Synergie Precision

Mangammanapalya, Bangalore, Karnataka

Simco-IonsAerostat XC Blowerprovidesexcellent coverage, balance stabilty, andrapid static charge decay times. The XC can be used in a variety of electronics and medical assembly environments. It features inherent balance to 0 5V to protect sensitive electronic components. The XC features Simco-Ions emitter point cleaner, an ionization status light and an integrated heater.

• Inherently balanced to 0 5V
• Rapid static charge decay times over a wide area
• Integrated emitter point cleaner
• Ionization status light
• Integrated heater
• Optional air filter

Simco-Ion's fusION AA is simple to install, operate and maintain. Just mount the fusION AA in a convenient location adjacent to the static problem, connect the power supply and compressed gas tubing and fusION AA begins to eliminate static charge. This incredibly compact unit can be installed in places where typical ionizer designs do not fit. Multiple units can be linked together from one optional 24 VDC power source allowing 5 units to be daisy-chained. The air inlet can be positioned in any one of three positions located on consecutive 90 degree angles.

• Air assist connection
• Compact design
• Auto balancing technology
• Visual ionizer status indicator and digital level remote alarm output
• Single power source for multiple fusION ionizers

Air Assist Benefits

Controlled airflow can improve performance of any ionizer. In applications that may benefit from improved airflow use of CDA will result in improved discharge time performance, offset voltage performance and typically extends the interval between emitter cleanings.

Simco-Ions QuadBar 4630 Ionizer is the first corona ionizer to provide safe, effective static charge control in the ambient air inside a process chamber. Its unique quadropole configuration ensures effective ionization as close as 3 inches (7.6 cm) from the product. The 4630s compact size is designed to fit easily into the tight confines of any process equipment, and its ability to run on 24 VDC input power means it can connect to a tools power source.

• Quadropole configuration with IsoStat technology
• Compact size
• 24 VAC or 24 VDC operation
• Available with single crystal silicon emitter points
• Alarm output to FMS or process tool controller

Controller Model 4030

Simco-Ion Model 4030 QuadBar Controller is a convenient solution for powering and monitoring up to 16 QuadBars and 2 AeroBar Model 5685 ionizers for optional AeroBar ionization.

Simco-Ions QuadBar 4630 Ionizer is the first corona ionizer to provide safe, effective static charge control in the ambient air inside a process chamber. Its unique quadropole configuration ensures effective ionization as close as 3 inches (7.6 cm) from the product. The 4630s compact size is designed to fit easily into the tight confines of any process equipment, and its ability to run on 24 VDC input power means it can connect to a tools power source.

• Quadropole configuration with IsoStat technology
• Compact size
• 24 VAC or 24 VDC operation
• Available with single crystal silicon emitter points
• Alarm output to FMS or process tool controller

Controller Model 4030

Simco-Ion Model 4030 QuadBar Controller is a convenient solution for powering and monitoring up to 16 QuadBars and 2 AeroBar Model 5685 ionizers for optional AeroBar ionization.

Simco-Ion'sModel 5810iBloweris designed to provide industry-leading balanced ionization performance in cleanroom environments. The Model 5810i is certified for use in ISO Class 4 cleanrooms (Fed. Std. 209(e) Class 10). The ionizer can operate with external sensors to maintain precise balance (better than 1V) by altering ion output and adapting to environment changes. With the reliability of steady-state DC, the established method for eliminating the effects of ESD and ESD-induced electromagnetic interference (EMI) in high-tech facilities, the Model 5810i delivers maximum ion output where and when you need it.

• 3V or better balance (1V with the optional external feedback system)
• Cleanliness rated at ISO 14644 Class 4 (Fed. Std. 209e Class 10)
• Options for sensor input, FMS connection, alarms, fan speed and management control
• Auto-Clean System option

Simco-IonsModel 5225Digital AeroBar with Software Controlis designed to handle the demanding requirements of in-tool ionization. With high ion output providing fast neutralization of electric charge on wafers, E78 compliance at the most stringent levels can be achieved.

• Complete integration with tool control system
• Fully adjustable parameters for each AeroBar
• Ion current monitoring
• Several lengths available including 3 specifically designed for EFEMs
• Single-crystal silicon emitter points

Interface Module Model 5200-IM6T

Powers and supports up to 6 AeroBar Model 5225 Ionizers, FMS output.

Simco-Ion'sAerostat FPDBlowerhas been designed to control electrostatic charges in assembly and electronics manufacturing applications requiring stable operation withexceptionally fast discharge time performance. The FPD overhead products are built for reliability and simplicity.

• High output, high velocity fans
• Inherently balanced ionization
• Ionization indicator light
• Built-in emitter point cleaner
• Optional fan air filter

Simco-IonsGuardian CR2000 Bloweris designed specifically for use in cleanroom applications. The Guardian CR2000 features a patented circuit that results in balanced delivery of positive and negative ions, which ensures that the unit will maintain an ion balance of 0 5V.Balance stabilityis further enhanced by use of Simco-Ions unique ion shields at the fan outputs toreduce parasitic ion loss.

• Inherently balanced to 0 5V
• Ion balance and ion output monitors
• Lockout key switch
• Silicone-free component surfaces
• Integrated emitter point cleaner

Simco-IonsAerostat Guardian Blowerprovidessuperior static charge decayover an entire work surface area. Equipped with task lighting and an integrated heater, the Guardian offersuser-friendly operationwhile effectively protecting sensitive components from ESD damage.

