mark.
It is also useful in cleaning, deburing holes and precision cutting tools which are inaccessible by any other method. With use of fine abrasive, a surface can be super finished with wet blasting.
The necessity and importance of effective air pollution equipment is evident in wake of prescribed environment and health/safety norms. We at Synco, help you with the apparatus, custom made to your need, which helps you reduce air pollution in your work-areas. Our air pollution control equipment includes:
In Fabric bag dust collector, dust-laden air is drawn from the blast room into fabric bags of the dust collector with the help of exhaust fan. Dust is retained inside the bags and fresh air goes into atmosphere. The bags shaking mechanism shakes the bags periodically through timer controls to remove dust from bags
We manufacture and supply hand gloves suitable for shot blasting and sand blasting applications. These can be used for workers carrying out shot blasting in open or in blasting rooms. These can also be used for all cabinet type shot blasting machines of any kind or make.
These are tailor-made or custom built machines designed for specific purposes wherein the work pieces may be tumbled, rotated, rolled, carried, even pushed, all according to necessity, convenience and economy. In these machines the work is carried upon hangers suspended from an overhead monorail.
This type of machine may be classed as a single or multiple pass, indexing, spinner hanger or straight through type. Again the machine may be single or multi wheel type depending on the product size and the required output. The overhead conveyor type machine can be designed to carry weights up to 4 tons per hanger.
The layout of monorails circuits may be unlimited in variety. Overhead plants have two outstanding features; continuity of production and flexibility. There are very few workpieces that are not capable of being suspended by some type of suitable hanger.
Restrictive environmental legislation and a greater awareness of health hazards were the main reasons for development of vacuum blasting equipment. The advantages of the equipment are not limited to preventing environmental and health problems, in many applications it is also a fully justified method of surface preparation on an economic basis.
Disposal costs of hazardous waste is minimal by the use of recyclable abrasives, so the amount of abrasives used is much lower than compared with open-blasting. The equipment has many applications. Besides for construction and maintenance of ships, the equipment can also be used for the maintenance of bridges, machinery, power plants or for the renovation of concrete. The machine therefore is commonly found in steel, shipbuilding, offshore and petro-chemical industries apart from other places.
SyncoLite Glass Beads are an established blasting media for air assisted blasting applications using pressure induction, suction and wet blasting principles and is used for cleaning, conditioning or peening metallic surfaces. SyncoLite is manufactured from highgrade crushed and sized glass cullet, which is melted to a spherical shape and annealed for uniform and controlled internal stresses and superior fracture resistance.These transparent spheres which are non abrasive in nature function without any damage to or dimensional change in the surface of the object embedment, contamination or pickup. Depending on the selection of size and operating parameters, SyncoLite achieves desired surface finish and texture from fine matte to bright satin.
Decorative and special effects are achieved by using masking stencils and blasting exposed surfaces with SyncoLite.Critically tolerant objects, dies, moulds, component etc. can be cleaned, deburred, textured without removing any base metal, ensuring the sanctity of the critical tolerances due to the intrinsic quality of Syncolite glass beads. In addition, the inherent strength of glass beads allows it to survive multiple impacts, making it extremely suitable for use in closed cycle blasting equipment fitted with recycling facilities. Being chemically inert, and nontoxic, SyncoLite Glass Beads do not leave any unwanted or ferrous residue on blasted surfaces. Spent media which is not contaminated is environmentally harmless.
Airless Paint Spraying Equipments are suitable where better paint finish, gloss of paint, and aesthetic results of the machine are prime requirements. Apart from this, being high pressure pumps Airless Pumps give high output of paint and thus saves time, man power, paint & cost by giving high efficiency.
It is also possible to spray high build paints for anti corrosive painting with Airless Pump as it generates high pressure which is required to atomize high build paint.
Scrambler - Dry Ice Mill - Undreamt of possibilities! -
Thermobox - Keeps the pellets fresh! -
Compressed air heater - Prevents condensation! -
Pipe robot - Internal pipe cleaner -
One hose system -
- Two hose System -