• Inherently balanced to 0 5V
• Integrated heater and task lights
• AC technology
• Ionization light
• Integrated emitter point cleaner

Simco-Ion'sAirForce Model 6115Blow-off Gun's power makes the AirForce effective in removing particle contamination and ideal for use in clean process applications. The 6115 is the only gun product rated at ISO 14644-1 Class 4 cleanliness (Fed. Std. 209e Class 10 equivalent). Steady-state DC ion emission provides efficient ionization with an average discharge time of less than 1.0 second.

• Ergonomic gun design
• Flexible, lightweight air hose with integral low voltage power cable
• Replaceable emitter point assembly and quick-eject filter
• Strong blow-off force
• Steady-state DC ion emission
• IsoStat technology
• Durable static-dissipative materials
• ISO 14644-1 Class 4 cleanliness operation

Simco-IonsAeroBar Model 5285e IonizerandModel 5024Controllerare designed to control static charge in mini-environments, laminar flow hoods and workstations and has a unique aerodynamic design that ionizes a local area without disrupting laminar flow. Its Pulsed DC technology, combined withoptimized emitter point spacing, providesuniform performanceover the work area.

• Sequenced bipolar ionization
• Unique aerodynamic design
• Individual positive and negative power controls at each bar
• Ion current regulation and operational failure alarm

Controller Model 5024

Simco-Ion'sModel 5024Ionizer Controllerprovides power and control to the Model 5285e AeroBars. The 5024 Controller is available in a standard model that supports up to four ionizers. An enhanced version of the 5024 Controller has the ability to power up to 20 units and includes a local LED alarm along with an audible alarm option that alerts the user of any ionizer failure.

Simco-Ion'sModel 5802iBlowerprovides reliable, fast static charge control for benchtop work areas and small spaces, allowing optimal electrostatics management that minimizes cost and maximizes protection for ESD-sensitive areas. An internal automatic balance correction system ensures ionization continues to reach your target with complete accuracy presenting a significant time and cost savings.

• 3V or better balance (1V with the optional external feedback system)
• Cleanliness rated at ISO 14644 Class 4 (Fed. Std. 209e Class 10)
• Unique airflow directing collimator option
• Options for sensor input, FMS connection, alarms, fan speed and management control
• Auto-Clean system optional

Simco-Ion'sModel 5832Blowerprovides reliable, fast static charge control for benchtop work areas and small spaces, allowing optimal electrostatics management that minimizes cost and maximizes protection for ESD-sensitive areas.The 5832 can operate with an external sensor to maintain precise balance (better than 1V) by altering ion output and adapting to environment changes. With the optional remote sensor or Novx feedback/control, the Model 5832 delivers precisely balanced and directed ionized air to your target without taking up valuable room in your environment. A greater concentration of emitter points and internal circuitry suited for high humidity applications makes the Model 5832 the standard choice for environments that need quality ESD protection with solid design.

• 3V or better balance (1V with the optional external feedback system)
• Cleanliness rated at ISO 14644 Class 4 (Fed. Std. 209e Class 10)
• Options for sensor input, FMS connection, alarms and management control
• Auto-Clean system

Simco-IonsTop Gun 3Ionizing Air Gun is a high-performance ionizing air gun designed for a wide variety of applications. Balanced to 015V, the Top Gun features high blow-off force and low air consumption providing high efficiency cleaning and maximum static charge decay.

• Lightweight, Ergonomic Design
• Flow Control Valve for Adjustable Airflow
• Electrically balanced ion output
• Integrated, Replaceable Filter-Nozzle
• Ionization Indicator Light

For automated assembly, the Top Gun withOptical Sensor, which automatically activates the gun when an object is in range. The Top Gun withSidekickoffers hands-free operation and flexible positioning during assembly and manufacturing processes. A foot pedal controls both ionization and airflow, which reduces compressed air costs and extends the life of the ionizer.

Simco-Ions Novx brand of Passive (Model 3352) and Active (Model 3362) Multi-fan Closed-loop Ionizer Controllers provide the capability to simultaneously detect, measure, record and monitor electrostatic voltages in multiple locations. The versatile antennas used with these systems allow their use in a variety of applications including monitoring sensitive workstations, in-tool voltages, or ionizer performance with the option of closed-loop control to select ionizer products.

• Digital, microprocessor-based controllers, multichannel, digital I/O, auxiliary I/O, local addressability, RS-485/Modbus or Ethernet data output
• Passive (unpowered) and active antenna configurations
• Precision resolution
• Programmable closed-loop control for up to 3 solid state DC ionizer fans or a 3-fan blower
• Programmable alarm set-points with tool shutdown option
• Voltage/polarity displays, local red/green LEDs each channel

Simco-Ion'sModel 5822iBloweris designed to meet small-footprint ionizer requirements in automated process tools, offering exceptional performance in hard disk drive manufacturing and back-end semiconductor environments. The ionizer maintains a 3V or better balance standard and exceptional 1V with the optional external feedback system. An internal, automatic balance correction system ensures your target is ionized accurately, presenting significant reduction in calibration and maintenance time resulting in cost savings.

• 3V or better balance (1V with the optional external feedback system)
• Facility Monitoring System (FMS) connection and audible alarm
• Separate control box
• Cleanliness rated at ISO 14644 Class 4 (Fed. Std. 209e Class 10)
• Separate control box for convenient positioning outside the target area

The pocket-sized Simco-IonModel 775 Handheld Electrostatic Fieldmeteris designed to locate and measure static charge potentials on product, people, equipment and packaging. The Model 775 Fieldmeter uses a non-contacting, chopper stabilized field sensor and a ranging light mechanism to ensure correct measurements of electrostatic fields in all areaseven those using air ionization.

• Digital display
• Distance ranging lights
• Chopper-stabilized circuit
• SAMPLE and HOLD functions
• Battery powered, pocket-sized meter
• Analog output